diff mbox series

arm64: dts: qcom: update usb qmp phy clock-cells property

Message ID 20201123143705.14277-1-jonathan@marek.ca (mailing list archive)
State New, archived
Headers show
Series arm64: dts: qcom: update usb qmp phy clock-cells property | expand

Commit Message

Jonathan Marek Nov. 23, 2020, 2:37 p.m. UTC 
The top-level node doesn't provide any clocks, the subnode provides a
single clock with of_clk_hw_simple_get.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 -
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 4 ++--
 4 files changed, 6 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6678f1e8e395..0189cbfad521 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2608,7 +2608,6 @@  usb_1_qmpphy: phy-wrapper@88e9000 {
 			      <0 0x088e8000 0 0x38>;
 			reg-names = "reg-base", "dp_com";
 			status = "disabled";
-			#clock-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 40e8c11f23ab..4a353c432a83 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3482,7 +3482,6 @@  usb_1_qmpphy: phy@88e9000 {
 			      <0 0x088e8000 0 0x10>;
 			reg-names = "reg-base", "dp_com";
 			status = "disabled";
-			#clock-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -3504,6 +3503,7 @@  usb_1_ssphy: lanes@88e9200 {
 				      <0 0x088e9600 0 0x128>,
 				      <0 0x088e9800 0 0x200>,
 				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
 				#phy-cells = <0>;
 				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
 				clock-names = "pipe0";
@@ -3515,7 +3515,6 @@  usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
 			reg = <0 0x088eb000 0 0x18c>;
 			status = "disabled";
-			#clock-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -3535,6 +3534,7 @@  usb_2_ssphy: lane@88eb200 {
 				      <0 0x088eb400 0 0x1fc>,
 				      <0 0x088eb800 0 0x218>,
 				      <0 0x088eb600 0 0x70>;
+				#clock-cells = <0>;
 				#phy-cells = <0>;
 				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
 				clock-names = "pipe0";
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index dab852833a65..bcfb06f5bebe 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -857,7 +857,6 @@  usb_1_qmpphy: phy@88e9000 {
 			      <0 0x088e8000 0 0x10>;
 			reg-names = "reg-base", "dp_com";
 			status = "disabled";
-			#clock-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -879,6 +878,7 @@  usb_1_ssphy: lanes@88e9200 {
 				      <0 0x088e9600 0 0x200>,
 				      <0 0x088e9800 0 0x200>,
 				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
 				#phy-cells = <0>;
 				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
 				clock-names = "pipe0";
@@ -904,7 +904,6 @@  usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
 			reg = <0 0x088eb000 0 0x200>;
 			status = "disabled";
-			#clock-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -924,6 +923,7 @@  usb_2_ssphy: lane@88eb200 {
 				      <0 0x088eb400 0 0x200>,
 				      <0 0x088eb800 0 0x800>,
 				      <0 0x088eb600 0 0x200>;
+				#clock-cells = <0>;
 				#phy-cells = <0>;
 				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
 				clock-names = "pipe0";
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 8300a5873a21..468ba1d18751 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1494,7 +1494,6 @@  usb_1_qmpphy: phy@88e9000 {
 			      <0 0x088e8000 0 0x20>;
 			reg-names = "reg-base", "dp_com";
 			status = "disabled";
-			#clock-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -1515,6 +1514,7 @@  usb_1_ssphy: lanes@88e9200 {
 				      <0 0x088e9600 0 0x200>,
 				      <0 0x088e9800 0 0x200>,
 				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
 				#phy-cells = <0>;
 				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
 				clock-names = "pipe0";
@@ -1526,7 +1526,6 @@  usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
 			reg = <0 0x088eb000 0 0x200>;
 			status = "disabled";
-			#clock-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -1545,6 +1544,7 @@  usb_2_ssphy: lane@88eb200 {
 				reg = <0 0x088eb200 0 0x200>,
 				      <0 0x088eb400 0 0x200>,
 				      <0 0x088eb800 0 0x800>;
+				#clock-cells = <0>;
 				#phy-cells = <0>;
 				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
 				clock-names = "pipe0";