diff mbox series

[REPOST] arm64: dts: qcom: Fix WiFi supplies on sc7180-idp

Message ID 20200625131658.REPOST.1.I32960cd32bb84d6db4127c906d7e371fa29caebf@changeid (mailing list archive)
State Accepted
Commit 6bab7cd0350c3749911859dc3519e22bd31db6df
Headers show
Series [REPOST] arm64: dts: qcom: Fix WiFi supplies on sc7180-idp | expand

Commit Message

Doug Anderson June 25, 2020, 8:17 p.m. UTC
The WiFi supplies that were added recently can't have done anything
useful because they were missing the "-supply" suffix.  Booting
without the "-supply" suffix would give these messages:

ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-0.8-cx-mx not found, using dummy regulator
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.8-xo not found, using dummy regulator
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.3-rfa not found, using dummy regulator
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-3.3-ch0 not found, using dummy regulator

Let's add the "-supply" suffix.

Fixes: 1e7594a38f37 ("arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
I don't have an IDP setup but I have a similar board.  Testing on IDP
would, of course, be appreciated.

Repost because I screwed up the "after-the-cut" notes on first post.

 arch/arm64/boot/dts/qcom/sc7180-idp.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Rakesh Pillai June 26, 2020, 8:44 a.m. UTC | #1
> -----Original Message-----
> From: Douglas Anderson <dianders@chromium.org>
> Sent: Friday, June 26, 2020 1:47 AM
> To: Andy Gross <agross@kernel.org>; Bjorn Andersson
> <bjorn.andersson@linaro.org>
> Cc: Evan Green <evgreen@chromium.org>; Sibi Sankar
> <sibis@codeaurora.org>; Rakesh Pillai <pillair@codeaurora.org>; Douglas
> Anderson <dianders@chromium.org>; Rob Herring <robh+dt@kernel.org>;
> devicetree@vger.kernel.org; linux-arm-msm@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: [REPOST PATCH] arm64: dts: qcom: Fix WiFi supplies on sc7180-idp
> 
> The WiFi supplies that were added recently can't have done anything
> useful because they were missing the "-supply" suffix.  Booting
> without the "-supply" suffix would give these messages:
> 
> ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-0.8-cx-mx not found,
> using dummy regulator
> ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.8-xo not found,
using
> dummy regulator
> ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.3-rfa not found,
using
> dummy regulator
> ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-3.3-ch0 not found,
> using dummy regulator
> 
> Let's add the "-supply" suffix.
> 
> Fixes: 1e7594a38f37 ("arm64: dts: qcom: sc7180: Add WCN3990 WLAN
> module device node")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
Reviewed-by: Rakesh Pillai <pillair@codeaurora.org>

I missed this in the DTSI patch, while manually rebasing to the kernel tip.

