diff mbox series

[v2,4/4] usb: dwc3: dwc3-qcom: Fix typo in the dwc3 vbus override API

Message ID 20201009082843.28503-5-wcheng@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series Enable USB type C support on SM8150 | expand

Commit Message

Wesley Cheng Oct. 9, 2020, 8:28 a.m. UTC
There was an extra character in the dwc3_qcom_vbus_override_enable()
function.  Removed the extra character.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 340760ef0e01..236afbfe01d9 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -107,7 +107,7 @@  static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val)
 	readl(base + offset);
 }
 
-static void dwc3_qcom_vbus_overrride_enable(struct dwc3_qcom *qcom, bool enable)
+static void dwc3_qcom_vbus_override_enable(struct dwc3_qcom *qcom, bool enable)
 {
 	if (enable) {
 		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
@@ -128,7 +128,7 @@  static int dwc3_qcom_vbus_notifier(struct notifier_block *nb,
 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb);
 
 	/* enable vbus override for device mode */
-	dwc3_qcom_vbus_overrride_enable(qcom, event);
+	dwc3_qcom_vbus_override_enable(qcom, event);
 	qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST;
 
 	return NOTIFY_DONE;
@@ -140,7 +140,7 @@  static int dwc3_qcom_host_notifier(struct notifier_block *nb,
 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb);
 
 	/* disable vbus override in host mode */
-	dwc3_qcom_vbus_overrride_enable(qcom, !event);
+	dwc3_qcom_vbus_override_enable(qcom, !event);
 	qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL;
 
 	return NOTIFY_DONE;
@@ -223,7 +223,7 @@  static int dwc3_qcom_usb_role_switch_set(struct usb_role_switch *sw,
 
 	qcom->mode = (role == USB_ROLE_HOST) ? USB_DR_MODE_HOST :
 					       USB_DR_MODE_PERIPHERAL;
-	dwc3_qcom_vbus_overrride_enable(qcom, enable);
+	dwc3_qcom_vbus_override_enable(qcom, enable);
 	return 0;
 }
 
@@ -750,7 +750,7 @@  static int dwc3_qcom_probe(struct platform_device *pdev)
 
 	/* enable vbus override for device mode */
 	if (qcom->mode == USB_DR_MODE_PERIPHERAL)
-		dwc3_qcom_vbus_overrride_enable(qcom, true);
+		dwc3_qcom_vbus_override_enable(qcom, true);
 
 	if (dwc3_qcom_find_usb_connector(pdev)) {
 		ret = dwc3_qcom_setup_role_switch(qcom);