| Message ID | 20201027094338.23110-1-carl.yin@quectel.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | bus: mhi: core: Add support MHI EE FP for download firmware | expand |
On 10/27/2020 3:43 AM, carl.yin@quectel.com wrote: > From: "carl.yin" <carl.yin@quectel.com> > > MHI wwan modems support download firmware to nand or emmc > by firehose protocol, process as next: > 1. wwan modem normal bootup and enter EE AMSS, create mhi DIAG chan device > 2. send EDL cmd via DIAG chan, then modem enter EE EDL > 3. boot.c download 'firehose/prog_firehose_sdx55.mbn' via BHI interface > 4. modem enter EE FP, and create mhi EDL chan device > 5. user space tool download FW to modem via EDL chan by firehose protocol > > Signed-off-by: carl.yin <carl.yin@quectel.com> > --- > drivers/bus/mhi/core/boot.c | 4 +++- > drivers/bus/mhi/core/init.c | 2 ++ > drivers/bus/mhi/core/internal.h | 1 + > drivers/bus/mhi/core/main.c | 3 +++ > drivers/bus/mhi/core/pm.c | 16 +++++++++++++++- > include/linux/mhi.h | 4 +++- > 6 files changed, 27 insertions(+), 3 deletions(-) > > diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c > index 24422f5..ab39ad6 100644 > --- a/drivers/bus/mhi/core/boot.c > +++ b/drivers/bus/mhi/core/boot.c > @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) > return; > } > > - if (mhi_cntrl->ee == MHI_EE_EDL) > + if (mhi_cntrl->ee == MHI_EE_EDL) { > + mhi_ready_state_transition(mhi_cntrl); > return; > + } > > write_lock_irq(&mhi_cntrl->pm_lock); > mhi_cntrl->dev_state = MHI_STATE_RESET; > diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c > index ac4aa5c..9c2c2f3 100644 > --- a/drivers/bus/mhi/core/init.c > +++ b/drivers/bus/mhi/core/init.c > @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = { > [MHI_EE_WFW] = "WFW", > [MHI_EE_PTHRU] = "PASS THRU", > [MHI_EE_EDL] = "EDL", > + [MHI_EE_FP] = "FP", > [MHI_EE_DISABLE_TRANSITION] = "DISABLE", > [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED", > }; > @@ -35,6 +36,7 @@ const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX] = { > [DEV_ST_TRANSITION_READY] = "READY", > [DEV_ST_TRANSITION_SBL] = "SBL", > [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE", > + [DEV_ST_TRANSITION_FP] = "FP", > [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR", > [DEV_ST_TRANSITION_DISABLE] = "DISABLE", > }; > diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h > index 4abf0cf..6ae897a 100644 > --- a/drivers/bus/mhi/core/internal.h > +++ b/drivers/bus/mhi/core/internal.h > @@ -386,6 +386,7 @@ enum dev_st_transition { > DEV_ST_TRANSITION_READY, > DEV_ST_TRANSITION_SBL, > DEV_ST_TRANSITION_MISSION_MODE, > + DEV_ST_TRANSITION_FP, > DEV_ST_TRANSITION_SYS_ERR, > DEV_ST_TRANSITION_DISABLE, > DEV_ST_TRANSITION_MAX, > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c > index 3950792..e307b58 100644 > --- a/drivers/bus/mhi/core/main.c > +++ b/drivers/bus/mhi/core/main.c > @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl, > case MHI_EE_SBL: > st = DEV_ST_TRANSITION_SBL; > break; > + case MHI_EE_FP: > + st = DEV_ST_TRANSITION_FP; > + break; > case MHI_EE_WFW: > case MHI_EE_AMSS: > st = DEV_ST_TRANSITION_MISSION_MODE; > diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c > index 3de7b16..3c95a5d 100644 > --- a/drivers/bus/mhi/core/pm.c > +++ b/drivers/bus/mhi/core/pm.c > @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl, > } > > if (cur_state == MHI_PM_SYS_ERR_PROCESS) { > - mhi_ready_state_transition(mhi_cntrl); > + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL > + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) { > + write_lock_irq(&mhi_cntrl->pm_lock); > + cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_POR); > + write_unlock_irq(&mhi_cntrl->pm_lock); > + mhi_queue_state_transition(mhi_cntrl, DEV_ST_TRANSITION_PBL); > + } else { > + mhi_ready_state_transition(mhi_cntrl); > + } > } else { > /* Move to disable state */ > write_lock_irq(&mhi_cntrl->pm_lock); > @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct *work) > case DEV_ST_TRANSITION_MISSION_MODE: > mhi_pm_mission_mode_transition(mhi_cntrl); > break; > + case DEV_ST_TRANSITION_FP: > + write_lock_irq(&mhi_cntrl->pm_lock); > + mhi_cntrl->ee = MHI_EE_FP; > + write_unlock_irq(&mhi_cntrl->pm_lock); > + mhi_create_devices(mhi_cntrl); > + break; > case DEV_ST_TRANSITION_READY: > mhi_ready_state_transition(mhi_cntrl); > break; > diff --git a/include/linux/mhi.h b/include/linux/mhi.h > index 6e1122c..4620af8 100644 > --- a/include/linux/mhi.h > +++ b/include/linux/mhi.h > @@ -120,6 +120,7 @@ struct mhi_link_info { > * @MHI_EE_WFW: WLAN firmware mode > * @MHI_EE_PTHRU: Passthrough > * @MHI_EE_EDL: Embedded downloader > + * @MHI_EE_FP, Flash Programmer Environment > */ > enum mhi_ee_type { > MHI_EE_PBL, > @@ -129,7 +130,8 @@ enum mhi_ee_type { > MHI_EE_WFW, > MHI_EE_PTHRU, > MHI_EE_EDL, > - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, > + MHI_EE_FP, > + MHI_EE_MAX_SUPPORTED = MHI_EE_FP, > MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */ > MHI_EE_NOT_SUPPORTED, > MHI_EE_MAX, > This gets a NACK from me. I don't see the FP_EE that this patch introduces defined in the spec. Where did it come from?
