| Message ID | 20201028074232.22922-2-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add GCC and RPMh clock support for SDX55 | expand |
On Wed, Oct 28, 2020 at 01:12:29PM +0530, Manivannan Sadhasivam wrote: > From: Vinod Koul <vkoul@kernel.org> > > Add device tree bindings for global clock controller on SDX55 SoCs. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> This should carry your S-o-b too. > --- > .../bindings/clock/qcom,gcc-sdx55.yaml | 71 +++++++++++ > include/dt-bindings/clock/qcom,gcc-sdx55.h | 112 ++++++++++++++++++ > 2 files changed, 183 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml > create mode 100644 include/dt-bindings/clock/qcom,gcc-sdx55.h > > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml > new file mode 100644 > index 000000000000..c24c9d9fb7dc > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml > @@ -0,0 +1,71 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Global Clock & Reset Controller Binding for SDX55 > + > +maintainers: > + - Vinod Koul <vkoul@kernel.org> > + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > + > +description: | > + Qualcomm global clock control module which supports the clocks, resets and > + power domains on SDX55 > + > + See also: > + - dt-bindings/clock/qcom,gcc-sdx55.h > + > +properties: > + compatible: > + const: qcom,gcc-sdx55 > + > + clocks: > + items: > + - description: Board XO source > + - description: Sleep clock source > + > + clock-names: > + items: > + - const: bi_tcxo > + - const: sleep_clk > + > + '#clock-cells': > + const: 1 > + > + '#reset-cells': > + const: 1 > + > + '#power-domain-cells': > + const: 1 > + > + reg: > + maxItems: 1 > + > +required: > + - compatible > + - clocks > + - clock-names > + - reg > + - '#clock-cells' > + - '#reset-cells' > + - '#power-domain-cells' > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,rpmh.h> > + clock-controller@100000 { > + compatible = "qcom,gcc-sdx55"; > + reg = <0x00100000 0x1f0000>; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&sleep_clk>; > + clock-names = "bi_tcxo", "sleep_clk"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > +... > diff --git a/include/dt-bindings/clock/qcom,gcc-sdx55.h b/include/dt-bindings/clock/qcom,gcc-sdx55.h > new file mode 100644 > index 000000000000..09ca45c6de73 > --- /dev/null > +++ b/include/dt-bindings/clock/qcom,gcc-sdx55.h > @@ -0,0 +1,112 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ Dual license? > +/* > + * Copyright (c) 2018, The Linux Foundation. All rights reserved. > + * Copyright (c) 2020, Linaro Ltd. > + */ > + > +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SDX55_H > +#define _DT_BINDINGS_CLK_QCOM_GCC_SDX55_H > + > +#define GPLL0 3 > +#define GPLL0_OUT_EVEN 4 > +#define GPLL4 5 > +#define GPLL4_OUT_EVEN 6 > +#define GPLL5 7 > +#define GCC_AHB_PCIE_LINK_CLK 8 > +#define GCC_BLSP1_AHB_CLK 9 > +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 10 > +#define GCC_BLSP1_QUP1_I2C_APPS_CLK_SRC 11 > +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 12 > +#define GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC 13 > +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 14 > +#define GCC_BLSP1_QUP2_I2C_APPS_CLK_SRC 15 > +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 16 > +#define GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC 17 > +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 18 > +#define GCC_BLSP1_QUP3_I2C_APPS_CLK_SRC 19 > +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 20 > +#define GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC 21 > +#define GCC_BLSP1_QUP4_I2C_APPS_CLK 22 > +#define GCC_BLSP1_QUP4_I2C_APPS_CLK_SRC 23 > +#define GCC_BLSP1_QUP4_SPI_APPS_CLK 24 > +#define GCC_BLSP1_QUP4_SPI_APPS_CLK_SRC 25 > +#define GCC_BLSP1_UART1_APPS_CLK 26 > +#define GCC_BLSP1_UART1_APPS_CLK_SRC 27 > +#define GCC_BLSP1_UART2_APPS_CLK 28 > +#define GCC_BLSP1_UART2_APPS_CLK_SRC 29 > +#define GCC_BLSP1_UART3_APPS_CLK 30 > +#define GCC_BLSP1_UART3_APPS_CLK_SRC 31 > +#define GCC_BLSP1_UART4_APPS_CLK 32 > +#define GCC_BLSP1_UART4_APPS_CLK_SRC 33 > +#define GCC_BOOT_ROM_AHB_CLK 34 > +#define GCC_CE1_AHB_CLK 35 > +#define GCC_CE1_AXI_CLK 36 > +#define GCC_CE1_CLK 37 > +#define GCC_CPUSS_AHB_CLK 38 > +#define GCC_CPUSS_AHB_CLK_SRC 39 > +#define GCC_CPUSS_GNOC_CLK 40 > +#define GCC_CPUSS_RBCPR_CLK 41 > +#define GCC_CPUSS_RBCPR_CLK_SRC 42 > +#define GCC_EMAC_CLK_SRC 43 > +#define GCC_EMAC_PTP_CLK_SRC 44 > +#define GCC_ETH_AXI_CLK 45 > +#define GCC_ETH_PTP_CLK 46 > +#define GCC_ETH_RGMII_CLK 47 > +#define GCC_ETH_SLAVE_AHB_CLK 48 > +#define GCC_GP1_CLK 49 > +#define GCC_GP1_CLK_SRC 50 > +#define GCC_GP2_CLK 51 > +#define GCC_GP2_CLK_SRC 52 > +#define GCC_GP3_CLK 53 > +#define GCC_GP3_CLK_SRC 54 > +#define GCC_PCIE_0_CLKREF_CLK 55 > +#define GCC_PCIE_AUX_CLK 56 > +#define GCC_PCIE_AUX_PHY_CLK_SRC 57 > +#define GCC_PCIE_CFG_AHB_CLK 58 > +#define GCC_PCIE_MSTR_AXI_CLK 59 > +#define GCC_PCIE_PIPE_CLK 60 > +#define GCC_PCIE_RCHNG_PHY_CLK 61 > +#define GCC_PCIE_RCHNG_PHY_CLK_SRC 62 > +#define GCC_PCIE_SLEEP_CLK 63 > +#define GCC_PCIE_SLV_AXI_CLK 64 > +#define GCC_PCIE_SLV_Q2A_AXI_CLK 65 > +#define GCC_PDM2_CLK 66 > +#define GCC_PDM2_CLK_SRC 67 > +#define GCC_PDM_AHB_CLK 68 > +#define GCC_PDM_XO4_CLK 69 > +#define GCC_SDCC1_AHB_CLK 70 > +#define GCC_SDCC1_APPS_CLK 71 > +#define GCC_SDCC1_APPS_CLK_SRC 72 > +#define GCC_SYS_NOC_CPUSS_AHB_CLK 73 > +#define GCC_USB30_MASTER_CLK 74 > +#define GCC_USB30_MASTER_CLK_SRC 75 > +#define GCC_USB30_MOCK_UTMI_CLK 76 > +#define GCC_USB30_MOCK_UTMI_CLK_SRC 77 > +#define GCC_USB30_MSTR_AXI_CLK 78 > +#define GCC_USB30_SLEEP_CLK 79 > +#define GCC_USB30_SLV_AHB_CLK 80 > +#define GCC_USB3_PHY_AUX_CLK 81 > +#define GCC_USB3_PHY_AUX_CLK_SRC 82 > +#define GCC_USB3_PHY_PIPE_CLK 83 > +#define GCC_USB3_PRIM_CLKREF_CLK 84 > +#define GCC_USB_PHY_CFG_AHB2PHY_CLK 85 > +#define GCC_XO_DIV4_CLK 