diff mbox series

[v3,04/14] clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll

Message ID 20200709135251.643-5-jonathan@marek.ca (mailing list archive)
State New, archived
Headers show
Series Enable GPU for SM8150 and SM8250 | expand

Commit Message

Jonathan Marek July 9, 2020, 1:52 p.m. UTC
Lucid PCAL_DONE is different from trion.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/clk-alpha-pll.c | 28 ++++++++++++++++++++++++++--
 drivers/clk/qcom/clk-alpha-pll.h |  2 +-
 2 files changed, 27 insertions(+), 3 deletions(-)

Comments

Stephen Boyd July 24, 2020, 8:52 a.m. UTC | #1
Quoting Jonathan Marek (2020-07-09 06:52:35)
> Lucid PCAL_DONE is different from trion.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---

Applied to clk-next
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index be7ffeae21b1..26139ef005e4 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -143,6 +143,9 @@  EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 #define TRION_PLL_CAL_VAL	0x44
 #define TRION_PCAL_DONE		BIT(26)
 
+/* LUCID PLL specific settings and offsets */
+#define LUCID_PCAL_DONE		BIT(27)
+
 #define pll_alpha_width(p)					\
 		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
 				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
@@ -1447,7 +1450,7 @@  EXPORT_SYMBOL_GPL(clk_trion_pll_configure);
  * The TRION PLL requires a power-on self-calibration which happens when the
  * PLL comes out of reset. Calibrate in case it is not completed.
  */
-static int alpha_pll_trion_prepare(struct clk_hw *hw)
+static int __alpha_pll_trion_prepare(struct clk_hw *hw, u32 pcal_done)
 {
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
 	u32 regval;
@@ -1455,7 +1458,7 @@  static int alpha_pll_trion_prepare(struct clk_hw *hw)
 
 	/* Return early if calibration is not needed. */
 	regmap_read(pll->clkr.regmap, PLL_STATUS(pll), &regval);
-	if (regval & TRION_PCAL_DONE)
+	if (regval & pcal_done)
 		return 0;
 
 	/* On/off to calibrate */
@@ -1466,6 +1469,16 @@  static int alpha_pll_trion_prepare(struct clk_hw *hw)
 	return ret;
 }
 
+static int alpha_pll_trion_prepare(struct clk_hw *hw)
+{
+	return __alpha_pll_trion_prepare(hw, TRION_PCAL_DONE);
+}
+
+static int alpha_pll_lucid_prepare(struct clk_hw *hw)
+{
+	return __alpha_pll_trion_prepare(hw, LUCID_PCAL_DONE);
+}
+
 static int alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,
 				    unsigned long prate)
 {
@@ -1529,6 +1542,17 @@  const struct clk_ops clk_alpha_pll_trion_ops = {
 	.round_rate = clk_alpha_pll_round_rate,
 	.set_rate = alpha_pll_trion_set_rate,
 };
+EXPORT_SYMBOL_GPL(clk_alpha_pll_trion_ops);
+
+const struct clk_ops clk_alpha_pll_lucid_ops = {
+	.prepare = alpha_pll_lucid_prepare,
+	.enable = clk_trion_pll_enable,
+	.disable = clk_trion_pll_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = alpha_pll_trion_set_rate,
+};
 EXPORT_SYMBOL_GPL(clk_alpha_pll_lucid_ops);
 
 const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 67f1fd271931..69337c1b5850 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -132,7 +132,7 @@  extern const struct clk_ops clk_alpha_pll_trion_ops;
 extern const struct clk_ops clk_alpha_pll_fixed_trion_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_trion_ops;
 
-#define clk_alpha_pll_lucid_ops clk_alpha_pll_trion_ops
+extern const struct clk_ops clk_alpha_pll_lucid_ops;
 #define clk_alpha_pll_fixed_lucid_ops clk_alpha_pll_fixed_trion_ops
 extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;