Hi Jeff, On 10/27/20 8:11 AM, Jeffrey Hugo wrote: > On 10/27/2020 3:43 AM, carl.yin@quectel.com wrote: >> From: "carl.yin" <carl.yin@quectel.com> >> >> MHI wwan modems support download firmware to nand or emmc >> by firehose protocol, process as next: >> 1. wwan modem normal bootup and enter EE AMSS, create mhi DIAG chan >> device >> 2. send EDL cmd via DIAG chan, then modem enter EE EDL >> 3. boot.c download 'firehose/prog_firehose_sdx55.mbn' via BHI interface >> 4. modem enter EE FP, and create mhi EDL chan device >> 5. user space tool download FW to modem via EDL chan by firehose protocol >> >> Signed-off-by: carl.yin <carl.yin@quectel.com> >> --- >> drivers/bus/mhi/core/boot.c | 4 +++- >> drivers/bus/mhi/core/init.c | 2 ++ >> drivers/bus/mhi/core/internal.h | 1 + >> drivers/bus/mhi/core/main.c | 3 +++ >> drivers/bus/mhi/core/pm.c | 16 +++++++++++++++- >> include/linux/mhi.h | 4 +++- >> 6 files changed, 27 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c >> index 24422f5..ab39ad6 100644 >> --- a/drivers/bus/mhi/core/boot.c >> +++ b/drivers/bus/mhi/core/boot.c >> @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller >> *mhi_cntrl) >> return; >> } >> - if (mhi_cntrl->ee == MHI_EE_EDL) >> + if (mhi_cntrl->ee == MHI_EE_EDL) { >> + mhi_ready_state_transition(mhi_cntrl); >> return; >> + } >> write_lock_irq(&mhi_cntrl->pm_lock); >> mhi_cntrl->dev_state = MHI_STATE_RESET; >> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c >> index ac4aa5c..9c2c2f3 100644 >> --- a/drivers/bus/mhi/core/init.c >> +++ b/drivers/bus/mhi/core/init.c >> @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = { >> [MHI_EE_WFW] = "WFW", >> [MHI_EE_PTHRU] = "PASS THRU", >> [MHI_EE_EDL] = "EDL", >> + [MHI_EE_FP] = "FP", >> [MHI_EE_DISABLE_TRANSITION] = "DISABLE", >> [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED", >> }; >> @@ -35,6 +36,7 @@ const char * const >> dev_state_tran_str[DEV_ST_TRANSITION_MAX] = { >> [DEV_ST_TRANSITION_READY] = "READY", >> [DEV_ST_TRANSITION_SBL] = "SBL", >> [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE", >> + [DEV_ST_TRANSITION_FP] = "FP", >> [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR", >> [DEV_ST_TRANSITION_DISABLE] = "DISABLE", >> }; >> diff --git a/drivers/bus/mhi/core/internal.h >> b/drivers/bus/mhi/core/internal.h >> index 4abf0cf..6ae897a 100644 >> --- a/drivers/bus/mhi/core/internal.h >> +++ b/drivers/bus/mhi/core/internal.h >> @@ -386,6 +386,7 @@ enum dev_st_transition { >> DEV_ST_TRANSITION_READY, >> DEV_ST_TRANSITION_SBL, >> DEV_ST_TRANSITION_MISSION_MODE, >> + DEV_ST_TRANSITION_FP, >> DEV_ST_TRANSITION_SYS_ERR, >> DEV_ST_TRANSITION_DISABLE, >> DEV_ST_TRANSITION_MAX, >> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c >> index 3950792..e307b58 100644 >> --- a/drivers/bus/mhi/core/main.c >> +++ b/drivers/bus/mhi/core/main.c >> @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller >> *mhi_cntrl, >> case MHI_EE_SBL: >> st = DEV_ST_TRANSITION_SBL; >> break; >> + case MHI_EE_FP: >> + st = DEV_ST_TRANSITION_FP; >> + break; >> case MHI_EE_WFW: >> case MHI_EE_AMSS: >> st = DEV_ST_TRANSITION_MISSION_MODE; >> diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c >> index 3de7b16..3c95a5d 100644 >> --- a/drivers/bus/mhi/core/pm.c >> +++ b/drivers/bus/mhi/core/pm.c >> @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct >> mhi_controller *mhi_cntrl, >> } >> if (cur_state == MHI_PM_SYS_ERR_PROCESS) { >> - mhi_ready_state_transition(mhi_cntrl); >> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL >> + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) { >> + write_lock_irq(&mhi_cntrl->pm_lock); >> + cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_POR); >> + write_unlock_irq(&mhi_cntrl->pm_lock); >> + mhi_queue_state_transition(mhi_cntrl, >> DEV_ST_TRANSITION_PBL); >> + } else { >> + mhi_ready_state_transition(mhi_cntrl); >> + } >> } else { >> /* Move to disable state */ >> write_lock_irq(&mhi_cntrl->pm_lock); >> @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct *work) >> case DEV_ST_TRANSITION_MISSION_MODE: >> mhi_pm_mission_mode_transition(mhi_cntrl); >> break; >> + case DEV_ST_TRANSITION_FP: >> + write_lock_irq(&mhi_cntrl->pm_lock); >> + mhi_cntrl->ee = MHI_EE_FP; >> + write_unlock_irq(&mhi_cntrl->pm_lock); >> + mhi_create_devices(mhi_cntrl); >> + break; >> case DEV_ST_TRANSITION_READY: >> mhi_ready_state_transition(mhi_cntrl); >> break; >> diff --git a/include/linux/mhi.h b/include/linux/mhi.h >> index 6e1122c..4620af8 100644 >> --- a/include/linux/mhi.h >> +++ b/include/linux/mhi.h >> @@ -120,6 +120,7 @@ struct mhi_link_info { >> * @MHI_EE_WFW: WLAN firmware mode >> * @MHI_EE_PTHRU: Passthrough >> * @MHI_EE_EDL: Embedded downloader >> + * @MHI_EE_FP, Flash Programmer Environment >> */ >> enum mhi_ee_type { >> MHI_EE_PBL, >> @@ -129,7 +130,8 @@ enum mhi_ee_type { >> MHI_EE_WFW, >> MHI_EE_PTHRU, >> MHI_EE_EDL, >> - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, >> + MHI_EE_FP, >> + MHI_EE_MAX_SUPPORTED = MHI_EE_FP, >> MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */ >> MHI_EE_NOT_SUPPORTED, >> MHI_EE_MAX, >> > > This gets a NACK from me. I don't see the FP_EE that this patch > introduces defined in the spec. Where did it come from? > There is indeed a FP EE, BHI spec will be updated with this EE next month. Basically, once device goes to EDL, flash programmer image is downloaded using BHI protocol (same as we download SBL image using BHI from PBL in current use case). Once it is downloaded intvec sends EE change event for FP. Also event is generated for the same which is used to create EDL channels (34, 35) which is used by flash programmer to flash image for AMSS. >> 2. send EDL cmd via DIAG chan, then modem enter EE EDL #2 needs to be done in cleaner way. From AMSS when diag cmd is sent to switch to EDL, device would send SYS_ERR which we can use to do a call back to mhi controller to perform power down and power up. Instead of moving pm state to POR from disable transition :- @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct >> mhi_controller *mhi_cntrl, >> } >> if (cur_state == MHI_PM_SYS_ERR_PROCESS) { >> - mhi_ready_state_transition(mhi_cntrl); >> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL >> + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) { >> + write_lock_irq(&mhi_cntrl->pm_lock); >> + cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_POR); >> + write_unlock_irq(&mhi_cntrl->pm_lock); >> + mhi_queue_state_transition(mhi_cntrl, >> DEV_ST_TRANSITION_PBL); >> + } else { >> + mhi_ready_state_transition(mhi_cntrl); >> + } Thanks, Hemant
