@@ -15,6 +15,7 @@ obj-$(CONFIG_SCSI_UFS_CDNS_PLATFORM) += cdns-pltfrm.o
obj-$(CONFIG_SCSI_UFS_QCOM) += ufs_qcom.o
ufs_qcom-y += ufs-qcom.o
ufs_qcom-$(CONFIG_SCSI_UFS_CRYPTO) += ufs-qcom-ice.o
+ufs_qcom-$(CONFIG_ACPI) += ufs-qcom-phy.o
obj-$(CONFIG_SCSI_UFS_EXYNOS) += ufs-exynos.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
new file mode 100644
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <linux/iopoll.h>
+
+#include "ufshcd.h"
+
+/* Only for QMP V4 PHY - QSERDES COM registers */
+#define QSERDES_V4_COM_SSC_EN_CENTER 0x010
+#define QSERDES_V4_COM_SSC_PER1 0x01c
+#define QSERDES_V4_COM_SSC_PER2 0x020
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0 0x024
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0 0x028
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1 0x030
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1 0x034
+#define QSERDES_V4_COM_CLK_ENABLE1 0x048
+#define QSERDES_V4_COM_SYSCLK_BUF_ENABLE 0x050
+#define QSERDES_V4_COM_PLL_IVCO 0x058
+#define QSERDES_V4_COM_CMN_IPTRIM 0x060
+#define QSERDES_V4_COM_CP_CTRL_MODE0 0x074
+#define QSERDES_V4_COM_CP_CTRL_MODE1 0x078
+#define QSERDES_V4_COM_PLL_RCTRL_MODE0 0x07c
+#define QSERDES_V4_COM_PLL_RCTRL_MODE1 0x080
+#define QSERDES_V4_COM_PLL_CCTRL_MODE0 0x084
+#define QSERDES_V4_COM_PLL_CCTRL_MODE1 0x088
+#define QSERDES_V4_COM_SYSCLK_EN_SEL 0x094
+#define QSERDES_V4_COM_LOCK_CMP_EN 0x0a4
+#define QSERDES_V4_COM_LOCK_CMP1_MODE0 0x0ac
+#define QSERDES_V4_COM_LOCK_CMP2_MODE0 0x0b0
+#define QSERDES_V4_COM_LOCK_CMP1_MODE1 0x0b4
+#define QSERDES_V4_COM_DEC_START_MODE0 0x0bc
+#define QSERDES_V4_COM_LOCK_CMP2_MODE1 0x0b8
+#define QSERDES_V4_COM_DEC_START_MODE1 0x0c4
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE0 0x0cc
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE0 0x0d0
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE0 0x0d4
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE1 0x0d8
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE1 0x0dc
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE1 0x0e0
+#define QSERDES_V4_COM_VCO_TUNE_MAP 0x10c
+#define QSERDES_V4_COM_VCO_TUNE1_MODE0 0x110
+#define QSERDES_V4_COM_VCO_TUNE2_MODE0 0x114
+#define QSERDES_V4_COM_VCO_TUNE1_MODE1 0x118
+#define QSERDES_V4_COM_VCO_TUNE2_MODE1 0x11c
+#define QSERDES_V4_COM_VCO_TUNE_INITVAL2 0x124
+#define QSERDES_V4_COM_CLK_SELECT 0x154
+#define QSERDES_V4_COM_HSCLK_SEL 0x158
+#define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL 0x15c
+#define QSERDES_V4_COM_CORECLK_DIV_MODE1 0x16c
+#define QSERDES_V4_COM_SVS_MODE_CLK_SEL 0x184
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x1ac
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1b0
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x1b4
+#define QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL 0x1bc
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1b8
+
+/* Only for QMP V4 PHY - TX registers */
+#define QSERDES_V4_TX_RES_CODE_LANE_TX 0x34
+#define QSERDES_V4_TX_RES_CODE_LANE_RX 0x38
+#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX 0x3c
+#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 0x40
+#define QSERDES_V4_TX_LANE_MODE_1 0x84
+#define QSERDES_V4_TX_LANE_MODE_2 0x88
+#define QSERDES_V4_TX_RCV_DETECT_LVL_2 0x9c
+#define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8
+#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC
+#define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0xe0
+#define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0xe4
+#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8
+#define QSERDES_V4_TX_PI_QEC_CTRL 0x104
+
+/* Only for QMP V4 PHY - RX registers */
+#define QSERDES_V4_RX_UCDR_FO_GAIN 0x008
+#define QSERDES_V4_RX_UCDR_SO_GAIN 0x014
+#define QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN 0x030
+#define QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
+#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c
+#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040
+#define QSERDES_V4_RX_UCDR_PI_CONTROLS 0x044
+#define QSERDES_V4_RX_UCDR_PI_CTRL2 0x048
+#define QSERDES_V4_RX_UCDR_SB2_THRESH1 0x04c
+#define QSERDES_V4_RX_UCDR_SB2_THRESH2 0x050
+#define QSERDES_V4_RX_UCDR_SB2_GAIN1 0x054
+#define QSERDES_V4_RX_UCDR_SB2_GAIN2 0x058
+#define QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE 0x060
