diff mbox series

[18/25] media: venus: hfi: Add 6xx AXI halt logic

Message ID 20210222160300.1811121-19-bryan.odonoghue@linaro.org (mailing list archive)
State Superseded
Headers show
Series media: venus: Enable 6xx support | expand

Commit Message

Bryan O'Donoghue Feb. 22, 2021, 4:02 p.m. UTC
From: Dikshita Agarwal <dikshita@codeaurora.org>

This patch takes the downstream AXI halt routine and applies it when
IS_V6() is true.

bod: Converted to readl_poll_timeout()
     Converted LPI update timeout to dev_dbg. In practice this register
     never appears to update with the value 0x07. Discussing with contacts
     in qcom video team, this toggle only pertains to low-power mode.
     Keeping the write for the sake of fidelity with downstream.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/venus/hfi_venus.c | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)

Comments

Stanimir Varbanov Feb. 25, 2021, 7:29 a.m. UTC | #1
On 2/22/21 6:02 PM, Bryan O'Donoghue wrote:
> From: Dikshita Agarwal <dikshita@codeaurora.org>
> 
> This patch takes the downstream AXI halt routine and applies it when
> IS_V6() is true.
> 
> bod: Converted to readl_poll_timeout()
>      Converted LPI update timeout to dev_dbg. In practice this register
>      never appears to update with the value 0x07. Discussing with contacts
>      in qcom video team, this toggle only pertains to low-power mode.
>      Keeping the write for the sake of fidelity with downstream.
> 
> Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
> Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  drivers/media/platform/qcom/venus/hfi_venus.c | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/venus/hfi_venus.c b/drivers/media/platform/qcom/venus/hfi_venus.c
> index 24cf20f76e7f..01c100db07d3 100644
> --- a/drivers/media/platform/qcom/venus/hfi_venus.c
> +++ b/drivers/media/platform/qcom/venus/hfi_venus.c
> @@ -541,10 +541,55 @@ static int venus_halt_axi(struct venus_hfi_device *hdev)
>  {
>  	void __iomem *wrapper_base = hdev->core->wrapper_base;
>  	void __iomem *vbif_base = hdev->core->vbif_base;
> +	void __iomem *cpu_cs_base = hdev->core->cpu_cs_base;
> +	void __iomem *aon_base = hdev->core->aon_base;
>  	struct device *dev = hdev->core->dev;
>  	u32 val;
> +	u32 mask_val;
>  	int ret;
>  
> +	if (IS_V6(hdev->core)) {
> +		writel(0x3, cpu_cs_base + CPU_CS_X2RPMH_V6);
> +
> +		writel(0x1, aon_base + AON_WRAPPER_MVP_NOC_LPI_CONTROL);
> +		ret = readl_poll_timeout(aon_base + AON_WRAPPER_MVP_NOC_LPI_STATUS,
> +					 val,
> +					 val & BIT(0),
> +					 POLL_INTERVAL_US,
> +					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
> +		if (ret) {
> +			dev_err(dev, "NOC not in qaccept status %x\n", val);

Could you drop this error msg. I don't see any valuable information in it.

> +			return -ETIMEDOUT;
> +		}
> +
> +		/* HPG 6.1.2 Step 3, debug bridge to low power */

This comment does not add any information, please drop it.

> +		mask_val = (BIT(2) | BIT(1) | BIT(0));
> +		writel(mask_val, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
> +
> +		ret = readl_poll_timeout(wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_STATUS_V6,
> +					 val,
> +					 (val & mask_val) == mask_val,
> +					 POLL_INTERVAL_US,
> +					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
> +
> +		if (ret)
> +			dev_dbg(dev, "DBLP Set: status %x\n", val);

Do we need this as well? From what I can see this always timeouts and
increase the time of module loading.

> +
> +		/* HPG 6.1.2 Step 4, debug bridge to lpi release */

ditto

> +		writel(0x00, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
> +		ret = readl_poll_timeout(wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_STATUS_V6,
> +					 val,
> +					 val == 0,
> +					 POLL_INTERVAL_US,
> +					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
> +
> +		if (ret) {
> +			dev_err(dev, "DBLP Release: lpi_status %x\n", val);
> +			return -ETIMEDOUT;
> +		}
> +		return 0;
> +	}
> +
>  	if (IS_V4(hdev->core)) {
>  		val = readl(wrapper_base + WRAPPER_CPU_AXI_HALT);
>  		val |= WRAPPER_CPU_AXI_HALT_HALT;
>
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/venus/hfi_venus.c b/drivers/media/platform/qcom/venus/hfi_venus.c
index 24cf20f76e7f..01c100db07d3 100644
--- a/drivers/media/platform/qcom/venus/hfi_venus.c
+++ b/drivers/media/platform/qcom/venus/hfi_venus.c
@@ -541,10 +541,55 @@  static int venus_halt_axi(struct venus_hfi_device *hdev)
 {
 	void __iomem *wrapper_base = hdev->core->wrapper_base;
 	void __iomem *vbif_base = hdev->core->vbif_base;
+	void __iomem *cpu_cs_base = hdev->core->cpu_cs_base;
+	void __iomem *aon_base = hdev->core->aon_base;
 	struct device *dev = hdev->core->dev;
 	u32 val;
+	u32 mask_val;
 	int ret;
 
+	if (IS_V6(hdev->core)) {
+		writel(0x3, cpu_cs_base + CPU_CS_X2RPMH_V6);
+
+		writel(0x1, aon_base + AON_WRAPPER_MVP_NOC_LPI_CONTROL);
+		ret = readl_poll_timeout(aon_base + AON_WRAPPER_MVP_NOC_LPI_STATUS,
+					 val,
+					 val & BIT(0),
+					 POLL_INTERVAL_US,
+					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
+		if (ret) {
+			dev_err(dev, "NOC not in qaccept status %x\n", val);
+			return -ETIMEDOUT;
+		}
+
+		/* HPG 6.1.2 Step 3, debug bridge to low power */
+		mask_val = (BIT(2) | BIT(1) | BIT(0));
+		writel(mask_val, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
+
+		ret = readl_poll_timeout(wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_STATUS_V6,
+					 val,
+					 (val & mask_val) == mask_val,
+					 POLL_INTERVAL_US,
+					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
+
+		if (ret)
+			dev_dbg(dev, "DBLP Set: status %x\n", val);
+
+		/* HPG 6.1.2 Step 4, debug bridge to lpi release */
+		writel(0x00, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
+		ret = readl_poll_timeout(wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_STATUS_V6,
+					 val,
+					 val == 0,
+					 POLL_INTERVAL_US,
+					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
+
+		if (ret) {
+			dev_err(dev, "DBLP Release: lpi_status %x\n", val);
+			return -ETIMEDOUT;
+		}
+		return 0;
+	}
+
 	if (IS_V4(hdev->core)) {
 		val = readl(wrapper_base + WRAPPER_CPU_AXI_HALT);
 		val |= WRAPPER_CPU_AXI_HALT_HALT;