Hi Hemant and Jeffery: On Wednesday, October 28, 2020 7:02 AM, hemantk wrote: > Hi Jeff, > > On 10/27/20 8:11 AM, Jeffrey Hugo wrote: > > On 10/27/2020 3:43 AM, carl.yin@quectel.com wrote: > >> From: "carl.yin" <carl.yin@quectel.com> > >> > >> MHI wwan modems support download firmware to nand or emmc by firehose > >> protocol, process as next: > >> 1. wwan modem normal bootup and enter EE AMSS, create mhi DIAG chan > >> device 2. send EDL cmd via DIAG chan, then modem enter EE EDL 3. > >> boot.c download 'firehose/prog_firehose_sdx55.mbn' via BHI interface > >> 4. modem enter EE FP, and create mhi EDL chan device 5. user space > >> tool download FW to modem via EDL chan by firehose protocol > >> > >> Signed-off-by: carl.yin <carl.yin@quectel.com> > >> --- > >> drivers/bus/mhi/core/boot.c | 4 +++- > >> drivers/bus/mhi/core/init.c | 2 ++ > >> drivers/bus/mhi/core/internal.h | 1 + > >> drivers/bus/mhi/core/main.c | 3 +++ > >> drivers/bus/mhi/core/pm.c | 16 +++++++++++++++- > >> include/linux/mhi.h | 4 +++- > >> 6 files changed, 27 insertions(+), 3 deletions(-) > >> > >> diff --git a/drivers/bus/mhi/core/boot.c > >> b/drivers/bus/mhi/core/boot.c index 24422f5..ab39ad6 100644 > >> --- a/drivers/bus/mhi/core/boot.c > >> +++ b/drivers/bus/mhi/core/boot.c > >> @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller > >> *mhi_cntrl) > >> return; > >> } > >> - if (mhi_cntrl->ee == MHI_EE_EDL) > >> + if (mhi_cntrl->ee == MHI_EE_EDL) { > >> + mhi_ready_state_transition(mhi_cntrl); > >> return; > >> + } > >> write_lock_irq(&mhi_cntrl->pm_lock); > >> mhi_cntrl->dev_state = MHI_STATE_RESET; diff --git > >> a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c index > >> ac4aa5c..9c2c2f3 100644 > >> --- a/drivers/bus/mhi/core/init.c > >> +++ b/drivers/bus/mhi/core/init.c > >> @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = { > >> [MHI_EE_WFW] = "WFW", > >> [MHI_EE_PTHRU] = "PASS THRU", > >> [MHI_EE_EDL] = "EDL", > >> + [MHI_EE_FP] = "FP", > >> [MHI_EE_DISABLE_TRANSITION] = "DISABLE", > >> [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED", > >> }; > >> @@ -35,6 +36,7 @@ const char * const > >> dev_state_tran_str[DEV_ST_TRANSITION_MAX] = { > >> [DEV_ST_TRANSITION_READY] = "READY", > >> [DEV_ST_TRANSITION_SBL] = "SBL", > >> [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE", > >> + [DEV_ST_TRANSITION_FP] = "FP", > >> [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR", > >> [DEV_ST_TRANSITION_DISABLE] = "DISABLE", > >> }; > >> diff --git a/drivers/bus/mhi/core/internal.h > >> b/drivers/bus/mhi/core/internal.h index 4abf0cf..6ae897a 100644 > >> --- a/drivers/bus/mhi/core/internal.h > >> +++ b/drivers/bus/mhi/core/internal.h > >> @@ -386,6 +386,7 @@ enum dev_st_transition { > >> DEV_ST_TRANSITION_READY, > >> DEV_ST_TRANSITION_SBL, > >> DEV_ST_TRANSITION_MISSION_MODE, > >> + DEV_ST_TRANSITION_FP, > >> DEV_ST_TRANSITION_SYS_ERR, > >> DEV_ST_TRANSITION_DISABLE, > >> DEV_ST_TRANSITION_MAX, > >> diff --git a/drivers/bus/mhi/core/main.c > >> b/drivers/bus/mhi/core/main.c index 3950792..e307b58 100644 > >> --- a/drivers/bus/mhi/core/main.c > >> +++ b/drivers/bus/mhi/core/main.c > >> @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct > >> mhi_controller *mhi_cntrl, > >> case MHI_EE_SBL: > >> st = DEV_ST_TRANSITION_SBL; > >> break; > >> + case MHI_EE_FP: > >> + st = DEV_ST_TRANSITION_FP; > >> + break; > >> case MHI_EE_WFW: > >> case MHI_EE_AMSS: > >> st = DEV_ST_TRANSITION_MISSION_MODE; diff > --git > >> a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c index > >> 3de7b16..3c95a5d 100644 > >> --- a/drivers/bus/mhi/core/pm.c > >> +++ b/drivers/bus/mhi/core/pm.c > >> @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct > >> mhi_controller *mhi_cntrl, > >> } > >> if (cur_state == MHI_PM_SYS_ERR_PROCESS) { > >> - mhi_ready_state_transition(mhi_cntrl); > >> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL > >> + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) { > >> + write_lock_irq(&mhi_cntrl->pm_lock); > >> + cur_state = mhi_tryset_pm_state(mhi_cntrl, > MHI_PM_POR); > >> + write_unlock_irq(&mhi_cntrl->pm_lock); > >> + mhi_queue_state_transition(mhi_cntrl, > >> DEV_ST_TRANSITION_PBL); > >> + } else { > >> + mhi_ready_state_transition(mhi_cntrl); > >> + } > >> } else { > >> /* Move to disable state */ > >> write_lock_irq(&mhi_cntrl->pm_lock); > >> @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct *work) > >> case DEV_ST_TRANSITION_MISSION_MODE: > >> mhi_pm_mission_mode_transition(mhi_cntrl); > >> break; > >> + case DEV_ST_TRANSITION_FP: > >> + write_lock_irq(&mhi_cntrl->pm_lock); > >> + mhi_cntrl->ee = MHI_EE_FP; > >> + write_unlock_irq(&mhi_cntrl->pm_lock); > >> + mhi_create_devices(mhi_cntrl); > >> + break; > >> case DEV_ST_TRANSITION_READY: > >> mhi_ready_state_transition(mhi_cntrl); > >> break; > >> diff --git a/include/linux/mhi.h b/include/linux/mhi.h index > >> 6e1122c..4620af8 100644 > >> --- a/include/linux/mhi.h > >> +++ b/include/linux/mhi.h > >> @@ -120,6 +120,7 @@ struct mhi_link_info { > >> * @MHI_EE_WFW: WLAN firmware mode > >> * @MHI_EE_PTHRU: Passthrough > >> * @MHI_EE_EDL: Embedded downloader > >> + * @MHI_EE_FP, Flash Programmer Environment > >> */ > >> enum mhi_ee_type { > >> MHI_EE_PBL, > >> @@ -129,7 +130,8 @@ enum mhi_ee_type { > >> MHI_EE_WFW, > >> MHI_EE_PTHRU, > >> MHI_EE_EDL, > >> - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, > >> + MHI_EE_FP, > >> + MHI_EE_MAX_SUPPORTED = MHI_EE_FP, > >> MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec > >> */ > >> MHI_EE_NOT_SUPPORTED, > >> MHI_EE_MAX, > >> > > > > This gets a NACK from me. I don't see the FP_EE that this patch > > introduces defined in the spec. Where did it come from? > > > There is indeed a FP EE, BHI spec will be updated with this EE next month. > > Basically, once device goes to EDL, flash programmer image is downloaded using > BHI protocol (same as we download SBL image using BHI from PBL in current use > case). Once it is downloaded intvec sends EE change event for FP. Also event is > generated for the same which is used to create EDL channels (34, 35) which is > used by flash programmer to flash image for AMSS. > [carl.yin] I am refer to QUALLCOMM's windows MHI driver. And the patch work well on my SDX24&SDX55 modems. I can use it to upgrade my modems. > >> 2. send EDL cmd via DIAG chan, then modem enter EE EDL > #2 needs to be done in cleaner way. From AMSS when diag cmd is sent to switch > to EDL, device would send SYS_ERR which we can use to do a call back to mhi > controller to perform power down and power up. Instead of moving pm state to > POR from disable transition :- [carl.yin] when the MHI EE switch, from AMSS to SBL, or from AMSS to EDL. I not sure if we will do mhi controller power down and power up. But from my test result, it works well now. Next is the mhi core log. [66519.934318] mhi 0000:03:00.0: Chan: 4 successfully moved to start state [66519.934324] mhi 0000:03:00.0: Preparing channel: 5 [66519.942675] mhi 0000:03:00.0: Chan: 5 successfully moved to start state [66521.817279] mhi 0000:03:00.0: local ee:EDL device ee:AMSS dev_state:SYS_ERR [66521.817284] mhi 0000:03:00.0: System error detected [66521.817304] mhi 0000:03:00.0: Handling state transition: SYS_ERR [66521.817308] mhi 0000:03:00.0: Transitioning from PM state: SYS_ERR Detect to: SYS_ERR Process [66521.817311] mhi 0000:03:00.0: Triggering MHI Reset in device [66521.817451] mhi 0000:03:00.0: local ee:EDL device ee:DISABLE dev_state:RESET [66521.817469] mhi 0000:03:00.0: Waiting for all pending event ring processing to complete [66521.817472] mhi 0000:03:00.0: Waiting for all pending threads to complete [66521.817474] mhi 0000:03:00.0: Reset all active channels and remove MHI devices [66521.817777] mhi 0000:03:00.0: destroy device for chan:DIAG [66521.817809] mhi 0000:03:00.0: Marking all events for chan: 5 as stale [66521.817812] mhi 0000:03:00.0: Finished marking events as stale events [66521.817857] mhi 0000:03:00.0: Marking all events for chan: 4 as stale [66521.817860] mhi 0000:03:00.0: Finished marking events as stale events [66521.818036] mhi 0000:03:00.0: destroy device for chan:MBIM [66521.818062] mhi 0000:03:00.0: Marking all events for chan: 13 as stale [66521.818064] mhi 0000:03:00.0: Finished marking events as stale events [66521.818066] mhi 0000:03:00.0: Marking all events for chan: 12 as stale [66521.818069] mhi 0000:03:00.0: Finished marking events as stale events [66521.818471] mhi 0000:03:00.0: destroy device for chan:IP_HW0_MBIM [66521.818497] mhi 0000:03:00.0: Marking all events for chan: 101 as stale [66521.818500] mhi 0000:03:00.0: Finished marking events as stale events [66521.818503] mhi 0000:03:00.0: Marking all events for chan: 100 as stale [66521.818505] mhi 0000:03:00.0: Finished marking events