+#define QSERDES_V4_RX_RCLK_AUXDATA_SEL 0x064
+#define QSERDES_V4_RX_AC_JTAG_ENABLE 0x068
+#define QSERDES_V4_RX_AC_JTAG_MODE 0x078
+#define QSERDES_V4_RX_RX_TERM_BW 0x080
+#define QSERDES_V4_RX_VGA_CAL_CNTRL1 0x0d4
+#define QSERDES_V4_RX_VGA_CAL_CNTRL2 0x0d8
+#define QSERDES_V4_RX_GM_CAL 0x0dc
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1 0x0e8
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2 0x0ec
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3 0x0f0
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4 0x0f4
+#define QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW 0x0f8
+#define QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH 0x0fc
+#define QSERDES_V4_RX_RX_IDAC_MEASURE_TIME 0x100
+#define QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
+#define QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x114
+#define QSERDES_V4_RX_SIGDET_ENABLES 0x118
+#define QSERDES_V4_RX_SIGDET_CNTRL 0x11c
+#define QSERDES_V4_RX_SIGDET_LVL 0x120
+#define QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL 0x124
+#define QSERDES_V4_RX_RX_BAND 0x128
+#define QSERDES_V4_RX_RX_MODE_00_LOW 0x170
+#define QSERDES_V4_RX_RX_MODE_00_HIGH 0x174
+#define QSERDES_V4_RX_RX_MODE_00_HIGH2 0x178
+#define QSERDES_V4_RX_RX_MODE_00_HIGH3 0x17c
+#define QSERDES_V4_RX_RX_MODE_00_HIGH4 0x180
+#define QSERDES_V4_RX_RX_MODE_01_LOW 0x184
+#define QSERDES_V4_RX_RX_MODE_01_HIGH 0x188
+#define QSERDES_V4_RX_RX_MODE_01_HIGH2 0x18c
+#define QSERDES_V4_RX_RX_MODE_01_HIGH3 0x190
+#define QSERDES_V4_RX_RX_MODE_01_HIGH4 0x194
+#define QSERDES_V4_RX_RX_MODE_10_LOW 0x198
+#define QSERDES_V4_RX_RX_MODE_10_HIGH 0x19c
+#define QSERDES_V4_RX_RX_MODE_10_HIGH2 0x1a0
+#define QSERDES_V4_RX_RX_MODE_10_HIGH3 0x1a4
+#define QSERDES_V4_RX_RX_MODE_10_HIGH4 0x1a8
+#define QSERDES_V4_RX_DFE_EN_TIMER 0x1b4
+#define QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET 0x1b8
+#define QSERDES_V4_RX_DCC_CTRL1 0x1bc
+#define QSERDES_V4_RX_VTH_CODE 0x1c4
+
+/* Only for QMP V4 PHY - UFS PCS registers */
+#define QPHY_V4_PCS_UFS_PHY_START 0x000
+#define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL 0x004
+#define QPHY_V4_PCS_UFS_SW_RESET 0x008
+#define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c
+#define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010
+#define QPHY_V4_PCS_UFS_PLL_CNTL 0x02c
+#define QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030
+#define QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038
+#define QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060
+#define QPHY_V4_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074
+#define QPHY_V4_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0b4
+#define QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL 0x124
+#define QPHY_V4_PCS_UFS_LINECFG_DISABLE 0x148
+#define QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME 0x150
+#define QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2 0x158
+#define QPHY_V4_PCS_UFS_TX_PWM_GEAR_BAND 0x160
+#define QPHY_V4_PCS_UFS_TX_HS_GEAR_BAND 0x168
+#define QPHY_V4_PCS_UFS_READY_STATUS 0x180
+#define QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1 0x1d8
+#define QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1 0x1e0
+
+struct ufsphy_init_tbl {
+ unsigned int offset;
+ unsigned int val;
+};
+
+static const struct ufsphy_init_tbl ufsphy_serdes_tbl[] = {
+ { QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9 },
+ { QSERDES_V4_COM_HSCLK_SEL, 0x11 },
+ { QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00 },
+ { QSERDES_V4_COM_LOCK_CMP_EN, 0x01 },
+ { QSERDES_V4_COM_VCO_TUNE_MAP, 0x02 },
+ { QSERDES_V4_COM_PLL_IVCO, 0x0f },
+ { QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00 },
+ { QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11 },
+ { QSERDES_V4_COM_DEC_START_MODE0, 0x82 },
+ { QSERDES_V4_COM_CP_CTRL_MODE0, 0x06 },
+ { QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16 },
+ { QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36 },
+ { QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff },
+ { QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c },
+ { QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac },
+ { QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e },
+ { QSERDES_V4_COM_DEC_START_MODE1, 0x98 },
+ { QSERDES_V4_COM_CP_CTRL_MODE1, 0x06 },
+ { QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16 },
+ { QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36 },
+ { QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32 },
+ { QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f },
+ { QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd },
+ { QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23 },
+ /* Rate B */
+ { QSERDES_V4_COM_VCO_TUNE_MAP, 0x06 },
+};
+
+static const struct ufsphy_init_tbl ufsphy_tx_tbl[] = {
+ { QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06 },
+ { QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03 },
+ { QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01 },
+ { QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00 },
+ { QSERDES_V4_TX_LANE_MODE_1, 0x05 },
+ { QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c },
+};
+
+static const struct ufsphy_init_tbl ufsphy_rx_tbl[] = {
+ { QSERDES_V4_RX_SIGDET_LVL, 0x24 },
+ { QSERDES_V4_RX_SIGDET_CNTRL, 0x0f },
+ { QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e },
+ { QSERDES_V4_RX_RX_BAND, 0x18 },
+ { QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a },
+ { QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b },
+ { QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1 },
+ { QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80 },
+ { QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80 },
+ { QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c },
+ { QSERDES_V4_RX_UCDR_SO_GAIN, 0x04 },
+ { QSERDES_V4_RX_RX_TERM_BW, 0x1b },
+ { QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06 },
+ { QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04 },
+ { QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d },
+ { QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00 },
+ { QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10 },
+ { QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0 },
+ { QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00 },
+ { QSERDES_V4_RX_RX_MODE_00_LOW, 0x36 },
+ { QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36 },
+ { QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6 },
+ { QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b },
+ { QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d },
+ { QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0 },
+ { QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8 },
+ { QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8 },
+ { QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b },
+ { QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1 },
+ { QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0 },
+ { QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8 },
+ { QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8 },
+ { QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b },
+ { QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1 },
+};
+
+static const struct ufsphy_init_tbl ufsphy_pcs_tbl[] = {
+ { QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d },
+ { QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a },
+ { QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02 },
+ { QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43 },
+ { QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f },
+ { QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff },
+ { QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02 },
+};
+
+#define UFSPHY_SERDES_OFFSET 0x3000
+#define UFSPHY_TX_OFFSET 0x3400
+#define UFSPHY_RX_OFFSET 0x3600
+#define UFSPHY_TX2_OFFSET 0x3800
+#define UFSPHY_RX2_OFFSET 0x3a00
+#define UFSPHY_PCS_OFFSET 0x3c00
+
+#define SW_RESET BIT(0)
+#define SW_PWRDN BIT(0)
+#define SERDES_START BIT(0)
+#define PCS_READY BIT(0)
+
+#define GCC_UFS_PHY_BCR_ADDR 0x177000
+#define BCR_RESET BIT(0)
+
+#define PHY_INIT_COMPLETE_TIMEOUT 10000
+
+static int ufs_qcom_phy_reset(void)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = ioremap(GCC_UFS_PHY_BCR_ADDR, 4);
+ if (!reg)
+ return -ENOMEM;
+
+ /* assert */
+ val = readl(reg);
+ val |= BCR_RESET;
+ writel(val, reg);
+
+ /*
+ * The hardware requirement for delay between assert/deassert
+ * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
+ * ~125us (4/32768). To be on the safe side add 200us delay.
