| Message ID | 20201017043907.2656013-4-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | iommu/arm-smmu-qcom: Support maintaining bootloader mappings | expand |
On 2020-10-17 05:39, Bjorn Andersson wrote: > The firmware found in some Qualcomm platforms intercepts writes to S2CR > in order to replace bypass type streams with fault; and ignore S2CR > updates of type fault. > > Detect this behavior and implement a custom write_s2cr function in order > to trick the firmware into supporting bypass streams by the means of > configuring the stream for translation using a reserved and disabled > context bank. > > Also circumvent the problem of configuring faulting streams by > configuring the stream as bypass. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > Changes since v3: > - Move the reservation of the "identity context bank" to the Qualcomm specific > implementation. > - Implement the S2CR quirk with the newly introduced write_s2cr callback. > > drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 68 ++++++++++++++++++++++ > 1 file changed, 68 insertions(+) > > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > index 0089048342dd..c0f42d6a6e01 100644 > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > @@ -10,8 +10,14 @@ > > struct qcom_smmu { > struct arm_smmu_device smmu; > + bool bypass_cbndx; Nit: variables named "*ndx" usually hold an actual index value. If it's just a flag then maybe name it something like "use_bypass_context"? > }; > > +static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu) > +{ > + return container_of(smmu, struct qcom_smmu, smmu); > +} > + > static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { > { .compatible = "qcom,adreno" }, > { .compatible = "qcom,mdp4" }, > @@ -25,9 +31,32 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { > > static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) > { > + unsigned int last_s2cr = ARM_SMMU_GR0_S2CR(smmu->num_mapping_groups - 1); > + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); > + u32 reg; > u32 smr; > int i; > > + /* > + * With some firmware versions writes to S2CR of type FAULT are > + * ignored, and writing BYPASS will end up written as FAULT in the > + * register. Perform a write to S2CR to detect if this is the case and > + * if so reserve a context bank to emulate bypass streams. > + */ > + reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, S2CR_TYPE_BYPASS) | > + FIELD_PREP(ARM_SMMU_S2CR_CBNDX, 0xff) | > + FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, S2CR_PRIVCFG_DEFAULT); > + arm_smmu_gr0_write(smmu, last_s2cr, reg); > + reg = arm_smmu_gr0_read(smmu, last_s2cr); > + if (FIELD_GET(ARM_SMMU_S2CR_TYPE, reg) != S2CR_TYPE_BYPASS) { > + qsmmu->bypass_cbndx = smmu->num_context_banks - 1; Oh, so maybe the name is in fact OK but the type is wrong :/ I guess this does happens to work out, but for the wrong reason... > + > + set_bit(qsmmu->bypass_cbndx, smmu->context_map); > + > + reg = FIELD_PREP(ARM_SMMU_CBAR_TYPE, CBAR_TYPE_S1_TRANS_S2_BYPASS); > + arm_smmu_gr1_write(smmu, ARM_SMMU_GR1_CBAR(qsmmu->bypass_cbndx), reg); > + } > + > for (i = 0; i < smmu->num_mapping_groups; i++) { > smr = arm_smmu_gr0_read(smmu, ARM_SMMU_GR0_SMR(i)); > > @@ -46,6 +75,44 @@ static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) > return 0; > } > > +static void qcom_smmu_write_s2cr(struct arm_smmu_device *smmu, int idx) > +{ > + struct arm_smmu_s2cr *s2cr = smmu->s2crs + idx; > + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); > + u32 cbndx = s2cr->cbndx; > + u32 type = s2cr->type; > + u32 reg; > + > + if (qsmmu->bypass_cbndx) { Note that if we are talking indices here then 0 would be perfectly valid in general. This works out OK in practice given that we're always reserving the last implemented context above, and if we ever *did* only have one such that index 0 is the last then we're going to have a bad time either way, but it's not necessarily the most obvious. > + if (type == S2CR_TYPE_BYPASS) { > + /* > + * Firmware with quirky S2CR handling will substitute > + * BYPASS writes with FAULT, so point the stream to the > + * reserved context bank and ask for translation on the > + * stream > + */ > + type = S2CR_TYPE_TRANS; > + cbndx = qsmmu->bypass_cbndx; > + } else if (type == S2CR_TYPE_FAULT) { > + /* > + * Firmware with quirky S2CR handling will ignore FAULT > + * writes, so trick it to write FAULT by asking for a > + * BYPASS. > + */ > + type = S2CR_TYPE_BYPASS; Ha, that's brilliant :) > + cbndx = 0xff; > + } > + } > + > + reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, type) | > + FIELD_PREP(ARM_SMMU_S2CR_CBNDX, cbndx) | > + FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, s2cr->privcfg); > + > + if (smmu->features & ARM_SMMU_FEAT_EXIDS && smmu->smrs && smmu->smrs[idx].valid) > + reg |= ARM_SMMU_S2CR_EXIDVALID; Does any of your hardware actually have EXIDS implemented? No big deal if you only want this here "just in case", I'm just curious as I was under then impression that it was essentially a ThunderX special. Other than sorting out bypass_cbndx one way or the other, overall this is now looking about as nice as it ever could - thanks for persevering! Robin. > + arm_smmu_gr0_write(smmu, ARM_SMMU_GR0_S2CR(idx), reg); > +} > + > static int qcom_smmu_def_domain_type(struct device *dev) > { > const struct of_device_id *match = > @@ -87,6 +154,7 @@ static const struct arm_smmu_impl qcom_smmu_impl = { > .cfg_probe = qcom_smmu_cfg_probe, > .def_domain_type = qcom_smmu_def_domain_type, > .reset = qcom_smmu500_reset, > + .write_s2cr = qcom_smmu_write_s2cr, > }; > > struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu) >
On Mon 19 Oct 09:04 CDT 2020, Robin Murphy wrote: > On 2020-10-17 05:39, Bjorn Andersson wrote: > > The firmware found in some Qualcomm platforms intercepts writes to S2CR > > in order to replace bypass type streams with fault; and ignore S2CR > > updates of type fault. > > > > Detect this behavior and implement a custom write_s2cr function in order > > to trick the firmware into supporting bypass streams by the means of > > configuring the stream for translation using a reserved and disabled > > context bank. > > > > Also circumvent the problem of configuring faulting streams by > > configuring the stream as bypass. > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > --- > > > > Changes since v3: > > - Move the reservation of the "identity context bank" to the Qualcomm specific > > implementation. > > - Implement the S2CR quirk with the newly introduced write_s2cr callback. > > > > drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 68 ++++++++++++++++++++++ > > 1 file changed, 68 insertions(+) > > > > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > > index 0089048342dd..c0f42d6a6e01 100644 > > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > > @@ -10,8 +10,14 @@ > > struct qcom_smmu { > > struct arm_smmu_device smmu; > > + bool bypass_cbndx; > > Nit: variables named "*ndx" usually hold an actual index value. If it's just > a flag then maybe name it something like "use_bypass_context"? > > > }; > > +static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu) > > +{ > > + return container_of(smmu, struct qcom_smmu, smmu); > > +} > > + > > static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { > > { .compatible = "qcom,adreno" }, > > { .compatible = "qcom,mdp4" }, > > @@ -25,9 +31,32 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { > > static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) > > { > > + unsigned int last_s2cr = ARM_SMMU_GR0_S2CR(smmu->num_mapping_groups - 1); > > + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); > > + u32 reg; > > u32 smr; > > int i; > > + /* > > + * With some firmware versions writes to S2CR of type FAULT are > > + * ignored, and writing BYPASS will end up written as FAULT in the > > + * register. Perform a write to S2CR to detect if this is the case and > > + * if so reserve a context bank to emulate bypass streams. > > + */ > > + reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, S2CR_TYPE_BYPASS) | > > + FIELD_PREP(ARM_SMMU_S2CR_CBNDX, 