diff mbox series

[v3,05/14] clk: qcom: gcc: remove unnecessary vco_table from SM8150

Message ID 20200709135251.643-6-jonathan@marek.ca (mailing list archive)
State New, archived
Headers show
Series Enable GPU for SM8150 and SM8250 | expand

Commit Message

Jonathan Marek July 9, 2020, 1:52 p.m. UTC
The fixed alpha pll ops only use it for clamping in round_rate, which is
unnecessary. This is consistent with SM8250 GCC not using vco_table.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/gcc-sm8150.c | 10 ----------
 1 file changed, 10 deletions(-)

Comments

Stephen Boyd July 24, 2020, 8:52 a.m. UTC | #1
Quoting Jonathan Marek (2020-07-09 06:52:36)
> The fixed alpha pll ops only use it for clamping in round_rate, which is
> unnecessary. This is consistent with SM8250 GCC not using vco_table.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---

Applied to clk-next
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index d7778def37da..8e9b5b3cceaf 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -34,14 +34,8 @@  enum {
 	P_SLEEP_CLK,
 };
 
-static const struct pll_vco trion_vco[] = {
-	{ 249600000, 2000000000, 0 },
-};
-
 static struct clk_alpha_pll gpll0 = {
 	.offset = 0x0,
-	.vco_table = trion_vco,
-	.num_vco = ARRAY_SIZE(trion_vco),
 	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
 	.clkr = {
 		.enable_reg = 0x52000,
@@ -85,8 +79,6 @@  static struct clk_alpha_pll_postdiv gpll0_out_even = {
 
 static struct clk_alpha_pll gpll7 = {
 	.offset = 0x1a000,
-	.vco_table = trion_vco,
-	.num_vco = ARRAY_SIZE(trion_vco),
 	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
 	.clkr = {
 		.enable_reg = 0x52000,
@@ -105,8 +97,6 @@  static struct clk_alpha_pll gpll7 = {
 
 static struct clk_alpha_pll gpll9 = {
 	.offset = 0x1c000,
-	.vco_table = trion_vco,
-	.num_vco = ARRAY_SIZE(trion_vco),
 	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
 	.clkr = {
 		.enable_reg = 0x52000,