86 > +#define GCC_XO_PCIE_LINK_CLK 87 > + > +#define GCC_EMAC_BCR 0 > +#define GCC_PCIE_BCR 1 > +#define GCC_PCIE_LINK_DOWN_BCR 2 > +#define GCC_PCIE_NOCSR_COM_PHY_BCR 3 > +#define GCC_PCIE_PHY_BCR 4 > +#define GCC_PCIE_PHY_CFG_AHB_BCR 5 > +#define GCC_PCIE_PHY_COM_BCR 6 > +#define GCC_PCIE_PHY_NOCSR_COM_PHY_BCR 7 > +#define GCC_PDM_BCR 8 > +#define GCC_QUSB2PHY_BCR 9 > +#define GCC_TCSR_PCIE_BCR 10 > +#define GCC_USB30_BCR 11 > +#define GCC_USB3_PHY_BCR 12 > +#define GCC_USB3PHY_PHY_BCR 13 > +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 14 > + > +#endif > -- > 2.17.1 >
Hi Rob, On Fri, Oct 30, 2020 at 02:22:25PM -0500, Rob Herring wrote: > On Wed, Oct 28, 2020 at 01:12:29PM +0530, Manivannan Sadhasivam wrote: > > From: Vinod Koul <vkoul@kernel.org> > > > > Add device tree bindings for global clock controller on SDX55 SoCs. > > > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > > This should carry your S-o-b too. > Ah yes! > > --- > > .../bindings/clock/qcom,gcc-sdx55.yaml | 71 +++++++++++ > > include/dt-bindings/clock/qcom,gcc-sdx55.h | 112 ++++++++++++++++++ > > 2 files changed, 183 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml > > create mode 100644 include/dt-bindings/clock/qcom,gcc-sdx55.h > > [...] > > diff --git a/include/dt-bindings/clock/qcom,gcc-sdx55.h b/include/dt-bindings/clock/qcom,gcc-sdx55.h > > new file mode 100644 > > index 000000000000..09ca45c6de73 > > --- /dev/null > > +++ b/include/dt-bindings/clock/qcom,gcc-sdx55.h > > @@ -0,0 +1,112 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > Dual license? > The downstream code just lists the GPL2.0 and I'm not sure if I can make it as dual license. Whereas the binding we made it dual license since we authored it. Thanks, Mani > > +/* > > + * Copyright (c) 2018, The Linux Foundation. All rights reserved. > > + * Copyright (c) 2020, Linaro Ltd. > > + */ > > + > > +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SDX55_H > > +#define _DT_BINDINGS_CLK_QCOM_GCC_SDX55_H > > + > > +#define GPLL0 3 > > +#define GPLL0_OUT_EVEN 4 > > +#define GPLL4 5 > > +#define GPLL4_OUT_EVEN 6 > > +#define GPLL5 7 > > +#define GCC_AHB_PCIE_LINK_CLK 8 > > +#define GCC_BLSP1_AHB_CLK 9 > > +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 10 > > +#define GCC_BLSP1_QUP1_I2C_APPS_CLK_SRC 11 > > +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 12 > > +#define GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC 13 > > +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 14 > > +#define GCC_BLSP1_QUP2_I2C_APPS_CLK_SRC 15 > > +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 16 > > +#define GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC 17 > > +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 18 > > +#define GCC_BLSP1_QUP3_I2C_APPS_CLK_SRC 19 > > +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 20 > > +#define GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC 