diff mbox series

[v2,RESEND,1/2] dt-bindings: Input: remove msm-vibrator

Message ID 20200513013140.69935-2-masneyb@onstation.org (mailing list archive)
State Accepted
Commit d364436337007f58356bbe272a0a2adc0fc80d4e
Headers show
Series Input: remove msm-vibrator driver and bindings | expand

Commit Message

Brian Masney May 13, 2020, 1:31 a.m. UTC
The address referenced in this binding is within the Qualcomm Clock
namespace so let's drop the msm-vibrator bindings so that a more
generic solution can be used instead.  No one is currently using these
bindings so this won't affect any users.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/input/msm-vibrator.txt           | 36 -------------------
 1 file changed, 36 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/msm-vibrator.txt

Comments

Dmitry Torokhov May 13, 2020, 3:18 a.m. UTC | #1
On Tue, May 12, 2020 at 09:31:39PM -0400, Brian Masney wrote:
> The address referenced in this binding is within the Qualcomm Clock
> namespace so let's drop the msm-vibrator bindings so that a more
> generic solution can be used instead.  No one is currently using these
> bindings so this won't affect any users.
> 
> Signed-off-by: Brian Masney <masneyb@onstation.org>
> Acked-by: Rob Herring <robh@kernel.org>

Applied, thank you.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
deleted file mode 100644
index 8dcf014ef2e5..000000000000
--- a/Documentation/devicetree/bindings/input/msm-vibrator.txt
+++ /dev/null
@@ -1,36 +0,0 @@ 
-* Device tree bindings for the Qualcomm MSM vibrator
-
-Required properties:
-
-  - compatible: Should be one of
-		"qcom,msm8226-vibrator"
-		"qcom,msm8974-vibrator"
-  - reg: the base address and length of the IO memory for the registers.
-  - pinctrl-names: set to default.
-  - pinctrl-0: phandles pointing to pin configuration nodes. See
-               Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-  - clock-names: set to pwm
-  - clocks: phandle of the clock. See
-            Documentation/devicetree/bindings/clock/clock-bindings.txt
-  - enable-gpios: GPIO that enables the vibrator.
-
-Optional properties:
-
-  - vcc-supply: phandle to the regulator that provides power to the sensor.
-
-Example from a LG Nexus 5 (hammerhead) phone:
-
-vibrator@fd8c3450 {
-	reg = <0xfd8c3450 0x400>;
-	compatible = "qcom,msm8974-vibrator";
-
-	vcc-supply = <&pm8941_l19>;
-
-	clocks = <&mmcc CAMSS_GP1_CLK>;
-	clock-names = "pwm";
-
-	enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&vibrator_pin>;
-};