diff mbox series

[v4,2/6] dt-bindings: interconnect: Add generic qcom bindings

Message ID 20200903192149.30385-3-mdtipton@codeaurora.org (mailing list archive)
State Accepted
Commit 65e0e4d67983dca775fc9ea39f092bc76caa495f
Headers show
Series interconnect: qcom: Misc bcm-voter changes and fixes | expand

Commit Message

Mike Tipton Sept. 3, 2020, 7:21 p.m. UTC 
Add generic qcom interconnect bindings that are common across platforms. In
particular, these include QCOM_ICC_TAG_* macros that clients can use when
calling icc_set_tag().

Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 drivers/interconnect/qcom/icc-rpmh.h        | 18 ++------------
 include/dt-bindings/interconnect/qcom,icc.h | 26 +++++++++++++++++++++
 2 files changed, 28 insertions(+), 16 deletions(-)
 create mode 100644 include/dt-bindings/interconnect/qcom,icc.h
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
index 903d25e61984..cb736b745e1a 100644
--- a/drivers/interconnect/qcom/icc-rpmh.h
+++ b/drivers/interconnect/qcom/icc-rpmh.h
@@ -6,6 +6,8 @@ 
 #ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
 #define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
 
+#include <dt-bindings/interconnect/qcom,icc.h>
+
 #define to_qcom_provider(_provider) \
 	container_of(_provider, struct qcom_icc_provider, provider)
 
@@ -44,22 +46,6 @@  struct bcm_db {
 #define MAX_BCM_PER_NODE	3
 #define MAX_VCD			10
 
-/*
- * The AMC bucket denotes constraints that are applied to hardware when
- * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
- * when the execution environment transitions between active and low power mode.
- */
-#define QCOM_ICC_BUCKET_AMC		0
-#define QCOM_ICC_BUCKET_WAKE		1
-#define QCOM_ICC_BUCKET_SLEEP		2
-#define QCOM_ICC_NUM_BUCKETS		3
-#define QCOM_ICC_TAG_AMC		BIT(QCOM_ICC_BUCKET_AMC)
-#define QCOM_ICC_TAG_WAKE		BIT(QCOM_ICC_BUCKET_WAKE)
-#define QCOM_ICC_TAG_SLEEP		BIT(QCOM_ICC_BUCKET_SLEEP)
-#define QCOM_ICC_TAG_ACTIVE_ONLY	(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
-#define QCOM_ICC_TAG_ALWAYS		(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
-					 QCOM_ICC_TAG_SLEEP)
-
 /**
  * struct qcom_icc_node - Qualcomm specific interconnect nodes
  * @name: the node name used in debugfs
diff --git a/include/dt-bindings/interconnect/qcom,icc.h b/include/dt-bindings/interconnect/qcom,icc.h
new file mode 100644
index 000000000000..cd34f36daaaa
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,icc.h
@@ -0,0 +1,26 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
+
+/*
+ * The AMC bucket denotes constraints that are applied to hardware when
+ * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
+ * when the execution environment transitions between active and low power mode.
+ */
+#define QCOM_ICC_BUCKET_AMC		0
+#define QCOM_ICC_BUCKET_WAKE		1
+#define QCOM_ICC_BUCKET_SLEEP		2
+#define QCOM_ICC_NUM_BUCKETS		3
+
+#define QCOM_ICC_TAG_AMC		(1 << QCOM_ICC_BUCKET_AMC)
+#define QCOM_ICC_TAG_WAKE		(1 << QCOM_ICC_BUCKET_WAKE)
+#define QCOM_ICC_TAG_SLEEP		(1 << QCOM_ICC_BUCKET_SLEEP)
+#define QCOM_ICC_TAG_ACTIVE_ONLY	(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
+#define QCOM_ICC_TAG_ALWAYS		(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
+					 QCOM_ICC_TAG_SLEEP)
+
+#endif