as stale events [66521.855633] mhi 0000:03:00.0: Entered: unprepare channel:101 [66521.855635] mhi 0000:03:00.0: Entered: unprepare channel:100 [66521.855669] mhi 0000:03:00.0: Resetting EV CTXT and CMD CTXT [66521.855678] mhi 0000:03:00.0: Exiting with PM state: POR, MHI state: RESET [66521.855679] mhi 0000:03:00.0: Handling state transition: PBL [66521.855848] mhi 0000:03:00.0: Starting SBL download via BHI. Session ID:703272956 [66521.878480] mhi 0000:03:00.0: local ee:EDL device ee:EDL dev_state:RESET [66522.902542] mhi 0000:03:00.0: local ee:FP device ee:EDL dev_state:READY [66522.902563] mhi 0000:03:00.0: Device in READY State [66522.902566] mhi 0000:03:00.0: Initializing MHI registers [66522.906563] mhi 0000:03:00.0: State change event to state: M0 [66522.907481] mhi 0000:03:00.0: Received EE event: FP [66522.907530] mhi 0000:03:00.0: Handling state transition: FP [66523.818829] mhi 0000:03:00.0: Preparing channel: 34 [66523.822219] mhi 0000:03:00.0: Chan: 34 successfully moved to start state [66523.822225] mhi 0000:03:00.0: Preparing channel: 35 [66523.825642] mhi 0000:03:00.0: Chan: 35 successfully moved to start state > > @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct >> > mhi_controller *mhi_cntrl, > >> } > >> if (cur_state == MHI_PM_SYS_ERR_PROCESS) { > >> - mhi_ready_state_transition(mhi_cntrl); > >> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL > >> + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) { > >> + write_lock_irq(&mhi_cntrl->pm_lock); > >> + cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_POR); > >> + write_unlock_irq(&mhi_cntrl->pm_lock); > >> + mhi_queue_state_transition(mhi_cntrl, > >> DEV_ST_TRANSITION_PBL); > >> + } else { > >> + mhi_ready_state_transition(mhi_cntrl); > >> + } > > Thanks, > Hemant > > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a > Linux Foundation Collaborative Project
On 10/27/2020 5:01 PM, Hemant Kumar wrote: > Hi Jeff, > > On 10/27/20 8:11 AM, Jeffrey Hugo wrote: >> On 10/27/2020 3:43 AM, carl.yin@quectel.com wrote: >>> From: "carl.yin" <carl.yin@quectel.com> >>> >>> MHI wwan modems support download firmware to nand or emmc >>> by firehose protocol, process as next: >>> 1. wwan modem normal bootup and enter EE AMSS, create mhi DIAG chan >>> device >>> 2. send EDL cmd via DIAG chan, then modem enter EE EDL >>> 3. boot.c download 'firehose/prog_firehose_sdx55.mbn' via BHI interface >>> 4. modem enter EE FP, and create mhi EDL chan device >>> 5. user space tool download FW to modem via EDL chan by firehose >>> protocol >>> >>> Signed-off-by: carl.yin <carl.yin@quectel.com> >>> --- >>> drivers/bus/mhi/core/boot.c | 4 +++- >>> drivers/bus/mhi/core/init.c | 2 ++ >>> drivers/bus/mhi/core/internal.h | 1 + >>> drivers/bus/mhi/core/main.c | 3 +++ >>> drivers/bus/mhi/core/pm.c | 16 +++++++++++++++- >>> include/linux/mhi.h | 4 +++- >>> 6 files changed, 27 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c >>> index 24422f5..ab39ad6 100644 >>> --- a/drivers/bus/mhi/core/boot.c >>> +++ b/drivers/bus/mhi/core/boot.c >>> @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller >>> *mhi_cntrl) >>> return; >>> } >>> - if (mhi_cntrl->ee == MHI_EE_EDL) >>> + if (mhi_cntrl->ee == MHI_EE_EDL) { >>> + mhi_ready_state_transition(mhi_cntrl); >>> return; >>> + } >>> write_lock_irq(&mhi_cntrl->pm_lock); >>> mhi_cntrl->dev_state = MHI_STATE_RESET; >>> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c >>> index ac4aa5c..9c2c2f3 100644 >>> --- a/drivers/bus/mhi/core/init.c >>> +++ b/drivers/bus/mhi/core/init.c >>> @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = { >>> [MHI_EE_WFW] = "WFW", >>> [MHI_EE_PTHRU] = "PASS THRU", >>> [MHI_EE_EDL] = "EDL", >>> + [MHI_EE_FP] = "FP", >>> [MHI_EE_DISABLE_TRANSITION] = "DISABLE", >>> [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED", >>> }; >>> @@ -35,6 +36,7 @@ const char * const >>> dev_state_tran_str[DEV_ST_TRANSITION_MAX] = { >>> [DEV_ST_TRANSITION_READY] = "READY", >>> [DEV_ST_TRANSITION_SBL] = "SBL", >>> [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE", >>> + [DEV_ST_TRANSITION_FP] = "FP", >>> [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR", >>> [DEV_ST_TRANSITION_DISABLE] = "DISABLE", >>> }; >>> diff --git a/drivers/bus/mhi/core/internal.h >>> b/drivers/bus/mhi/core/internal.h >>> index 4abf0cf..6ae897a 100644 >>> --- a/drivers/bus/mhi/core/internal.h >>> +++ b/drivers/bus/mhi/core/internal.h >>> @@ -386,6 +386,7 @@ enum dev_st_transition { >>> DEV_ST_TRANSITION_READY, >>> DEV_ST_TRANSITION_SBL, >>> DEV_ST_TRANSITION_MISSION_MODE, >>> + DEV_ST_TRANSITION_FP, >>> DEV_ST_TRANSITION_SYS_ERR, >>> DEV_ST_TRANSITION_DISABLE, >>> DEV_ST_TRANSITION_MAX, >>> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c >>> index 3950792..e307b58 100644 >>> --- a/drivers/bus/mhi/core/main.c >>> +++ b/drivers/bus/mhi/core/main.c >>> @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct >>> mhi_controller *mhi_cntrl, >>> case MHI_EE_SBL: >>> st = DEV_ST_TRANSITION_SBL; >>> break; >>> + case MHI_EE_FP: >>> + st = DEV_ST_TRANSITION_FP; >>> + break; >>> case MHI_EE_WFW: >>> case MHI_EE_AMSS: >>> st = DEV_ST_TRANSITION_MISSION_MODE; >>> diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c >>> index 3de7b16..3c95a5d 100644 >>> --- a/drivers/bus/mhi/core/pm.c >>> +++ b/drivers/bus/mhi/core/pm.c >>> @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct >>> mhi_controller *mhi_cntrl, >>> } >>> if (cur_state == MHI_PM_SYS_ERR_PROCESS) { >>> - mhi_ready_state_transition(mhi_cntrl); >>> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL >>> + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) { >>> + write_lock_irq(&mhi_cntrl->pm_lock); >>> + cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_POR); >>> + write_unlock_irq(&mhi_cntrl->pm_lock); >>> + mhi_queue_state_transition(mhi_cntrl, >>> DEV_ST_TRANSITION_PBL); >>> + } else { >>> + mhi_ready_state_transition(mhi_cntrl); >>> + } >>> } else { >>> /* Move to disable state */ >>> write_lock_irq(&mhi_cntrl->pm_lock); >>> @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct *work) >>> case DEV_ST_TRANSITION_MISSION_MODE: >>> mhi_pm_mission_mode_transition(mhi_cntrl); >>> break; >>> + case DEV_ST_TRANSITION_FP: >>> + write_lock_irq(&mhi_cntrl->pm_lock); >>> + mhi_cntrl->ee = MHI_EE_FP; >>> + write_unlock_irq(&mhi_cntrl->pm_lock); >>> + mhi_create_devices(mhi_cntrl); >>> + break; >>> case DEV_ST_TRANSITION_READY: >>> mhi_ready_state_transition(mhi_cntrl); >>> break; >>> diff --git a/include/linux/mhi.h b/include/linux/mhi.h >>> index 6e1122c..4620af8 100644 >>> --- a/include/linux/mhi.h >>> +++ b/include/linux/mhi.h >>> @@ -120,6 +120,7 @@ struct mhi_link_info { >>> * @MHI_EE_WFW: WLAN firmware mode >>> * @MHI_EE_PTHRU: Passthrough >>> * @MHI_EE_EDL: Embedded downloader >>> + * @MHI_EE_FP, Flash Programmer Environment >>> */ >>> enum mhi_ee_type { >>> MHI_EE_PBL, >>> @@ -129,7 +130,8 @@ enum mhi_ee_type { >>> MHI_EE_WFW, >>> MHI_EE_PTHRU, >>> MHI_EE_EDL, >>> - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, >>> + MHI_EE_FP, >>> + MHI_EE_MAX_SUPPORTED = MHI_EE_FP, >>> MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */ >>> MHI_EE_NOT_SUPPORTED, >>> MHI_EE_MAX, >>> >> >> This gets a NACK from me. I don't see the FP_EE that this patch >> introduces defined in the spec. Where did it come from? >> > There is indeed a FP EE, BHI spec will be updated with this EE next month. <sigh> Alright I withdraw my nack based on your word. > Basically, once device goes to EDL, flash programmer image is downloaded > using BHI protocol (same as we download SBL image using BHI from PBL in > current use case). Once it is downloaded intvec sends EE change event > for FP. Also event