diff mbox series

[3/8] arm64: dts: qcom: sdm630: Add tsens node

Message ID 20200623180832.254163-4-konradybcio@gmail.com (mailing list archive)
State New, archived
Headers show
Series SDM630 and Ninges fixes | expand

Commit Message

Konrad Dybcio June 23, 2020, 6:08 p.m. UTC
Enable tsens on this SoC using tsens-v2 driver.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 .../devicetree/bindings/thermal/qcom-tsens.yaml       |  1 +
 arch/arm64/boot/dts/qcom/sdm630.dtsi                  | 11 +++++++++++
 2 files changed, 12 insertions(+)

Comments

Amit Kucheria June 24, 2020, 11:44 a.m. UTC | #1
On Tue, Jun 23, 2020 at 11:39 PM Konrad Dybcio <konradybcio@gmail.com> wrote:
>
> Enable tsens on this SoC using tsens-v2 driver.
>
> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
> ---
>  .../devicetree/bindings/thermal/qcom-tsens.yaml       |  1 +
>  arch/arm64/boot/dts/qcom/sdm630.dtsi                  | 11 +++++++++++
>  2 files changed, 12 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index d7be931b42d2..d89d5acd6e2a 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -39,6 +39,7 @@ properties:
>                - qcom,msm8996-tsens
>                - qcom,msm8998-tsens
>                - qcom,sc7180-tsens
> +              - qcom,sdm630-tsens
>                - qcom,sdm845-tsens
>            - const: qcom,tsens-v2
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index ea85f28032d2..92bf4ae6a590 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -566,6 +566,17 @@ anoc2_smmu: iommu@16c0000 {
>                                 <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
>                 };
>
> +               tsens: thermal-sensor@10ae000 {
> +                       compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
> +                       reg = <0x010ae000 0x1000>, /* TM */
> +                                 <0x010ad000 0x1000>; /* SROT */
> +                       #qcom,sensors = <12>;
> +                       interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> +                                        <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "uplow", "critical";
> +                       #thermal-sensor-cells = <1>;
> +               };
> +

There should be 2 tsens controllers on this platform, the first at
0x010AA000, the other at 0x010AD000.

>                 tcsr_mutex_regs: syscon@1f40000 {
>                         compatible = "syscon";
>                         reg = <0x01f40000 0x20000>;
> --
> 2.27.0
>
Konrad Dybcio June 24, 2020, 3:01 p.m. UTC | #2
Interesting, the downstream DTS only mentions the 0x010AD one..
Are you sure you're not looking at 636/660?

Regards
Konrad
Amit Kucheria June 25, 2020, 5:47 a.m. UTC | #3
On Wed, Jun 24, 2020 at 8:32 PM Konrad Dybcio <konradybcio@gmail.com> wrote:
>
> Interesting, the downstream DTS only mentions the 0x010AD one..
> Are you sure you're not looking at 636/660?
>

I looked a bit closer. So there are two instances of the controller
but the platform doesn't have as many sensors. So using just one
controller is fine. I suspect the other controller might be disabled
in firmware.

Regards,
Amit
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d7be931b42d2..d89d5acd6e2a 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -39,6 +39,7 @@  properties:
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
               - qcom,sc7180-tsens
+              - qcom,sdm630-tsens
               - qcom,sdm845-tsens
           - const: qcom,tsens-v2
 
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index ea85f28032d2..92bf4ae6a590 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -566,6 +566,17 @@  anoc2_smmu: iommu@16c0000 {
 				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		tsens: thermal-sensor@10ae000 {
+			compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
+			reg = <0x010ae000 0x1000>, /* TM */
+				  <0x010ad000 0x1000>; /* SROT */
+			#qcom,sensors = <12>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					 <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x01f40000 0x20000>;