diff mbox series

[v2,09/18] ARM: dts: qcom: sdx55: Add QPIC BAM support

Message ID 20210105122649.13581-10-manivannan.sadhasivam@linaro.org (mailing list archive)
State Superseded
Headers show
Series Devicetree update for SDX55 platform | expand

Commit Message

Manivannan Sadhasivam Jan. 5, 2021, 12:26 p.m. UTC 
Add qpic_bam node to support QPIC BAM DMA controller on SDX55 platform.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm/boot/dts/qcom-sdx55.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Vinod Koul Jan. 5, 2021, 3:50 p.m. UTC | #1 
On 05-01-21, 17:56, Manivannan Sadhasivam wrote:
> Add qpic_bam node to support QPIC BAM DMA controller on SDX55 platform.

Reviewed-by: Vinod Koul <vkoul@kernel.org>

> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  arch/arm/boot/dts/qcom-sdx55.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
> index 622a63b0058f..1b9b990ad0a2 100644
> --- a/arch/arm/boot/dts/qcom-sdx55.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
> @@ -166,6 +166,18 @@ sdhc_1: sdhci@8804000 {
>  			status = "disabled";
>  		};
>  
> +		qpic_bam: dma@1b04000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0x01b04000 0x1c000>;
> +			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rpmhcc RPMH_QPIC_CLK>;
> +			clock-names = "bam_clk";
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +			qcom,controlled-remotely;
> +			status = "disabled";
> +		};
> +
>  		tcsr_mutex_block: syscon@1f40000 {
>  			compatible = "syscon";
>  			reg = <0x1f40000 0x20000>;
> -- 
> 2.25.1
Vinod Koul Jan. 5, 2021, 3:55 p.m. UTC | #2 
Hi Mani,

On 05-01-21, 21:20, Vinod Koul wrote:
> On 05-01-21, 17:56, Manivannan Sadhasivam wrote:
> > Add qpic_bam node to support QPIC BAM DMA controller on SDX55 platform.
> 
> Reviewed-by: Vinod Koul <vkoul@kernel.org>
> 
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  arch/arm/boot/dts/qcom-sdx55.dtsi | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
> > index 622a63b0058f..1b9b990ad0a2 100644
> > --- a/arch/arm/boot/dts/qcom-sdx55.dtsi
> > +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
> > @@ -166,6 +166,18 @@ sdhc_1: sdhci@8804000 {
> >  			status = "disabled";
> >  		};
> >  
> > +		qpic_bam: dma@1b04000 {

This should be dma-controller@

Also, please run dtbs_check on these patches

> > +			compatible = "qcom,bam-v1.7.0";
> > +			reg = <0x01b04000 0x1c000>;
> > +			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&rpmhcc RPMH_QPIC_CLK>;
> > +			clock-names = "bam_clk";
> > +			#dma-cells = <1>;
> > +			qcom,ee = <0>;
> > +			qcom,controlled-remotely;
> > +			status = "disabled";
> > +		};
> > +
> >  		tcsr_mutex_block: syscon@1f40000 {
> >  			compatible = "syscon";
> >  			reg = <0x1f40000 0x20000>;
> > -- 
> > 2.25.1
> 
> -- 
> ~Vinod
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 622a63b0058f..1b9b990ad0a2 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -166,6 +166,18 @@  sdhc_1: sdhci@8804000 {
 			status = "disabled";
 		};
 
+		qpic_bam: dma@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x01b04000 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
 		tcsr_mutex_block: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x1f40000 0x20000>;