21 > > +#define GCC_BLSP1_QUP4_I2C_APPS_CLK 22 > > +#define GCC_BLSP1_QUP4_I2C_APPS_CLK_SRC 23 > > +#define GCC_BLSP1_QUP4_SPI_APPS_CLK 24 > > +#define GCC_BLSP1_QUP4_SPI_APPS_CLK_SRC 25 > > +#define GCC_BLSP1_UART1_APPS_CLK 26 > > +#define GCC_BLSP1_UART1_APPS_CLK_SRC 27 > > +#define GCC_BLSP1_UART2_APPS_CLK 28 > > +#define GCC_BLSP1_UART2_APPS_CLK_SRC 29 > > +#define GCC_BLSP1_UART3_APPS_CLK 30 > > +#define GCC_BLSP1_UART3_APPS_CLK_SRC 31 > > +#define GCC_BLSP1_UART4_APPS_CLK 32 > > +#define GCC_BLSP1_UART4_APPS_CLK_SRC 33 > > +#define GCC_BOOT_ROM_AHB_CLK 34 > > +#define GCC_CE1_AHB_CLK 35 > > +#define GCC_CE1_AXI_CLK 36 > > +#define GCC_CE1_CLK 37 > > +#define GCC_CPUSS_AHB_CLK 38 > > +#define GCC_CPUSS_AHB_CLK_SRC 39 > > +#define GCC_CPUSS_GNOC_CLK 40 > > +#define GCC_CPUSS_RBCPR_CLK 41 > > +#define GCC_CPUSS_RBCPR_CLK_SRC 42 > > +#define GCC_EMAC_CLK_SRC 43 > > +#define GCC_EMAC_PTP_CLK_SRC 44 > > +#define GCC_ETH_AXI_CLK 45 > > +#define GCC_ETH_PTP_CLK 46 > > +#define GCC_ETH_RGMII_CLK 47 > > +#define GCC_ETH_SLAVE_AHB_CLK 48 > > +#define GCC_GP1_CLK 49 > > +#define GCC_GP1_CLK_SRC 50 > > +#define GCC_GP2_CLK 51 > > +#define GCC_GP2_CLK_SRC 52 > > +#define GCC_GP3_CLK 53 > > +#define GCC_GP3_CLK_SRC 54 > > +#define GCC_PCIE_0_CLKREF_CLK 55 > > +#define GCC_PCIE_AUX_CLK 56 > > +#define GCC_PCIE_AUX_PHY_CLK_SRC 57 > > +#define GCC_PCIE_CFG_AHB_CLK 58 > > +#define GCC_PCIE_MSTR_AXI_CLK 59 > > +#define GCC_PCIE_PIPE_CLK 60 > > +#define GCC_PCIE_RCHNG_PHY_CLK 61 > > +#define GCC_PCIE_RCHNG_PHY_CLK_SRC 62 > > +#define GCC_PCIE_SLEEP_CLK 63 > > +#define GCC_PCIE_SLV_AXI_CLK 64 > > +#define GCC_PCIE_SLV_Q2A_AXI_CLK 65 > > +#define GCC_PDM2_CLK 66 > > +#define GCC_PDM2_CLK_SRC 67 > > +#define GCC_PDM_AHB_CLK 68 > > +#define GCC_PDM_XO4_CLK 69 > > +#define GCC_SDCC1_AHB_CLK 70 > > +#define GCC_SDCC1_APPS_CLK 71 > > +#define GCC_SDCC1_APPS_CLK_SRC 72 > > +#define GCC_SYS_NOC_CPUSS_AHB_CLK 73 > > +#define GCC_USB30_MASTER_CLK 74 > > +#define GCC_USB30_MASTER_CLK_SRC 75 > > +#define GCC_USB30_MOCK_UTMI_CLK 76 > > +#define GCC_USB30_MOCK_UTMI_CLK_SRC 77 > > +#define GCC_USB30_MSTR_AXI_CLK 78 > > +#define GCC_USB30_SLEEP_CLK 79 > > +#define GCC_USB30_SLV_AHB_CLK 80 > > +#define GCC_USB3_PHY_AUX_CLK 81 > > +#define GCC_USB3_PHY_AUX_CLK_SRC 82 > > +#define GCC_USB3_PHY_PIPE_CLK 83 > > +#define GCC_USB3_PRIM_CLKREF_CLK 84 > > +#define GCC_USB_PHY_CFG_AHB2PHY_CLK 85 > > +#define GCC_XO_DIV4_CLK 86 > > +#define GCC_XO_PCIE_LINK_CLK 87 > > + > > +#define GCC_EMAC_BCR 0 > > +#define GCC_PCIE_BCR 1 > > +#define GCC_PCIE_LINK_DOWN_BCR 2 > > +#define GCC_PCIE_NOCSR_COM_PHY_BCR 3 > > +#define GCC_PCIE_PHY_BCR 4 > > +#define GCC_PCIE_PHY_CFG_AHB_BCR 5 > > +#define GCC_PCIE_PHY_COM_BCR 6 > > +#define GCC_PCIE_PHY_NOCSR_COM_PHY_BCR 7 > > +#define GCC_PDM_BCR 8 > > +#define GCC_QUSB2PHY_BCR 9 > > +#define GCC_TCSR_PCIE_BCR 10 > > +#define GCC_USB30_BCR 11 > > +#define GCC_USB3_PHY_BCR 12 > > +#define GCC_USB3PHY_PHY_BCR 13 > > +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 14 > > + > > +#endif > > -- > > 2.17.1 > >
Quoting Manivannan Sadhasivam (2020-10-30 20:29:44) > Hi Rob, > > On Fri, Oct 30, 2020 at 02:22:25PM -0500, Rob Herring wrote: > > On Wed, Oct 28, 2020 at 01:12:29PM +0530, Manivannan Sadhasivam wrote: > > > From: Vinod Koul <vkoul@kernel.org> > > > > > > Add device tree bindings for global clock controller on SDX55 SoCs. > > > > > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > > > > This should carry your S-o-b too. > > > > Ah yes! > > > > --- > > > .../bindings/clock/qcom,gcc-sdx55.yaml | 71 +++++++++++ > > > include/dt-bindings/clock/qcom,gcc-sdx55.h | 112 ++++++++++++++++++ > > > 2 files changed, 183 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml > > > create mode 100644 include/dt-bindings/clock/qcom,gcc-sdx55.h > > > > > [...] > > > > diff --git a/include/dt-bindings/clock/qcom,gcc-sdx55.h b/include/dt-bindings/clock/qcom,gcc-sdx55.h > > > new file mode 100644 > > > index 000000000000..09ca45c6de73 > > > --- /dev/null > > > +++ b/include/dt-bindings/clock/qcom,gcc-sdx55.h > > > @@ -0,0 +1,112 @@ > > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > > > Dual license? > > > > The downstream code just lists the GPL2.0 and I'm not sure if I can make > it as dual license. Whereas the binding we made it dual license since we Can you check? qcom has been doing it so I suspect you should just ask.
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml new file mode 100644 index 000000000000..c24c9d9fb7dc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SDX55 + +maintainers: + - Vinod Koul <vkoul@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SDX55 + + See also: + - dt-bindings/clock/qcom,gcc-sdx55.h + +properties: + compatible: + const: qcom,gcc-sdx55 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sdx55"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/include/dt-bindings/clock/qcom,gcc-sdx55.h b/include/dt-bindings/clock/qcom,gcc-sdx55.h new file mode 100644 index 000000000000..09ca45c6de73 --- /dev/null +++ b/include/dt-bindings/clock/qcom,gcc-sdx55.h @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Ltd. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SDX55_H +#define _DT_BINDINGS_CLK_QCOM_GCC_SDX55_H + +#define GPLL0 3 +#define GPLL0_OUT_EVEN 4 +#define GPLL4 5 +#define GPLL4_OUT_EVEN 6 +#define GPLL5 7 +#define GCC_AHB_PCIE_LINK_CLK 8 +#define GCC_BLSP1_AHB_CLK 9 +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 10 +#define GCC_BLSP1_QUP1_I2C_APPS_CLK_SRC 11 +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 12 +#define GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC 13 +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 14 +#define GCC_BLSP1_QUP2_I2C_APPS_CLK_SRC 15 +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 16 +#define GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC 