diff mbox series

[1/2] dt-bindings: interconnect: Add generic qcom bindings

Message ID 20200623040515.23317-2-mdtipton@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series interconnect: qcom: Add common dt-bindings | expand

Commit Message

Mike Tipton June 23, 2020, 4:05 a.m. UTC
Add generic qcom interconnect bindings that are common across platforms. In
particular, these include QCOM_ICC_TAG_* macros that clients can use when
calling icc_set_tag().

Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
---
 include/dt-bindings/interconnect/qcom,icc.h | 26 +++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 include/dt-bindings/interconnect/qcom,icc.h

Comments

Matthias Kaehlcke July 9, 2020, 3:35 p.m. UTC | #1
On Mon, Jun 22, 2020 at 09:05:14PM -0700, Mike Tipton wrote:
> Add generic qcom interconnect bindings that are common across platforms. In
> particular, these include QCOM_ICC_TAG_* macros that clients can use when
> calling icc_set_tag().
> 
> Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
> ---
>  include/dt-bindings/interconnect/qcom,icc.h | 26 +++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 include/dt-bindings/interconnect/qcom,icc.h
> 
> diff --git a/include/dt-bindings/interconnect/qcom,icc.h b/include/dt-bindings/interconnect/qcom,icc.h
> new file mode 100644
> index 000000000000..cd34f36daaaa
> --- /dev/null
> +++ b/include/dt-bindings/interconnect/qcom,icc.h
> @@ -0,0 +1,26 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
> +#define __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
> +
> +/*
> + * The AMC bucket denotes constraints that are applied to hardware when
> + * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
> + * when the execution environment transitions between active and low power mode.
> + */
> +#define QCOM_ICC_BUCKET_AMC		0
> +#define QCOM_ICC_BUCKET_WAKE		1
> +#define QCOM_ICC_BUCKET_SLEEP		2
> +#define QCOM_ICC_NUM_BUCKETS		3
> +
> +#define QCOM_ICC_TAG_AMC		(1 << QCOM_ICC_BUCKET_AMC)
> +#define QCOM_ICC_TAG_WAKE		(1 << QCOM_ICC_BUCKET_WAKE)
> +#define QCOM_ICC_TAG_SLEEP		(1 << QCOM_ICC_BUCKET_SLEEP)
> +#define QCOM_ICC_TAG_ACTIVE_ONLY	(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
> +#define QCOM_ICC_TAG_ALWAYS		(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
> +					 QCOM_ICC_TAG_SLEEP)
> +
> +#endif

Would it make sense to squash the two patches of this series into a
single patch? This would make it more evident that this was moved
from drivers/interconnect/qcom/icc-rpmh.h and avoid duplicate
definitions if only this patch was applied.
Mike Tipton July 9, 2020, 7:45 p.m. UTC | #2
On 7/9/2020 8:35 AM, Matthias Kaehlcke wrote:
> On Mon, Jun 22, 2020 at 09:05:14PM -0700, Mike Tipton wrote:
>> Add generic qcom interconnect bindings that are common across platforms. In
>> particular, these include QCOM_ICC_TAG_* macros that clients can use when
>> calling icc_set_tag().
>>
>> Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
>> ---
>>   include/dt-bindings/interconnect/qcom,icc.h | 26 +++++++++++++++++++++
>>   1 file changed, 26 insertions(+)
>>   create mode 100644 include/dt-bindings/interconnect/qcom,icc.h
>>
>> diff --git a/include/dt-bindings/interconnect/qcom,icc.h b/include/dt-bindings/interconnect/qcom,icc.h
>> new file mode 100644
>> index 000000000000..cd34f36daaaa
>> --- /dev/null
>> +++ b/include/dt-bindings/interconnect/qcom,icc.h
>> @@ -0,0 +1,26 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
>> +#define __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
>> +
>> +/*
>> + * The AMC bucket denotes constraints that are applied to hardware when
>> + * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
>> + * when the execution environment transitions between active and low power mode.
>> + */
>> +#define QCOM_ICC_BUCKET_AMC		0
>> +#define QCOM_ICC_BUCKET_WAKE		1
>> +#define QCOM_ICC_BUCKET_SLEEP		2
>> +#define QCOM_ICC_NUM_BUCKETS		3
>> +
>> +#define QCOM_ICC_TAG_AMC		(1 << QCOM_ICC_BUCKET_AMC)
>> +#define QCOM_ICC_TAG_WAKE		(1 << QCOM_ICC_BUCKET_WAKE)
>> +#define QCOM_ICC_TAG_SLEEP		(1 << QCOM_ICC_BUCKET_SLEEP)
>> +#define QCOM_ICC_TAG_ACTIVE_ONLY	(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
>> +#define QCOM_ICC_TAG_ALWAYS		(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
>> +					 QCOM_ICC_TAG_SLEEP)
>> +
>> +#endif
> 
> Would it make sense to squash the two patches of this series into a
> single patch? This would make it more evident that this was moved
> from drivers/interconnect/qcom/icc-rpmh.h and avoid duplicate
> definitions if only this patch was applied.

Makes sense to me. I'm going to have to move this to my other patch 
series anyway, so I can squash these two and include it in v2 of 
"interconnect: qcom: Misc bcm-voter changes and fixes".
diff mbox series

Patch

diff --git a/include/dt-bindings/interconnect/qcom,icc.h b/include/dt-bindings/interconnect/qcom,icc.h
new file mode 100644
index 000000000000..cd34f36daaaa
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,icc.h
@@ -0,0 +1,26 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
+
+/*
+ * The AMC bucket denotes constraints that are applied to hardware when
+ * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
+ * when the execution environment transitions between active and low power mode.
+ */
+#define QCOM_ICC_BUCKET_AMC		0
+#define QCOM_ICC_BUCKET_WAKE		1
+#define QCOM_ICC_BUCKET_SLEEP		2
+#define QCOM_ICC_NUM_BUCKETS		3
+
+#define QCOM_ICC_TAG_AMC		(1 << QCOM_ICC_BUCKET_AMC)
+#define QCOM_ICC_TAG_WAKE		(1 << QCOM_ICC_BUCKET_WAKE)
+#define QCOM_ICC_TAG_SLEEP		(1 << QCOM_ICC_BUCKET_SLEEP)
+#define QCOM_ICC_TAG_ACTIVE_ONLY	(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
+#define QCOM_ICC_TAG_ALWAYS		(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
+					 QCOM_ICC_TAG_SLEEP)
+
+#endif