is generated for the same which is used to create > EDL channels (34, 35) which is used by flash programmer to flash image > for AMSS. Intresting. Seems simple enough. > > >> 2. send EDL cmd via DIAG chan, then modem enter EE EDL > #2 needs to be done in cleaner way. From AMSS when diag cmd is sent to > switch to EDL, device would send SYS_ERR which we can use to do a call > back to mhi controller to perform power down and power up. Instead of > moving pm state to POR from disable transition :- This seems sane to me. I'll review v2 when it gets posted. > > @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct > >> mhi_controller *mhi_cntrl, > >> } > >> if (cur_state == MHI_PM_SYS_ERR_PROCESS) { > >> - mhi_ready_state_transition(mhi_cntrl); > >> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL > >> + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) { > >> + write_lock_irq(&mhi_cntrl->pm_lock); > >> + cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_POR); > >> + write_unlock_irq(&mhi_cntrl->pm_lock); > >> + mhi_queue_state_transition(mhi_cntrl, > >> DEV_ST_TRANSITION_PBL); > >> + } else { > >> + mhi_ready_state_transition(mhi_cntrl); > >> + } > > Thanks, > Hemant >
On 10/27/2020 7:39 PM, Carl Yin(殷张成) wrote: > Hi Hemant and Jeffery: > > On Wednesday, October 28, 2020 7:02 AM, hemantk wrote: >> Hi Jeff, >> >> On 10/27/20 8:11 AM, Jeffrey Hugo wrote: >>> On 10/27/2020 3:43 AM, carl.yin@quectel.com wrote: >>>> From: "carl.yin" <carl.yin@quectel.com> >>>> >>>> MHI wwan modems support download firmware to nand or emmc by firehose >>>> protocol, process as next: >>>> 1. wwan modem normal bootup and enter EE AMSS, create mhi DIAG chan >>>> device 2. send EDL cmd via DIAG chan, then modem enter EE EDL 3. >>>> boot.c download 'firehose/prog_firehose_sdx55.mbn' via BHI interface >>>> 4. modem enter EE FP, and create mhi EDL chan device 5. user space >>>> tool download FW to modem via EDL chan by firehose protocol >>>> >>>> Signed-off-by: carl.yin <carl.yin@quectel.com> >>>> --- >>>> drivers/bus/mhi/core/boot.c | 4 +++- >>>> drivers/bus/mhi/core/init.c | 2 ++ >>>> drivers/bus/mhi/core/internal.h | 1 + >>>> drivers/bus/mhi/core/main.c | 3 +++ >>>> drivers/bus/mhi/core/pm.c | 16 +++++++++++++++- >>>> include/linux/mhi.h | 4 +++- >>>> 6 files changed, 27 insertions(+), 3 deletions(-) >>>> >>>> diff --git a/drivers/bus/mhi/core/boot.c >>>> b/drivers/bus/mhi/core/boot.c index 24422f5..ab39ad6 100644 >>>> --- a/drivers/bus/mhi/core/boot.c >>>> +++ b/drivers/bus/mhi/core/boot.c >>>> @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller >>>> *mhi_cntrl) >>>> return; >>>> } >>>> - if (mhi_cntrl->ee == MHI_EE_EDL) >>>> + if (mhi_cntrl->ee == MHI_EE_EDL) { >>>> + mhi_ready_state_transition(mhi_cntrl); >>>> return; >>>> + } >>>> write_lock_irq(&mhi_cntrl->pm_lock); >>>> mhi_cntrl->dev_state = MHI_STATE_RESET; diff --git >>>> a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c index >>>> ac4aa5c..9c2c2f3 100644 >>>> --- a/drivers/bus/mhi/core/init.c >>>> +++ b/drivers/bus/mhi/core/init.c >>>> @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = { >>>> [MHI_EE_WFW] = "WFW", >>>> [MHI_EE_PTHRU] = "PASS THRU", >>>> [MHI_EE_EDL] = "EDL", >>>> + [MHI_EE_FP] = "FP", >>>> [MHI_EE_DISABLE_TRANSITION] = "DISABLE", >>>> [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED", >>>> }; >>>> @@ -35,6 +36,7 @@ const char * const >>>> dev_state_tran_str[DEV_ST_TRANSITION_MAX] = { >>>> [DEV_ST_TRANSITION_READY] = "READY", >>>> [DEV_ST_TRANSITION_SBL] = "SBL", >>>> [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE", >>>> + [DEV_ST_TRANSITION_FP] = "FP", >>>> [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR", >>>> [DEV_ST_TRANSITION_DISABLE] = "DISABLE", >>>> }; >>>> diff --git a/drivers/bus/mhi/core/internal.h >>>> b/drivers/bus/mhi/core/internal.h index 4abf0cf..6ae897a 100644 >>>> --- a/drivers/bus/mhi/core/internal.h >>>> +++ b/drivers/bus/mhi/core/internal.h >>>> @@ -386,6 +386,7 @@ enum dev_st_transition { >>>> DEV_ST_TRANSITION_READY, >>>> DEV_ST_TRANSITION_SBL, >>>> DEV_ST_TRANSITION_MISSION_MODE, >>>> + DEV_ST_TRANSITION_FP, >>>> DEV_ST_TRANSITION_SYS_ERR, >>>> DEV_ST_TRANSITION_DISABLE, >>>> DEV_ST_TRANSITION_MAX, >>>> diff --git a/drivers/bus/mhi/core/main.c >>>> b/drivers/bus/mhi/core/main.c index 3950792..e307b58 100644 >>>> --- a/drivers/bus/mhi/core/main.c >>>> +++ b/drivers/bus/mhi/core/main.c >>>> @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct >>>> mhi_controller *mhi_cntrl, >>>> case MHI_EE_SBL: >>>> st = DEV_ST_TRANSITION_SBL; >>>> break; >>>> + case MHI_EE_FP: >>>> + st = DEV_ST_TRANSITION_FP; >>>> + break; >>>> case MHI_EE_WFW: >>>> case MHI_EE_AMSS: >>>> st = DEV_ST_TRANSITION_MISSION_MODE; diff >> --git >>>> a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c index >>>> 3de7b16..3c95a5d 100644 >>>> --- a/drivers/bus/mhi/core/pm.c >>>> +++ b/drivers/bus/mhi/core/pm.c >>>> @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct >>>> mhi_controller *mhi_cntrl, >>>> } >>>> if (cur_state == MHI_PM_SYS_ERR_PROCESS) { >>>> - mhi_ready_state_transition(mhi_cntrl); >>>> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL >>>> + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) { >>>> + write_lock_irq(&mhi_cntrl->pm_lock); >>>> + cur_state = mhi_tryset_pm_state(mhi_cntrl, >> MHI_PM_POR); >>>> + write_unlock_irq(&mhi_cntrl->pm_lock); >>>> + mhi_queue_state_transition(mhi_cntrl, >>>> DEV_ST_TRANSITION_PBL); >>>> + } else { >>>> + mhi_ready_state_transition(mhi_cntrl); >>>> + } >>>> } else { >>>> /* Move to disable state */ >>>> write_lock_irq(&mhi_cntrl->pm_lock); >>>> @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct *work) >>>> case DEV_ST_TRANSITION_MISSION_MODE: >>>> mhi_pm_mission_mode_transition(mhi_cntrl); >>>> break; >>>> + case DEV_ST_TRANSITION_FP: >>>> + write_lock_irq(&mhi_cntrl->pm_lock); >>>> + mhi_cntrl->ee = MHI_EE_FP; >>>> + write_unlock_irq(&mhi_cntrl->pm_lock); >>>> + mhi_create_devices(mhi_cntrl); >>>> + break; >>>> case DEV_ST_TRANSITION_READY: >>>> mhi_ready_state_transition(mhi_cntrl); >>>> break; >>>> diff --git a/include/linux/mhi.h b/include/linux/mhi.h index >>>> 6e1122c..4620af8 100644 >>>> --- a/include/linux/mhi.h >>>> +++ b/include/linux/mhi.h >>>> @@ -120,6 +120,7 @@ struct mhi_link_info { >>>> * @MHI_EE_WFW: WLAN firmware mode >>>> * @MHI_EE_PTHRU: Passthrough >>>> * @MHI_EE_EDL: Embedded downloader >>>> + * @MHI_EE_FP, Flash Programmer Environment >>>> */ >>>> enum mhi_ee_type { >>>> MHI_EE_PBL, >>>> @@ -129,7 +130,8 @@ enum mhi_ee_type { >>>> MHI_EE_WFW, >>>> MHI_EE_PTHRU, >>>> MHI_EE_EDL, >>>> - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, >>>> + MHI_EE_FP, >>>> + MHI_EE_MAX_SUPPORTED = MHI_EE_FP, >>>> MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec >>>> */ >>>> MHI_EE_NOT_SUPPORTED, >>>> MHI_EE_MAX, >>>> >>> >>> This gets a NACK from me. I don't see the FP_EE that this patch >>> introduces defined in the spec. Where did it come from? >>> >> There is indeed a FP EE, BHI spec will be updated with this EE next month. >> >> Basically, once device goes to EDL, flash programmer image is downloaded using >> BHI protocol (same as we download SBL image using BHI from PBL in current use >> case). Once it is downloaded intvec sends EE change event for FP. Also event is >> generated for the same which is used to create EDL channels (34, 35) which is >> used by flash programmer to flash image for AMSS. >> > [carl.yin] I am refer to QUALLCOMM's windows MHI driver. > And the patch work well on my SDX24&SDX55 modems. > I can use it to upgrade my modems. Linaro has an opensource utility that implements firehose - https://github.com/andersson/qdl Did you test with that?