17 +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 18 +#define GCC_BLSP1_QUP3_I2C_APPS_CLK_SRC 19 +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 20 +#define GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC 21 +#define GCC_BLSP1_QUP4_I2C_APPS_CLK 22 +#define GCC_BLSP1_QUP4_I2C_APPS_CLK_SRC 23 +#define GCC_BLSP1_QUP4_SPI_APPS_CLK 24 +#define GCC_BLSP1_QUP4_SPI_APPS_CLK_SRC 25 +#define GCC_BLSP1_UART1_APPS_CLK 26 +#define GCC_BLSP1_UART1_APPS_CLK_SRC 27 +#define GCC_BLSP1_UART2_APPS_CLK 28 +#define GCC_BLSP1_UART2_APPS_CLK_SRC 29 +#define GCC_BLSP1_UART3_APPS_CLK 30 +#define GCC_BLSP1_UART3_APPS_CLK_SRC 31 +#define GCC_BLSP1_UART4_APPS_CLK 32 +#define GCC_BLSP1_UART4_APPS_CLK_SRC 33 +#define GCC_BOOT_ROM_AHB_CLK 34 +#define GCC_CE1_AHB_CLK 35 +#define GCC_CE1_AXI_CLK 36 +#define GCC_CE1_CLK 37 +#define GCC_CPUSS_AHB_CLK 38 +#define GCC_CPUSS_AHB_CLK_SRC 39 +#define GCC_CPUSS_GNOC_CLK 40 +#define GCC_CPUSS_RBCPR_CLK 41 +#define GCC_CPUSS_RBCPR_CLK_SRC 42 +#define GCC_EMAC_CLK_SRC 43 +#define GCC_EMAC_PTP_CLK_SRC 44 +#define GCC_ETH_AXI_CLK 45 +#define GCC_ETH_PTP_CLK 46 +#define GCC_ETH_RGMII_CLK 47 +#define GCC_ETH_SLAVE_AHB_CLK 48 +#define GCC_GP1_CLK 49 +#define GCC_GP1_CLK_SRC 50 +#define GCC_GP2_CLK 51 +#define GCC_GP2_CLK_SRC 52 +#define GCC_GP3_CLK 53 +#define GCC_GP3_CLK_SRC 54 +#define GCC_PCIE_0_CLKREF_CLK 55 +#define GCC_PCIE_AUX_CLK 56 +#define GCC_PCIE_AUX_PHY_CLK_SRC 57 +#define GCC_PCIE_CFG_AHB_CLK 58 +#define GCC_PCIE_MSTR_AXI_CLK 59 +#define GCC_PCIE_PIPE_CLK 60 +#define GCC_PCIE_RCHNG_PHY_CLK 61 +#define GCC_PCIE_RCHNG_PHY_CLK_SRC 62 +#define GCC_PCIE_SLEEP_CLK 63 +#define GCC_PCIE_SLV_AXI_CLK 64 +#define GCC_PCIE_SLV_Q2A_AXI_CLK 65 +#define GCC_PDM2_CLK 66 +#define GCC_PDM2_CLK_SRC 67 +#define GCC_PDM_AHB_CLK 68 +#define GCC_PDM_XO4_CLK 69 +#define GCC_SDCC1_AHB_CLK 70 +#define GCC_SDCC1_APPS_CLK 71 +#define GCC_SDCC1_APPS_CLK_SRC 72 +#define GCC_SYS_NOC_CPUSS_AHB_CLK 73 +#define GCC_USB30_MASTER_CLK 74 +#define GCC_USB30_MASTER_CLK_SRC 75 +#define GCC_USB30_MOCK_UTMI_CLK 76 +#define GCC_USB30_MOCK_UTMI_CLK_SRC 77 +#define GCC_USB30_MSTR_AXI_CLK 78 +#define GCC_USB30_SLEEP_CLK 79 +#define GCC_USB30_SLV_AHB_CLK 80 +#define GCC_USB3_PHY_AUX_CLK 81 +#define GCC_USB3_PHY_AUX_CLK_SRC 82 +#define GCC_USB3_PHY_PIPE_CLK 83 +#define GCC_USB3_PRIM_CLKREF_CLK 84 +#define GCC_USB_PHY_CFG_AHB2PHY_CLK 85 +#define GCC_XO_DIV4_CLK 86 +#define GCC_XO_PCIE_LINK_CLK 87 + +#define GCC_EMAC_BCR 0 +#define GCC_PCIE_BCR 1 +#define GCC_PCIE_LINK_DOWN_BCR 2 +#define GCC_PCIE_NOCSR_COM_PHY_BCR 3 +#define GCC_PCIE_PHY_BCR 4 +#define GCC_PCIE_PHY_CFG_AHB_BCR 5 +#define GCC_PCIE_PHY_COM_BCR 6 +#define GCC_PCIE_PHY_NOCSR_COM_PHY_BCR 7 +#define GCC_PDM_BCR 8 +#define GCC_QUSB2PHY_BCR 9 +#define GCC_TCSR_PCIE_BCR 10 +#define GCC_USB30_BCR 11 +#define GCC_USB3_PHY_BCR 12 +#define GCC_USB3PHY_PHY_BCR 13 +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 14 + +#endif