@@ -41,6 +41,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
new file mode 100644
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pompom (rev1) with LTE";
+ compatible = "google,pompom-rev1-sku0", "qcom,sc7180";
+};
new file mode 100644
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/ {
+ model = "Google Pompom (rev1)";
+ compatible = "google,pompom-rev1", "qcom,sc7180";
+};
+
+&pp3300_hub {
+ /* pp3300_l7c is used to power the USB hub */
+ /delete-property/regulator-always-on;
+ /delete-property/regulator-boot-on;
+};
+
+&pp3300_l7c {
+ regulator-always-on;
+ regulator-boot-on;
+};
new file mode 100644
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r2.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pompom (rev2+) with LTE";
+ compatible = "google,pompom-sku0", "qcom,sc7180";
+};
new file mode 100644
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/ {
+ model = "Google Pompom (rev2+)";
+ compatible = "google,pompom", "qcom,sc7180";
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
new file mode 100644
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+ thermal-zones {
+ 5v-choke-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <250>;
+
+ thermal-sensors = <&pm6150_adc_tm 0>;
+
+ trips {
+ 5v-choke-crit {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+&alc5682 {
+ realtek,dmic-clk-driving-high = "true";
+};
+
+&cpu6_alert0 {
+ temperature = <60000>;
+};
+
+&cpu6_alert1 {
+ temperature = <65000>;
+};
+
+&cpu6_thermal {
+ sustainable-power = <948>;
+};
+
+&cpu7_alert0 {
+ temperature = <60000>;
+};
+
+&cpu7_alert1 {
+ temperature = <65000>;
+};
+
+&cpu7_thermal {
+ sustainable-power = <948>;
+};
+
+&cpu8_alert0 {
+ temperature = <60000>;
+};
+
+&cpu8_alert1 {
+ temperature = <65000>;
+};
+
+&cpu8_thermal {
+ sustainable-power = <948>;
+};
+
+&cpu9_alert0 {
+ temperature = <60000>;
+};
+
+&cpu9_alert1 {
+ temperature = <65000>;
+};
+
+&cpu9_thermal {
+ sustainable-power = <948>;
+};
+
+&gpio_keys {
+ status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ post-power-on-delay-ms = <20>;
+ hid-descr-addr = <0x0001>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+&panel {
+ compatible = "kingdisplay,kd116n21-30nv-a010";
+};
+
+&pen_insert {
+ /* Insert = high, eject = low */
+ gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+};
+
+&pm6150_adc {
+ 5v-choke-thermistor@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm6150_adc_tm {
+ status = "okay";
+
+ 5v-choke-thermistor@0 {
+ reg = <0>;
+ io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+};
+
+&usb_c1 {
+ status = "disabled";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_POMPOM";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "TP_INT_ODL",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "",
+ "EN_PP3300_DX_EDP",
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "PEN_PDCT_L",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "",
+ "AP_SPI_CS0_L",
+ "SD_CD_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "EN_PP3300_CODEC",
+ "EN_PP3300_HUB",
+ "",
+ "DMIC_SEL",
+ "",
+ "",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_R_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ dmic_sel: dmic-sel {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ bias-pull-down;
+ };
+ };
+};
This is a trogdor variant. This is mostly a grab from the downstream tree with notable exceptions: - I skip -rev0. This was a super early build and there's no advantage of long term support. - In -rev1 I translate the handling of the USB hub like is done for similar boards. See the difference between the downstream and upstream 'sc7180-trogdor-lazor-r0.dts' for an example. This will need to be resolved when proper support for the USB hub is figured out upstream. - I remove sound node since sound hasn't landed upstream yet. - In incorporate the pending <https://crrev.com/c/2719075> for the keyboard. Cc: Philip Chen <philipchen@google.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Tzung-Bi Shih <tzungbi@chromium.org> Cc: Judy Hsiao <judyhsiao@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> --- arch/arm64/boot/dts/qcom/Makefile | 4 + .../dts/qcom/sc7180-trogdor-pompom-r1-lte.dts | 14 + .../dts/qcom/sc7180-trogdor-pompom-r1.dts | 26 ++ .../dts/qcom/sc7180-trogdor-pompom-r2-lte.dts | 14 + .../dts/qcom/sc7180-trogdor-pompom-r2.dts | 44 +++ .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 288 ++++++++++++++++++ 6 files changed, 390 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi