diff mbox series

arm64: dts: qcom: sm8250: use the right clock-freqency for sleep-clk

Message ID 20200903215923.14314-1-jonathan@marek.ca (mailing list archive)
State Accepted
Commit 9ff8b0591fcfdb455ae3797c2b592fa20a57726b
Headers show
Series arm64: dts: qcom: sm8250: use the right clock-freqency for sleep-clk | expand

Commit Message

Jonathan Marek Sept. 3, 2020, 9:59 p.m. UTC
Downstream has this clock as 32000 rate, but testing shows it is close to
32768.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 81aa1f497b13..2cd38053bcd1 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -75,7 +75,7 @@  xo_board: xo-board {
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32768>;
 			#clock-cells = <0>;
 		};
 	};