Hi Jeffery: On Wednesday, October 28, 2020 10:24 PM, jhugo wrote: > On 10/27/2020 7:39 PM, Carl Yin(殷张成) wrote: > > Hi Hemant and Jeffery: > > > > On Wednesday, October 28, 2020 7:02 AM, hemantk wrote: > >> Hi Jeff, > >> > >> On 10/27/20 8:11 AM, Jeffrey Hugo wrote: > >>> On 10/27/2020 3:43 AM, carl.yin@quectel.com wrote: > >>>> From: "carl.yin" <carl.yin@quectel.com> > >>>> > >>>> MHI wwan modems support download firmware to nand or emmc by > >>>> firehose protocol, process as next: > >>>> 1. wwan modem normal bootup and enter EE AMSS, create mhi DIAG chan > >>>> device 2. send EDL cmd via DIAG chan, then modem enter EE EDL 3. > >>>> boot.c download 'firehose/prog_firehose_sdx55.mbn' via BHI > >>>> interface 4. modem enter EE FP, and create mhi EDL chan device 5. > >>>> user space tool download FW to modem via EDL chan by firehose > >>>> protocol > >>>> > >>>> Signed-off-by: carl.yin <carl.yin@quectel.com> > >>>> --- > >>>> drivers/bus/mhi/core/boot.c | 4 +++- > >>>> drivers/bus/mhi/core/init.c | 2 ++ > >>>> drivers/bus/mhi/core/internal.h | 1 + > >>>> drivers/bus/mhi/core/main.c | 3 +++ > >>>> drivers/bus/mhi/core/pm.c | 16 +++++++++++++++- > >>>> include/linux/mhi.h | 4 +++- > >>>> 6 files changed, 27 insertions(+), 3 deletions(-) > >>>> > >>>> diff --git a/drivers/bus/mhi/core/boot.c > >>>> b/drivers/bus/mhi/core/boot.c index 24422f5..ab39ad6 100644 > >>>> --- a/drivers/bus/mhi/core/boot.c > >>>> +++ b/drivers/bus/mhi/core/boot.c > >>>> @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller > >>>> *mhi_cntrl) > >>>> return; > >>>> } > >>>> - if (mhi_cntrl->ee == MHI_EE_EDL) > >>>> + if (mhi_cntrl->ee == MHI_EE_EDL) { > >>>> + mhi_ready_state_transition(mhi_cntrl); > >>>> return; > >>>> + } > >>>> write_lock_irq(&mhi_cntrl->pm_lock); > >>>> mhi_cntrl->dev_state = MHI_STATE_RESET; diff --git > >>>> a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c index > >>>> ac4aa5c..9c2c2f3 100644 > >>>> --- a/drivers/bus/mhi/core/init.c > >>>> +++ b/drivers/bus/mhi/core/init.c > >>>> @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = { > >>>> [MHI_EE_WFW] = "WFW", > >>>> [MHI_EE_PTHRU] = "PASS THRU", > >>>> [MHI_EE_EDL] = "EDL", > >>>> + [MHI_EE_FP] = "FP", > >>>> [MHI_EE_DISABLE_TRANSITION] = "DISABLE", > >>>> [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED", > >>>> }; > >>>> @@ -35,6 +36,7 @@ const char * const > >>>> dev_state_tran_str[DEV_ST_TRANSITION_MAX] = { > >>>> [DEV_ST_TRANSITION_READY] = "READY", > >>>> [DEV_ST_TRANSITION_SBL] = "SBL", > >>>> [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE", > >>>> + [DEV_ST_TRANSITION_FP] = "FP", > >>>> [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR", > >>>> [DEV_ST_TRANSITION_DISABLE] = "DISABLE", > >>>> }; > >>>> diff --git a/drivers/bus/mhi/core/internal.h > >>>> b/drivers/bus/mhi/core/internal.h index 4abf0cf..6ae897a 100644 > >>>> --- a/drivers/bus/mhi/core/internal.h > >>>> +++ b/drivers/bus/mhi/core/internal.h > >>>> @@ -386,6 +386,7 @@ enum dev_st_transition { > >>>> DEV_ST_TRANSITION_READY, > >>>> DEV_ST_TRANSITION_SBL, > >>>> DEV_ST_TRANSITION_MISSION_MODE, > >>>> + DEV_ST_TRANSITION_FP, > >>>> DEV_ST_TRANSITION_SYS_ERR, > >>>> DEV_ST_TRANSITION_DISABLE, > >>>> DEV_ST_TRANSITION_MAX, > >>>> diff --git a/drivers/bus/mhi/core/main.c > >>>> b/drivers/bus/mhi/core/main.c index 3950792..e307b58 100644 > >>>> --- a/drivers/bus/mhi/core/main.c > >>>> +++ b/drivers/bus/mhi/core/main.c > >>>> @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct > >>>> mhi_controller *mhi_cntrl, > >>>> case MHI_EE_SBL: > >>>> st = DEV_ST_TRANSITION_SBL; > >>>> break; > >>>> + case MHI_EE_FP: > >>>> + st = DEV_ST_TRANSITION_FP; > >>>> + break; > >>>> case MHI_EE_WFW: > >>>> case MHI_EE_AMSS: > >>>> st = DEV_ST_TRANSITION_MISSION_MODE; > diff > >> --git > >>>> a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c index > >>>> 3de7b16..3c95a5d 100644 > >>>> --- a/drivers/bus/mhi/core/pm.c > >>>> +++ b/drivers/bus/mhi/core/pm.c > >>>> @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct > >>>> mhi_controller *mhi_cntrl, > >>>> } > >>>> if (cur_state == MHI_PM_SYS_ERR_PROCESS) { > >>>> - mhi_ready_state_transition(mhi_cntrl); > >>>> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL > >>>> + && mhi_get_mhi_state(mhi_cntrl) == > MHI_STATE_RESET) { > >>>> + write_lock_irq(&mhi_cntrl->pm_lock); > >>>> + cur_state = mhi_tryset_pm_state(mhi_cntrl, > >> MHI_PM_POR); > >>>> + write_unlock_irq(&mhi_cntrl->pm_lock); > >>>> + mhi_queue_state_transition(mhi_cntrl, > >>>> DEV_ST_TRANSITION_PBL); > >>>> + } else { > >>>> + mhi_ready_state_transition(mhi_cntrl); > >>>> + } > >>>> } else { > >>>> /* Move to disable state */ > >>>> write_lock_irq(&mhi_cntrl->pm_lock); > >>>> @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct > >>>> *work) > >>>> case DEV_ST_TRANSITION_MISSION_MODE: > >>>> mhi_pm_mission_mode_transition(mhi_cntrl); > >>>> break; > >>>> + case DEV_ST_TRANSITION_FP: > >>>> + write_lock_irq(&mhi_cntrl->pm_lock); > >>>> + mhi_cntrl->ee = MHI_EE_FP; > >>>> + write_unlock_irq(&mhi_cntrl->pm_lock); > >>>> + mhi_create_devices(mhi_cntrl); > >>>> + break; > >>>> case DEV_ST_TRANSITION_READY: > >>>> mhi_ready_state_transition(mhi_cntrl); > >>>> break; > >>>> diff --git a/include/linux/mhi.h b/include/linux/mhi.h index > >>>> 6e1122c..4620af8 100644 > >>>> --- a/include/linux/mhi.h > >>>> +++ b/include/linux/mhi.h > >>>> @@ -120,6 +120,7 @@ struct mhi_link_info { > >>>> * @MHI_EE_WFW: WLAN firmware mode > >>>> * @MHI_EE_PTHRU: Passthrough > >>>> * @MHI_EE_EDL: Embedded downloader > >>>> + * @MHI_EE_FP, Flash Programmer Environment > >>>> */ > >>>> enum mhi_ee_type { > >>>> MHI_EE_PBL, > >>>> @@ -129,7 +130,8 @@ enum mhi_ee_type { > >>>> MHI_EE_WFW, > >>>> MHI_EE_PTHRU, > >>>> MHI_EE_EDL, > >>>> - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, > >>>> + MHI_EE_FP, > >>>> + MHI_EE_MAX_SUPPORTED = MHI_EE_FP, > >>>> MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi > >>>> spec */ > >>>> MHI_EE_NOT_SUPPORTED, > >>>> MHI_EE_MAX, > >>>> > >>> > >>> This gets a NACK from me. I don't see the FP_EE that this patch > >>> introduces defined in the spec. Where did it come from? > >>> > >> There is indeed a FP EE, BHI spec will be updated with this EE next month. > >> > >> Basically, once device goes to EDL, flash programmer image is > >> downloaded using BHI protocol (same as we download SBL image using > >> BHI from PBL in current use case). Once it is downloaded intvec sends > >> EE change event for FP. Also event is generated for the same which is > >> used to create EDL channels (34, 35) which is used by flash programmer to > flash image for AMSS. > >> > > [carl.yin] I am refer to QUALLCOMM's windows MHI driver. > > And the patch work well on my SDX24&SDX55 modems. > > I can use it to upgrade my modems. > > Linaro has an opensource utility that implements firehose - > https://github.com/andersson/qdl > > Did you test with that? [carl.yin] I am test with https://github.com/carlyin/mhi_for_quectel_modem/blob/main/tools/firehose_protocol.c Firehose protocol is same for mhi and usb device, and different on download edl image. For usb device, use space tool download edl image by sahara protocol, For mhi device, mhi driver download edl image by BHI interface, For wwan device, it is better do it in user space. > > -- > Jeffrey Hugo > Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux > Foundation Collaborative Project.
