diff mbox series

[2/6] arm64: dts: qcom: sm8250: Add IPCC

Message ID 20200622222747.717306-3-bjorn.andersson@linaro.org
State New
Headers show
Series arm64: dts: qcom: Enable SM8250 remoteprocs | expand

Commit Message

Bjorn Andersson June 22, 2020, 10:27 p.m. UTC
Add the IPCC node, used to send and receive IPC signals with
remoteprocs.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Manivannan Sadhasivam June 23, 2020, 2:43 a.m. UTC | #1
On Mon, Jun 22, 2020 at 03:27:43PM -0700, Bjorn Andersson wrote:
> Add the IPCC node, used to send and receive IPC signals with
> remoteprocs.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index e583a01cbcf1..74a7ca96177e 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -6,6 +6,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/qcom,gcc-sm8250.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/mailbox/qcom-ipcc.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  
> @@ -329,6 +330,15 @@ gcc: clock-controller@100000 {
>  			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>  		};
>  
> +		ipcc: interrupt-controller@408000 {

ipcc: mailbox@408000

Other than this,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> +			compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
> +			reg = <0 0x00408000 0 0x1000>;
> +			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			#mbox-cells = <2>;
> +		};
> +
>  		qupv3_id_2: geniqup@8c0000 {
>  			compatible = "qcom,geni-se-qup";
>  			reg = <0x0 0x008c0000 0x0 0x6000>;
> -- 
> 2.26.2
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e583a01cbcf1..74a7ca96177e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -6,6 +6,7 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
@@ -329,6 +330,15 @@  gcc: clock-controller@100000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
 		};
 
+		ipcc: interrupt-controller@408000 {
+			compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
 		qupv3_id_2: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x008c0000 0x0 0x6000>;