+ */
+ usleep_range(200, 210);
+
+ /* deassert */
+ val = readl(reg);
+ val &= ~BCR_RESET;
+ writel(val, reg);
+
+ usleep_range(1000, 1100);
+
+ iounmap(reg);
+ return 0;
+}
+
+static void ufsphy_configure_hw(void __iomem *base,
+ const struct ufsphy_init_tbl tbl[], int num)
+{
+ const struct ufsphy_init_tbl *t = tbl;
+ int i;
+
+ for (i = 0; i < num; i++, t++)
+ writel(t->val, base + t->offset);
+}
+
+int ufs_qcom_phy_init(struct ufs_hba *hba)
+{
+ void __iomem *pcs = hba->mmio_base + UFSPHY_PCS_OFFSET;
+ u32 val;
+ int ret;
+
+ ret = ufs_qcom_phy_reset();
+ if (ret)
+ return ret;
+
+ val = readl(pcs + QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL);
+ val |= SW_PWRDN;
+ writel(val, pcs + QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL);
+
+ ufsphy_configure_hw(hba->mmio_base + UFSPHY_SERDES_OFFSET,
+ ufsphy_serdes_tbl, ARRAY_SIZE(ufsphy_serdes_tbl));
+ ufsphy_configure_hw(hba->mmio_base + UFSPHY_TX_OFFSET,
+ ufsphy_tx_tbl, ARRAY_SIZE(ufsphy_tx_tbl));
+ ufsphy_configure_hw(hba->mmio_base + UFSPHY_TX2_OFFSET,
+ ufsphy_tx_tbl, ARRAY_SIZE(ufsphy_tx_tbl));
+ ufsphy_configure_hw(hba->mmio_base + UFSPHY_RX_OFFSET,
+ ufsphy_rx_tbl, ARRAY_SIZE(ufsphy_rx_tbl));
+ ufsphy_configure_hw(hba->mmio_base + UFSPHY_RX2_OFFSET,
+ ufsphy_rx_tbl, ARRAY_SIZE(ufsphy_rx_tbl));
+ ufsphy_configure_hw(pcs, ufsphy_pcs_tbl, ARRAY_SIZE(ufsphy_pcs_tbl));
+
+ /*
+ * Pull out PHY from POWER DOWN state.
+ * This is active low enable signal to power-down PHY.
+ */
+ /* Pull PHY out of reset state */
+ val = readl(pcs + QPHY_V4_PCS_UFS_SW_RESET);
+ val &= ~SW_RESET;
+ writel(val, pcs + QPHY_V4_PCS_UFS_SW_RESET);
+
+ /* Start SerDes and Phy-Coding-Sublayer */
+ val = readl(pcs + QPHY_V4_PCS_UFS_PHY_START);
+ val |= SERDES_START;
+ writel(val, pcs + QPHY_V4_PCS_UFS_PHY_START);
+
+ ret = readl_poll_timeout(pcs + QPHY_V4_PCS_UFS_READY_STATUS,
+ val, (val & PCS_READY) == PCS_READY,
+ 10, PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(hba->dev, "ufsphy initialization timed-out\n");
+ return ret;
+ }
+
+ return 0;
+}
@@ -292,6 +292,10 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
? true : false;
+ if (has_acpi_companion(hba->dev) &&
+ hba->ufs_version == UFSHCI_VERSION_30)
+ return ufs_qcom_phy_init(hba);
+
/* Reset UFS Host Controller and PHY */
ret = ufs_qcom_host_reset(hba);
if (ret)
@@ -269,4 +269,15 @@ static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
#define ufs_qcom_ice_program_key NULL
#endif /* !CONFIG_SCSI_UFS_CRYPTO */
+/* ufs-qcom-phy.c */
+
+#ifdef CONFIG_ACPI
+int ufs_qcom_phy_init(struct ufs_hba *hba);
+#else
+static inline int ufs_qcom_phy_init(struct ufs_hba *hba)
+{
+ return 0;
+}
+#endif
+
#endif /* UFS_QCOM_H_ */
@@ -80,6 +80,7 @@ enum {
UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */
+ UFSHCI_VERSION_30 = 0x00000300, /* 3.0 */
};
/*
When booting Lenovo Flex 5G laptop (powered by Qualcomm SC8180x SoC) from ACPI, UFS is not working, because the generic QMP PHY driver that takes care of UFS PHY init only works with DT. It adds a specialized PHY init function to get UFS work with ACPI boot on this platform, where UFS 3.0 and QMP V4 PHY is combined to support UFS. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/scsi/ufs/Makefile | 1 + drivers/scsi/ufs/ufs-qcom-phy.c | 349 ++++++++++++++++++++++++++++++++ drivers/scsi/ufs/ufs-qcom.c | 4 + drivers/scsi/ufs/ufs-qcom.h | 11 + drivers/scsi/ufs/ufshci.h | 1 + 5 files changed, 366 insertions(+) create mode 100644 drivers/scsi/ufs/ufs-qcom-phy.c