diff mbox series

[v4,09/10] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part

Message ID 20200910140000.324091-10-dmitry.baryshkov@linaro.org (mailing list archive)
State Superseded
Headers show
Series qcom: pm8150: add support for thermal monitoring | expand

Commit Message

Dmitry Baryshkov Sept. 10, 2020, 1:59 p.m. UTC
Define adc-tm5 thermal monitoring part. Individual channes and thermal
zones are to be configured in per-device dts files.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi  | 10 ++++++++++
 arch/arm64/boot/dts/qcom/pm8150b.dtsi | 10 ++++++++++
 arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++
 3 files changed, 30 insertions(+)

Comments

Manivannan Sadhasivam Sept. 14, 2020, 10:40 a.m. UTC | #1
On Thu, Sep 10, 2020 at 04:59:59PM +0300, Dmitry Baryshkov wrote:
> Define adc-tm5 thermal monitoring part. Individual channes and thermal
> zones are to be configured in per-device dts files.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  arch/arm64/boot/dts/qcom/pm8150.dtsi  | 10 ++++++++++
>  arch/arm64/boot/dts/qcom/pm8150b.dtsi | 10 ++++++++++
>  arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++
>  3 files changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> index 1b6406927509..b1b518c6a2c9 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
> @@ -97,6 +97,16 @@ die-temp@6 {
>  			};
>  		};
>  
> +		pm8150_adc_tm: adc-tm@3500 {
> +			compatible = "qcom,spmi-adc-tm5";
> +			reg = <0x3500>;
> +			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> +			#thermal-sensor-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		rtc@6000 {
>  			compatible = "qcom,pm8941-rtc";
>  			reg = <0x6000>;
> diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> index e112e8876db6..8e2f3250c914 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> @@ -95,6 +95,16 @@ chg-temp@9 {
>  			};
>  		};
>  
> +		pm8150b_adc_tm: adc-tm@3500 {
> +			compatible = "qcom,spmi-adc-tm5";
> +			reg = <0x3500>;
> +			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> +			#thermal-sensor-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		pm8150b_gpios: gpio@c000 {
>  			compatible = "qcom,pm8150b-gpio";
>  			reg = <0xc000>;
> diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> index 62139538b7d9..9f214ceec2b7 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> @@ -89,6 +89,16 @@ die-temp@6 {
>  			};
>  		};
>  
> +		pm8150l_adc_tm: adc-tm@3500 {
> +			compatible = "qcom,spmi-adc-tm5";
> +			reg = <0x3500>;
> +			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> +			#thermal-sensor-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		pm8150l_gpios: gpio@c000 {
>  			compatible = "qcom,pm8150l-gpio";
>  			reg = <0xc000>;
> -- 
> 2.28.0
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 1b6406927509..b1b518c6a2c9 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -97,6 +97,16 @@  die-temp@6 {
 			};
 		};
 
+		pm8150_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index e112e8876db6..8e2f3250c914 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -95,6 +95,16 @@  chg-temp@9 {
 			};
 		};
 
+		pm8150b_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pm8150b_gpios: gpio@c000 {
 			compatible = "qcom,pm8150b-gpio";
 			reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index 62139538b7d9..9f214ceec2b7 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -89,6 +89,16 @@  die-temp@6 {
 			};
 		};
 
+		pm8150l_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pm8150l_gpios: gpio@c000 {
 			compatible = "qcom,pm8150l-gpio";
 			reg = <0xc000>;