0xff) | > > + FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, S2CR_PRIVCFG_DEFAULT); > > + arm_smmu_gr0_write(smmu, last_s2cr, reg); > > + reg = arm_smmu_gr0_read(smmu, last_s2cr); > > + if (FIELD_GET(ARM_SMMU_S2CR_TYPE, reg) != S2CR_TYPE_BYPASS) { > > + qsmmu->bypass_cbndx = smmu->num_context_banks - 1; > > Oh, so maybe the name is in fact OK but the type is wrong :/ > > I guess this does happens to work out, but for the wrong reason... > Odd, but "it works on my machine"... Sorry about that. > > + > > + set_bit(qsmmu->bypass_cbndx, smmu->context_map); > > + > > + reg = FIELD_PREP(ARM_SMMU_CBAR_TYPE, CBAR_TYPE_S1_TRANS_S2_BYPASS); > > + arm_smmu_gr1_write(smmu, ARM_SMMU_GR1_CBAR(qsmmu->bypass_cbndx), reg); > > + } > > + > > for (i = 0; i < smmu->num_mapping_groups; i++) { > > smr = arm_smmu_gr0_read(smmu, ARM_SMMU_GR0_SMR(i)); > > @@ -46,6 +75,44 @@ static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) > > return 0; > > } > > +static void qcom_smmu_write_s2cr(struct arm_smmu_device *smmu, int idx) > > +{ > > + struct arm_smmu_s2cr *s2cr = smmu->s2crs + idx; > > + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); > > + u32 cbndx = s2cr->cbndx; > > + u32 type = s2cr->type; > > + u32 reg; > > + > > + if (qsmmu->bypass_cbndx) { > > Note that if we are talking indices here then 0 would be perfectly valid in > general. This works out OK in practice given that we're always reserving the > last implemented context above, and if we ever *did* only have one such that > index 0 is the last then we're going to have a bad time either way, but it's > not necessarily the most obvious. > Right. In the event that we have a SMMU instance with a single context bank hitting this quirk would probably be bad regardless, as the cfg_probe would have just stolen the only available context bank for bypass purposes :) But I've updated this to keep track of the need for bypass separate from the index. We don't have a lot of SMMU controllers, so it's not a big waste. > > + if (type == S2CR_TYPE_BYPASS) { > > + /* > > + * Firmware with quirky S2CR handling will substitute > > + * BYPASS writes with FAULT, so point the stream to the > > + * reserved context bank and ask for translation on the > > + * stream > > + */ > > + type = S2CR_TYPE_TRANS; > > + cbndx = qsmmu->bypass_cbndx; > > + } else if (type == S2CR_TYPE_FAULT) { > > + /* > > + * Firmware with quirky S2CR handling will ignore FAULT > > + * writes, so trick it to write FAULT by asking for a > > + * BYPASS. > > + */ > > + type = S2CR_TYPE_BYPASS; > > Ha, that's brilliant :) > > > + cbndx = 0xff; > > + } > > + } > > + > > + reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, type) | > > + FIELD_PREP(ARM_SMMU_S2CR_CBNDX, cbndx) | > > + FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, s2cr->privcfg); > > + > > + if (smmu->features & ARM_SMMU_FEAT_EXIDS && smmu->smrs && smmu->smrs[idx].valid) > > + reg |= ARM_SMMU_S2CR_EXIDVALID; > > Does any of your hardware actually have EXIDS implemented? No big deal if > you only want this here "just in case", I'm just curious as I was under then > impression that it was essentially a ThunderX special. > I tested a couple of platforms and I don't think we do. Dropping it makes the code slightly better to read, so let's do that. > Other than sorting out bypass_cbndx one way or the other, overall this is > now looking about as nice as it ever could - thanks for persevering! > Thank you, Bjorn > Robin. > > > + arm_smmu_gr0_write(smmu, ARM_SMMU_GR0_S2CR(idx), reg); > > +} > > + > > static int qcom_smmu_def_domain_type(struct device *dev) > > { > > const struct of_device_id *match = > > @@ -87,6 +154,7 @@ static const struct arm_smmu_impl qcom_smmu_impl = { > > .cfg_probe = qcom_smmu_cfg_probe, > > .def_domain_type = qcom_smmu_def_domain_type, > > .reset = qcom_smmu500_reset, > > + .write_s2cr = qcom_smmu_write_s2cr, > > }; > > struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu) > >