> I don't have an IDP setup but I have a similar board.  Testing on IDP
> would, of course, be appreciated.
> 
> Repost because I screwed up the "after-the-cut" notes on first post.
> 
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 39dbfc89689e..472f7f41cc93 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -391,10 +391,10 @@ video-firmware {
> 
>  &wifi {
>  	status = "okay";
> -	vdd-0.8-cx-mx = <&vreg_l9a_0p6>;
> -	vdd-1.8-xo = <&vreg_l1c_1p8>;
> -	vdd-1.3-rfa = <&vreg_l2c_1p3>;
> -	vdd-3.3-ch0 = <&vreg_l10c_3p3>;
> +	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
> +	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
> +	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
> +	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
>  	wifi-firmware {
>  		iommus = <&apps_smmu 0xc2 0x1>;
>  	};
> --
> 2.27.0.212.ge8ba1cc988-goog
Rakesh Pillai July 9, 2020, 8:36 a.m. UTC | #2
> -----Original Message-----
> From: Rakesh Pillai <pillair@codeaurora.org>
> Sent: Friday, June 26, 2020 2:14 PM
> To: 'Douglas Anderson' <dianders@chromium.org>; 'Andy Gross'
> <agross@kernel.org>; 'Bjorn Andersson' <bjorn.andersson@linaro.org>
> Cc: 'Evan Green' <evgreen@chromium.org>; 'Sibi Sankar'
> <sibis@codeaurora.org>; 'Rob Herring' <robh+dt@kernel.org>;
> 'devicetree@vger.kernel.org' <devicetree@vger.kernel.org>; 'linux-arm-
> msm@vger.kernel.org' <linux-arm-msm@vger.kernel.org>; 'linux-
> kernel@vger.kernel.org' <linux-kernel@vger.kernel.org>
> Subject: RE: [REPOST PATCH] arm64: dts: qcom: Fix WiFi supplies on sc7180-
> idp
> 
> 
> 
> > -----Original Message-----
> > From: Douglas Anderson <dianders@chromium.org>
> > Sent: Friday, June 26, 2020 1:47 AM
> > To: Andy Gross <agross@kernel.org>; Bjorn Andersson
> > <bjorn.andersson@linaro.org>
> > Cc: Evan Green <evgreen@chromium.org>; Sibi Sankar
> > <sibis@codeaurora.org>; Rakesh Pillai <pillair@codeaurora.org>; Douglas
> > Anderson <dianders@chromium.org>; Rob Herring <robh+dt@kernel.org>;
> > devicetree@vger.kernel.org; linux-arm-msm@vger.kernel.org; linux-
> > kernel@vger.kernel.org
> > Subject: [REPOST PATCH] arm64: dts: qcom: Fix WiFi supplies on
sc7180-idp
> >
> > The WiFi supplies that were added recently can't have done anything
> > useful because they were missing the "-supply" suffix.  Booting
> > without the "-supply" suffix would give these messages:
> >
> > ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-0.8-cx-mx not found,
> > using dummy regulator
> > ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.8-xo not found,
> using
> > dummy regulator
> > ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.3-rfa not found,
> using
> > dummy regulator
> > ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-3.3-ch0 not found,
> > using dummy regulator
> >
> > Let's add the "-supply" suffix.
> >
> > Fixes: 1e7594a38f37 ("arm64: dts: qcom: sc7180: Add WCN3990 WLAN
> > module device node")
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > ---
> Reviewed-by: Rakesh Pillai <pillair@codeaurora.org>


Tested-by: Rakesh Pillai <pillair@codeaurora.org>

> 
> I missed this in the DTSI patch, while manually rebasing to the kernel
tip.
> 
> > I don't have an IDP setup but I have a similar board.  Testing on IDP
> > would, of course, be appreciated.
> >
> > Repost because I screwed up the "after-the-cut" notes on first post.
> >
> >  arch/arm64/boot/dts/qcom/sc7180-idp.dts | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > index 39dbfc89689e..472f7f41cc93 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > @@ -391,10 +391,10 @@ video-firmware {
> >
> >  &wifi {
> >  	status = "okay";
> > -	vdd-0.8-cx-mx = <&vreg_l9a_0p6>;
> > -	vdd-1.8-xo = <&vreg_l1c_1p8>;
> > -	vdd-1.3-rfa = <&vreg_l2c_1p3>;
> > -	vdd-3.3-ch0 = <&vreg_l10c_3p3>;
> > +	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
> > +	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
> > +	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
> > +	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
> >  	wifi-firmware {
> >  		iommus = <&apps_smmu 0xc2 0x1>;
> >  	};
> > --
> > 2.27.0.212.ge8ba1cc988-goog
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 39dbfc89689e..472f7f41cc93 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -391,10 +391,10 @@  video-firmware {
 
 &wifi {
 	status = "okay";
-	vdd-0.8-cx-mx = <&vreg_l9a_0p6>;
-	vdd-1.8-xo = <&vreg_l1c_1p8>;
-	vdd-1.3-rfa = <&vreg_l2c_1p3>;
-	vdd-3.3-ch0 = <&vreg_l10c_3p3>;
+	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
+	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
 	wifi-firmware {
 		iommus = <&apps_smmu 0xc2 0x1>;
 	};