diff mbox series

arch64: dts: qcom: sm8250: add uart nodes

Message ID 20200909103238.149761-2-dmitry.baryshkov@linaro.org (mailing list archive)
State New, archived
Headers show
Series arch64: dts: qcom: sm8250: add uart nodes | expand

Commit Message

Dmitry Baryshkov Sept. 9, 2020, 10:32 a.m. UTC 
Currently sm8250.dtsi only defines default debug uart. Port rest uart
nodes from the downstream dtsi file.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 74 ++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

Comments

Dmitry Baryshkov Sept. 14, 2020, 9:32 a.m. UTC | #1 
On 09/09/2020 13:32, Dmitry Baryshkov wrote:
> Currently sm8250.dtsi only defines default debug uart. Port rest uart
> nodes from the downstream dtsi file.

Gracious ping for this patch

> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8250.dtsi | 74 ++++++++++++++++++++++++++++
>   1 file changed, 74 insertions(+)
'Manivannan Sadhasivam' Sept. 14, 2020, 10:32 a.m. UTC | #2 
On Wed, Sep 09, 2020 at 01:32:38PM +0300, Dmitry Baryshkov wrote:
> Currently sm8250.dtsi only defines default debug uart. Port rest uart
> nodes from the downstream dtsi file.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 74 ++++++++++++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index e5525df69946..552fa3df9e4f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -551,6 +551,17 @@ spi17: spi@88c000 {
>  				status = "disabled";
>  			};
>  
> +			uart17: serial@88c000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0 0x0088c000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart17_default>;
> +				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
>  			i2c18: i2c@890000 {
>  				compatible = "qcom,geni-i2c";
>  				reg = <0 0x00890000 0 0x4000>;
> @@ -577,6 +588,17 @@ spi18: spi@890000 {
>  				status = "disabled";
>  			};
>  
> +			uart18: serial@890000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0 0x00890000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart18_default>;
> +				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
>  			i2c19: i2c@894000 {
>  				compatible = "qcom,geni-i2c";
>  				reg = <0 0x00894000 0 0x4000>;
> @@ -693,6 +715,17 @@ spi2: spi@988000 {
>  				status = "disabled";
>  			};
>  
> +			uart2: serial@988000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0 0x00988000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart2_default>;
> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
>  			i2c3: i2c@98c000 {
>  				compatible = "qcom,geni-i2c";
>  				reg = <0 0x0098c000 0 0x4000>;
> @@ -797,6 +830,17 @@ spi6: spi@998000 {
>  				status = "disabled";
>  			};
>  
> +			uart6: serial@998000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0 0x00998000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart6_default>;
> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
>  			i2c7: i2c@99c000 {
>  				compatible = "qcom,geni-i2c";
>  				reg = <0 0x0099c000 0 0x4000>;
> @@ -2410,6 +2454,21 @@ config {
>  				};
>  			};
>  
> +			qup_uart2_default: qup-uart2-default {
> +				mux {
> +					pins = "gpio117", "gpio118";
> +					function = "qup2";
> +				};
> +			};
> +
> +			qup_uart6_default: qup-uart6-default {
> +				mux {
> +					pins = "gpio16", "gpio17",
> +						"gpio18", "gpio19";
> +					function = "qup6";
> +				};
> +			};
> +
>  			qup_uart12_default: qup-uart12-default {
>  				mux {
>  					pins = "gpio34", "gpio35";
> @@ -2417,6 +2476,21 @@ mux {
>  				};
>  			};
>  
> +			qup_uart17_default: qup-uart17-default {
> +				mux {
> +					pins = "gpio52", "gpio53",
> +						"gpio54", "gpio55";
> +					function = "qup17";
> +				};
> +			};
> +
> +			qup_uart18_default: qup-uart18-default {
> +				mux {
> +					pins = "gpio58", "gpio59";
> +					function = "qup18";
> +				};
> +			};
> +
>  			pri_mi2s_sck_active: pri-mi2s-sck-active {
>  				mux {
>  					pins = "gpio138";
> -- 
> 2.28.0
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e5525df69946..552fa3df9e4f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -551,6 +551,17 @@  spi17: spi@88c000 {
 				status = "disabled";
 			};
 
+			uart17: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c18: i2c@890000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00890000 0 0x4000>;
@@ -577,6 +588,17 @@  spi18: spi@890000 {
 				status = "disabled";
 			};
 
+			uart18: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c19: i2c@894000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00894000 0 0x4000>;
@@ -693,6 +715,17 @@  spi2: spi@988000 {
 				status = "disabled";
 			};
 
+			uart2: serial@988000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c3: i2c@98c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0098c000 0 0x4000>;
@@ -797,6 +830,17 @@  spi6: spi@998000 {
 				status = "disabled";
 			};
 
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c7: i2c@99c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0099c000 0 0x4000>;
@@ -2410,6 +2454,21 @@  config {
 				};
 			};
 
+			qup_uart2_default: qup-uart2-default {
+				mux {
+					pins = "gpio117", "gpio118";
+					function = "qup2";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default {
+				mux {
+					pins = "gpio16", "gpio17",
+						"gpio18", "gpio19";
+					function = "qup6";
+				};
+			};
+
 			qup_uart12_default: qup-uart12-default {
 				mux {
 					pins = "gpio34", "gpio35";
@@ -2417,6 +2476,21 @@  mux {
 				};
 			};
 
+			qup_uart17_default: qup-uart17-default {
+				mux {
+					pins = "gpio52", "gpio53",
+						"gpio54", "gpio55";
+					function = "qup17";
+				};
+			};
+
+			qup_uart18_default: qup-uart18-default {
+				mux {
+					pins = "gpio58", "gpio59";
+					function = "qup18";
+				};
+			};
+
 			pri_mi2s_sck_active: pri-mi2s-sck-active {
 				mux {
 					pins = "gpio138";