diff mbox series

[v7,3/4] pinctrl: qcom: Properly clear "intr_ack_high" interrupts when unmasking

Message ID 20210114191601.v7.3.I32d0f4e174d45363b49ab611a13c3da8f1e87d0f@changeid (mailing list archive)
State Accepted
Commit a95881d6aa2c000e3649f27a1a7329cf356e6bb3
Headers show
Series [v7,1/4] pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0 | expand

Commit Message

Doug Anderson Jan. 15, 2021, 3:16 a.m. UTC
In commit 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for
msm gpio") we tried to Ack interrupts during unmask.  However, that
patch forgot to check "intr_ack_high" so, presumably, it only worked
for a certain subset of SoCs.

Let's add a small accessor so we don't need to open-code the logic in
both places.

This was found by code inspection.  I don't have any access to the
hardware in question nor software that needs the Ack during unmask.

Fixes: 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for msm gpio")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
It should be noted that this code will be moved in the next patch.  In
theory this could be squashed into the next patch but it seems more
documenting to have this as a separate patch.

(no changes since v6)

Changes in v6:
- Remove unneeded parenthesis.

Changes in v5:
- ("pinctrl: qcom: Properly clear "intr_ack_high" interrupts...") new for v5.

 drivers/pinctrl/qcom/pinctrl-msm.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 2f363c28d9d9..192ed31eabf4 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -96,6 +96,14 @@  MSM_ACCESSOR(intr_cfg)
 MSM_ACCESSOR(intr_status)
 MSM_ACCESSOR(intr_target)
 
+static void msm_ack_intr_status(struct msm_pinctrl *pctrl,
+				const struct msm_pingroup *g)
+{
+	u32 val = g->intr_ack_high ? BIT(g->intr_status_bit) : 0;
+
+	msm_writel_intr_status(val, pctrl, g);
+}
+
 static int msm_get_groups_count(struct pinctrl_dev *pctldev)
 {
 	struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
@@ -797,7 +805,7 @@  static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
 	 * when the interrupt is not in use.
 	 */
 	if (status_clear)
-		msm_writel_intr_status(0, pctrl, g);
+		msm_ack_intr_status(pctrl, g);
 
 	val = msm_readl_intr_cfg(pctrl, g);
 	val |= BIT(g->intr_raw_status_bit);
@@ -890,7 +898,6 @@  static void msm_gpio_irq_ack(struct irq_data *d)
 	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
 	const struct msm_pingroup *g;
 	unsigned long flags;
-	u32 val;
 
 	if (test_bit(d->hwirq, pctrl->skip_wake_irqs)) {
 		if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
@@ -902,8 +909,7 @@  static void msm_gpio_irq_ack(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
-	val = g->intr_ack_high ? BIT(g->intr_status_bit) : 0;
-	msm_writel_intr_status(val, pctrl, g);
+	msm_ack_intr_status(pctrl, g);
 
 	if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
 		msm_gpio_update_dual_edge_pos(pctrl, g, d);