diff mbox series

[RFC,v6,1/8] drivers: thermal: tsens: use get_temp for tsens_valid

Message ID 20200814134123.14566-2-ansuelsmth@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add support for ipq8064 tsens | expand

Commit Message

Christian Marangi Aug. 14, 2020, 1:41 p.m. UTC
Use the driver get_temp function instead of force to use the generic get
temp function. This is needed as tsens v0 version use a custom function
to get the real temperature.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/thermal/qcom/tsens.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Amit Kucheria Nov. 22, 2020, 7:35 p.m. UTC | #1
Hi Ansuel,

My apologies for being tardy in reviewing this series. Career changes...

On Fri, Aug 14, 2020 at 7:12 PM Ansuel Smith <ansuelsmth@gmail.com> wrote:
>
> Use the driver get_temp function instead of force to use the generic get
> temp function. This is needed as tsens v0 version use a custom function
> to get the real temperature.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/thermal/qcom/tsens.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 9af6f71ab640..9fe9a2b26705 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -580,7 +580,6 @@ int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
>  {
>         struct tsens_priv *priv = s->priv;
>         int hw_id = s->hw_id;
> -       u32 temp_idx = LAST_TEMP_0 + hw_id;
>         u32 valid_idx = VALID_0 + hw_id;
>         u32 valid;
>         int ret;
> @@ -600,9 +599,9 @@ int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
>         }
>
>         /* Valid bit is set, OK to read the temperature */
> -       *temp = tsens_hw_to_mC(s, temp_idx);
> +       ret = priv->ops->get_temp(s, temp);

This is wrong.

.get_temp is set to get_temp_tsens_valid() for v1 and v2 platforms. So
you've just broken all those platforms by creating a recursive loop.

I assume you were trying to use the common interrupt code which
currently uses get_temp_tsens_valid()? I suggest trying to add 8960
support to tsens_hw_to_mC().

>
> -       return 0;
> +       return ret;
>  }
>
>  int get_temp_common(const struct tsens_sensor *s, int *temp)
> --
> 2.27.0
>
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 9af6f71ab640..9fe9a2b26705 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -580,7 +580,6 @@  int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
 {
 	struct tsens_priv *priv = s->priv;
 	int hw_id = s->hw_id;
-	u32 temp_idx = LAST_TEMP_0 + hw_id;
 	u32 valid_idx = VALID_0 + hw_id;
 	u32 valid;
 	int ret;
@@ -600,9 +599,9 @@  int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
 	}
 
 	/* Valid bit is set, OK to read the temperature */
-	*temp = tsens_hw_to_mC(s, temp_idx);
+	ret = priv->ops->get_temp(s, temp);
 
-	return 0;
+	return ret;
 }
 
 int get_temp_common(const struct tsens_sensor *s, int *temp)