On 10/28/2020 7:12 PM, Carl Yin(殷张成) wrote: > Hi Jeffery: > > On Wednesday, October 28, 2020 10:24 PM, jhugo wrote: >> On 10/27/2020 7:39 PM, Carl Yin(殷张成) wrote: >>> Hi Hemant and Jeffery: >>> >>> On Wednesday, October 28, 2020 7:02 AM, hemantk wrote: >>>> Hi Jeff, >>>> >>>> On 10/27/20 8:11 AM, Jeffrey Hugo wrote: >>>>> On 10/27/2020 3:43 AM, carl.yin@quectel.com wrote: >>>>>> From: "carl.yin" <carl.yin@quectel.com> >>>>>> >>>>>> MHI wwan modems support download firmware to nand or emmc by >>>>>> firehose protocol, process as next: >>>>>> 1. wwan modem normal bootup and enter EE AMSS, create mhi DIAG chan >>>>>> device 2. send EDL cmd via DIAG chan, then modem enter EE EDL 3. >>>>>> boot.c download 'firehose/prog_firehose_sdx55.mbn' via BHI >>>>>> interface 4. modem enter EE FP, and create mhi EDL chan device 5. >>>>>> user space tool download FW to modem via EDL chan by firehose >>>>>> protocol >>>>>> >>>>>> Signed-off-by: carl.yin <carl.yin@quectel.com> >>>>>> --- >>>>>> drivers/bus/mhi/core/boot.c | 4 +++- >>>>>> drivers/bus/mhi/core/init.c | 2 ++ >>>>>> drivers/bus/mhi/core/internal.h | 1 + >>>>>> drivers/bus/mhi/core/main.c | 3 +++ >>>>>> drivers/bus/mhi/core/pm.c | 16 +++++++++++++++- >>>>>> include/linux/mhi.h | 4 +++- >>>>>> 6 files changed, 27 insertions(+), 3 deletions(-) >>>>>> >>>>>> diff --git a/drivers/bus/mhi/core/boot.c >>>>>> b/drivers/bus/mhi/core/boot.c index 24422f5..ab39ad6 100644 >>>>>> --- a/drivers/bus/mhi/core/boot.c >>>>>> +++ b/drivers/bus/mhi/core/boot.c >>>>>> @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller >>>>>> *mhi_cntrl) >>>>>> return; >>>>>> } >>>>>> - if (mhi_cntrl->ee == MHI_EE_EDL) >>>>>> + if (mhi_cntrl->ee == MHI_EE_EDL) { >>>>>> + mhi_ready_state_transition(mhi_cntrl); >>>>>> return; >>>>>> + } >>>>>> write_lock_irq(&mhi_cntrl->pm_lock); >>>>>> mhi_cntrl->dev_state = MHI_STATE_RESET; diff --git >>>>>> a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c index >>>>>> ac4aa5c..9c2c2f3 100644 >>>>>> --- a/drivers/bus/mhi/core/init.c >>>>>> +++ b/drivers/bus/mhi/core/init.c >>>>>> @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = { >>>>>> [MHI_EE_WFW] = "WFW", >>>>>> [MHI_EE_PTHRU] = "PASS THRU", >>>>>> [MHI_EE_EDL] = "EDL", >>>>>> + [MHI_EE_FP] = "FP", >>>>>> [MHI_EE_DISABLE_TRANSITION] = "DISABLE", >>>>>> [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED", >>>>>> }; >>>>>> @@ -35,6 +36,7 @@ const char * const >>>>>> dev_state_tran_str[DEV_ST_TRANSITION_MAX] = { >>>>>> [DEV_ST_TRANSITION_READY] = "READY", >>>>>> [DEV_ST_TRANSITION_SBL] = "SBL", >>>>>> [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE", >>>>>> + [DEV_ST_TRANSITION_FP] = "FP", >>>>>> [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR", >>>>>> [DEV_ST_TRANSITION_DISABLE] = "DISABLE", >>>>>> }; >>>>>> diff --git a/drivers/bus/mhi/core/internal.h >>>>>> b/drivers/bus/mhi/core/internal.h index 4abf0cf..6ae897a 100644 >>>>>> --- a/drivers/bus/mhi/core/internal.h >>>>>> +++ b/drivers/bus/mhi/core/internal.h >>>>>> @@ -386,6 +386,7 @@ enum dev_st_transition { >>>>>> DEV_ST_TRANSITION_READY, >>>>>> DEV_ST_TRANSITION_SBL, >>>>>> DEV_ST_TRANSITION_MISSION_MODE, >>>>>> + DEV_ST_TRANSITION_FP, >>>>>> DEV_ST_TRANSITION_SYS_ERR, >>>>>> DEV_ST_TRANSITION_DISABLE, >>>>>> DEV_ST_TRANSITION_MAX, >>>>>> diff --git a/drivers/bus/mhi/core/main.c >>>>>> b/drivers/bus/mhi/core/main.c index 3950792..e307b58 100644 >>>>>> --- a/drivers/bus/mhi/core/main.c >>>>>> +++ b/drivers/bus/mhi/core/main.c >>>>>> @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct >>>>>> mhi_controller *mhi_cntrl, >>>>>> case MHI_EE_SBL: >>>>>> st = DEV_ST_TRANSITION_SBL; >>>>>> break; >>>>>> + case MHI_EE_FP: >>>>>> + st = DEV_ST_TRANSITION_FP; >>>>>> + break; >>>>>> case MHI_EE_WFW: >>>>>> case MHI_EE_AMSS: >>>>>> st = DEV_ST_TRANSITION_MISSION_MODE; >> diff >>>> --git >>>>>> a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c index >>>>>> 3de7b16..3c95a5d 100644 >>>>>> --- a/drivers/bus/mhi/core/pm.c >>>>>> +++ b/drivers/bus/mhi/core/pm.c >>>>>> @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct >>>>>> mhi_controller *mhi_cntrl, >>>>>> } >>>>>> if (cur_state == MHI_PM_SYS_ERR_PROCESS) { >>>>>> - mhi_ready_state_transition(mhi_cntrl); >>>>>> + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL >>>>>> + && mhi_get_mhi_state(mhi_cntrl) == >> MHI_STATE_RESET) { >>>>>> + write_lock_irq(&mhi_cntrl->pm_lock); >>>>>> + cur_state = mhi_tryset_pm_state(mhi_cntrl, >>>> MHI_PM_POR); >>>>>> + write_unlock_irq(&mhi_cntrl->pm_lock); >>>>>> + mhi_queue_state_transition(mhi_cntrl, >>>>>> DEV_ST_TRANSITION_PBL); >>>>>> + } else { >>>>>> + mhi_ready_state_transition(mhi_cntrl); >>>>>> + } >>>>>> } else { >>>>>> /* Move to disable state */ >>>>>> write_lock_irq(&mhi_cntrl->pm_lock); >>>>>> @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct >>>>>> *work) >>>>>> case DEV_ST_TRANSITION_MISSION_MODE: >>>>>> mhi_pm_mission_mode_transition(mhi_cntrl); >>>>>> break; >>>>>> + case DEV_ST_TRANSITION_FP: >>>>>> + write_lock_irq(&mhi_cntrl->pm_lock); >>>>>> + mhi_cntrl->ee = MHI_EE_FP; >>>>>> + write_unlock_irq(&mhi_cntrl->pm_lock); >>>>>> + mhi_create_devices(mhi_cntrl); >>>>>> + break; >>>>>> case DEV_ST_TRANSITION_READY: >>>>>> mhi_ready_state_transition(mhi_cntrl); >>>>>> break; >>>>>> diff --git a/include/linux/mhi.h b/include/linux/mhi.h index >>>>>> 6e1122c..4620af8 100644 >>>>>> --- a/include/linux/mhi.h >>>>>> +++ b/include/linux/mhi.h >>>>>> @@ -120,6 +120,7 @@ struct mhi_link_info { >>>>>> * @MHI_EE_WFW: WLAN firmware mode >>>>>> * @MHI_EE_PTHRU: Passthrough >>>>>> * @MHI_EE_EDL: Embedded downloader >>>>>> + * @MHI_EE_FP, Flash Programmer Environment >>>>>> */ >>>>>> enum mhi_ee_type { >>>>>> MHI_EE_PBL, >>>>>> @@ -129,7 +130,8 @@ enum mhi_ee_type { >>>>>> MHI_EE_WFW, >>>>>> MHI_EE_PTHRU, >>>>>> MHI_EE_EDL, >>>>>> - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, >>>>>> + MHI_EE_FP, >>>>>> + MHI_EE_MAX_SUPPORTED = MHI_EE_FP, >>>>>> MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi >>>>>> spec */ >>>>>> MHI_EE_NOT_SUPPORTED, >>>>>> MHI_EE_MAX, >>>>>> >>>>> >>>>> This gets a NACK from me. I don't see the FP_EE that this patch >>>>> introduces defined in the spec. Where did it come from? >>>>> >>>> There is indeed a FP EE, BHI spec will be updated with this EE next month. >>>> >>>> Basically, once device goes to EDL, flash programmer image is >>>> downloaded using BHI protocol (same as we download SBL image using >>>> BHI from PBL in current use case). Once it is downloaded intvec sends >>>> EE change event for FP. Also event is generated for the same which is >>>> used to create EDL channels (34, 35) which is used by flash programmer to >> flash image for AMSS. >>>> >>> [carl.yin] I am refer to QUALLCOMM's windows MHI driver. >>> And the patch work well on my SDX24&SDX55 modems. >>> I can use it to upgrade my modems. >> >> Linaro has an opensource utility that implements firehose - >> https://github.com/andersson/qdl >> >> Did you test with that? > [carl.yin] I am test with https://github.com/carlyin/mhi_for_quectel_modem/blob/main/tools/firehose_protocol.c > Firehose protocol is same for mhi and usb device, > and different on download edl image. > For usb device, use space tool download edl image by sahara protocol, > For mhi device, mhi driver download edl image by BHI interface, > For wwan device, it is better do it in user space. Your utility has no license on it, so it looks like no one but you can use it. This is not good, particularly when an opensource alternative exists. I would like to use EDL over MHI in future, but right now it looks like that is not possible. Additionally, we shouldn't have N tools, when one would do. Having different tools for usb/mhi/wwan seems like a poor user experience. Please test with the Linaro implementation. If it doesn't work, please work with Linaro to update it.
diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c index 24422f5..ab39ad6 100644 --- a/drivers/bus/mhi/core/boot.c +++ b/drivers/bus/mhi/core/boot.c @@ -460,8 +460,10 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) return; } - if (mhi_cntrl->ee == MHI_EE_EDL) + if (mhi_cntrl->ee == MHI_EE_EDL) { + mhi_ready_state_transition(mhi_cntrl); return; + } write_lock_irq(&mhi_cntrl->pm_lock); mhi_cntrl->dev_state = MHI_STATE_RESET; diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c index ac4aa5c..9c2c2f3 100644 --- a/drivers/bus/mhi/core/init.c +++ b/drivers/bus/mhi/core/init.c @@ -26,6 +26,7 @@ const char * const mhi_ee_str[MHI_EE_MAX] = { [MHI_EE_WFW] = "WFW", [MHI_EE_PTHRU] = "PASS THRU", [MHI_EE_EDL] = "EDL", + [MHI_EE_FP] = "FP", [MHI_EE_DISABLE_TRANSITION] = "DISABLE", [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED", }; @@ -35,6 +36,7 @@ const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX] = { [DEV_ST_TRANSITION_READY] = "READY", [DEV_ST_TRANSITION_SBL] = "SBL", [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION_MODE", + [DEV_ST_TRANSITION_FP] = "FP", [DEV_ST_TRANSITION_SYS_ERR] = "SYS_ERR", [DEV_ST_TRANSITION_DISABLE] = "DISABLE", }; diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h index 4abf0cf..6ae897a 100644 --- a/drivers/bus/mhi/core/internal.h +++ b/drivers/bus/mhi/core/internal.h @@ -386,6 +386,7 @@ enum dev_st_transition { DEV_ST_TRANSITION_READY, DEV_ST_TRANSITION_SBL, DEV_ST_TRANSITION_MISSION_MODE, + DEV_ST_TRANSITION_FP, DEV_ST_TRANSITION_SYS_ERR, DEV_ST_TRANSITION_DISABLE, DEV_ST_TRANSITION_MAX, diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c index 3950792..e307b58 100644 --- a/drivers/bus/mhi/core/main.c +++ b/drivers/bus/mhi/core/main.c @@ -782,6 +782,9 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl, case MHI_EE_SBL: st = DEV_ST_TRANSITION_SBL; break; + case MHI_EE_FP: + st = DEV_ST_TRANSITION_FP; + break; case MHI_EE_WFW: case MHI_EE_AMSS: st = DEV_ST_TRANSITION_MISSION_MODE; diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c index 3de7b16..3c95a5d 100644 --- a/drivers/bus/mhi/core/pm.c +++ b/drivers/bus/mhi/core/pm.c @@ -563,7 +563,15 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl, } if (cur_state == MHI_PM_SYS_ERR_PROCESS) { - mhi_ready_state_transition(mhi_cntrl); + if (mhi_get_exec_env(mhi_cntrl) == MHI_EE_EDL + && mhi_get_mhi_state(mhi_cntrl) == MHI_STATE_RESET) { + write_lock_irq(&mhi_cntrl->pm_lock); + cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_POR); + write_unlock_irq(&mhi_cntrl->pm_lock); + mhi_queue_state_transition(mhi_cntrl, DEV_ST_TRANSITION_PBL); + } else { + mhi_ready_state_transition(mhi_cntrl); + } } else { /* Move to disable state */ write_lock_irq(&mhi_cntrl->pm_lock); @@ -658,6 +666,12 @@ void mhi_pm_st_worker(struct work_struct *work) case DEV_ST_TRANSITION_MISSION_MODE: mhi_pm_mission_mode_transition(mhi_cntrl); break; + case DEV_ST_TRANSITION_FP: + write_lock_irq(&mhi_cntrl->pm_lock); + mhi_cntrl->ee = MHI_EE_FP; + write_unlock_irq(&mhi_cntrl->pm_lock); + mhi_create_devices(mhi_cntrl); + break; case DEV_ST_TRANSITION_READY: mhi_ready_state_transition(mhi_cntrl); break; diff --git a/include/linux/mhi.h b/include/linux/mhi.h index 6e1122c..4620af8 100644 --- a/include/linux/mhi.h +++ b/include/linux/mhi.h @@ -120,6 +120,7 @@ struct mhi_link_info { * @MHI_EE_WFW: WLAN firmware mode * @MHI_EE_PTHRU: Passthrough * @MHI_EE_EDL: Embedded downloader + * @MHI_EE_FP, Flash Programmer Environment */ enum mhi_ee_type { MHI_EE_PBL, @@ -129,7 +130,8 @@ enum mhi_ee_type { MHI_EE_WFW, MHI_EE_PTHRU, MHI_EE_EDL, - MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, + MHI_EE_FP, + MHI_EE_MAX_SUPPORTED = MHI_EE_FP, MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */ MHI_EE_NOT_SUPPORTED, MHI_EE_MAX,