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c index 0089048342dd..c0f42d6a6e01 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c @@ -10,8 +10,14 @@ struct qcom_smmu { struct arm_smmu_device smmu; + bool bypass_cbndx; }; +static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu) +{ + return container_of(smmu, struct qcom_smmu, smmu); +} + static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { { .compatible = "qcom,adreno" }, { .compatible = "qcom,mdp4" }, @@ -25,9 +31,32 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) { + unsigned int last_s2cr = ARM_SMMU_GR0_S2CR(smmu->num_mapping_groups - 1); + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); + u32 reg; u32 smr; int i; + /* + * With some firmware versions writes to S2CR of type FAULT are + * ignored, and writing BYPASS will end up written as FAULT in the + * register. Perform a write to S2CR to detect if this is the case and + * if so reserve a context bank to emulate bypass streams. + */ + reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, S2CR_TYPE_BYPASS) | + FIELD_PREP(ARM_SMMU_S2CR_CBNDX, 0xff) | + FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, S2CR_PRIVCFG_DEFAULT); + arm_smmu_gr0_write(smmu, last_s2cr, reg); + reg = arm_smmu_gr0_read(smmu, last_s2cr); + if (FIELD_GET(ARM_SMMU_S2CR_TYPE, reg) != S2CR_TYPE_BYPASS) { + qsmmu->bypass_cbndx = smmu->num_context_banks - 1; + + set_bit(qsmmu->bypass_cbndx, smmu->context_map); + + reg = FIELD_PREP(ARM_SMMU_CBAR_TYPE, CBAR_TYPE_S1_TRANS_S2_BYPASS); + arm_smmu_gr1_write(smmu, ARM_SMMU_GR1_CBAR(qsmmu->bypass_cbndx), reg); + } + for (i = 0; i < smmu->num_mapping_groups; i++) { smr = arm_smmu_gr0_read(smmu, ARM_SMMU_GR0_SMR(i)); @@ -46,6 +75,44 @@ static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) return 0; } +static void qcom_smmu_write_s2cr(struct arm_smmu_device *smmu, int idx) +{ + struct arm_smmu_s2cr *s2cr = smmu->s2crs + idx; + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); + u32 cbndx = s2cr->cbndx; + u32 type = s2cr->type; + u32 reg; + + if (qsmmu->bypass_cbndx) { + if (type == S2CR_TYPE_BYPASS) { + /* + * Firmware with quirky S2CR handling will substitute + * BYPASS writes with FAULT, so point the stream to the + * reserved context bank and ask for translation on the + * stream + */ + type = S2CR_TYPE_TRANS; + cbndx = qsmmu->bypass_cbndx; + } else if (type == S2CR_TYPE_FAULT) { + /* + * Firmware with quirky S2CR handling will ignore FAULT + * writes, so trick it to write FAULT by asking for a + * BYPASS. + */ + type = S2CR_TYPE_BYPASS; + cbndx = 0xff; + } + } + + reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, type) | + FIELD_PREP(ARM_SMMU_S2CR_CBNDX, cbndx) | + FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, s2cr->privcfg); + + if (smmu->features & ARM_SMMU_FEAT_EXIDS && smmu->smrs && smmu->smrs[idx].valid) + reg |= ARM_SMMU_S2CR_EXIDVALID; + arm_smmu_gr0_write(smmu, ARM_SMMU_GR0_S2CR(idx), reg); +} + static int qcom_smmu_def_domain_type(struct device *dev) { const struct of_device_id *match = @@ -87,6 +154,7 @@ static const struct arm_smmu_impl qcom_smmu_impl = { .cfg_probe = qcom_smmu_cfg_probe, .def_domain_type = qcom_smmu_def_domain_type, .reset = qcom_smmu500_reset, + .write_s2cr = qcom_smmu_write_s2cr, }; struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu)
The firmware found in some Qualcomm platforms intercepts writes to S2CR in order to replace bypass type streams with fault; and ignore S2CR updates of type fault. Detect this behavior and implement a custom write_s2cr function in order to trick the firmware into supporting bypass streams by the means of configuring the stream for translation using a reserved and disabled context bank. Also circumvent the problem of configuring faulting streams by configuring the stream as bypass. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v3: - Move the reservation of the "identity context bank" to the Qualcomm specific implementation. - Implement the S2CR quirk with the newly introduced write_s2cr callback. drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 68 ++++++++++++++++++++++ 1 file changed, 68 insertions(+)