diff mbox series

[v1,1/1] i2c: drivers: Use generic definitions for bus frequencies (part 2)

Message ID 20210322165405.44980-1-andriy.shevchenko@linux.intel.com (mailing list archive)
State Superseded
Headers show
Series [v1,1/1] i2c: drivers: Use generic definitions for bus frequencies (part 2) | expand

Commit Message

Andy Shevchenko March 22, 2021, 4:54 p.m. UTC
Since we have generic definitions for bus frequencies, let's use them.

Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-mlxbf.c    | 14 ++++----------
 drivers/i2c/busses/i2c-qcom-cci.c |  4 ++--
 2 files changed, 6 insertions(+), 12 deletions(-)

Comments

Khalil Blaiech March 22, 2021, 11:05 p.m. UTC | #1
Thanks.
Acked-by: Khalil Blaiech <kblaiech@nvidia.com>

> -----Original Message-----
> From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Sent: Monday, March 22, 2021 12:54 PM
> To: Wolfram Sang <wsa@kernel.org>; Khalil Blaiech <kblaiech@nvidia.com>;
> Loic Poulain <loic.poulain@linaro.org>; linux-i2c@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-arm-msm@vger.kernel.org
> Cc: Robert Foss <robert.foss@linaro.org>; Andy Shevchenko
> <andriy.shevchenko@linux.intel.com>; Wolfram Sang <wsa@the-
> dreams.de>
> Subject: [PATCH v1 1/1] i2c: drivers: Use generic definitions for bus
> frequencies (part 2)
> 
> Since we have generic definitions for bus frequencies, let's use them.
> 
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/i2c/busses/i2c-mlxbf.c    | 14 ++++----------
>  drivers/i2c/busses/i2c-qcom-cci.c |  4 ++--
>  2 files changed, 6 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
> index 2fb0532d8a16..80ab831df349 100644
> --- a/drivers/i2c/busses/i2c-mlxbf.c
> +++ b/drivers/i2c/busses/i2c-mlxbf.c
> @@ -172,12 +172,6 @@
>  #define MLXBF_I2C_SMBUS_THIGH_MAX_TBUF            0x14
>  #define MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT           0x18
> 
> -enum {
> -	MLXBF_I2C_TIMING_100KHZ = 100000,
> -	MLXBF_I2C_TIMING_400KHZ = 400000,
> -	MLXBF_I2C_TIMING_1000KHZ = 1000000,
> -};
> -
>  /*
>   * Defines SMBus operating frequency and core clock frequency.
>   * According to ADB files, default values are compliant to 100KHz SMBus
> @@ -1202,7 +1196,7 @@ static int mlxbf_i2c_init_timings(struct
> platform_device *pdev,
> 
>  	ret = device_property_read_u32(dev, "clock-frequency",
> &config_khz);
>  	if (ret < 0)
> -		config_khz = MLXBF_I2C_TIMING_100KHZ;
> +		config_khz = I2C_MAX_STANDARD_MODE_FREQ;
> 
>  	switch (config_khz) {
>  	default:
> @@ -1210,15 +1204,15 @@ static int mlxbf_i2c_init_timings(struct
> platform_device *pdev,
>  		pr_warn("Illegal value %d: defaulting to 100 KHz\n",
>  			config_khz);
>  		fallthrough;
> -	case MLXBF_I2C_TIMING_100KHZ:
> +	case I2C_MAX_STANDARD_MODE_FREQ:
>  		config_idx = MLXBF_I2C_TIMING_CONFIG_100KHZ;
>  		break;
> 
> -	case MLXBF_I2C_TIMING_400KHZ:
> +	case I2C_MAX_FAST_MODE_FREQ:
>  		config_idx = MLXBF_I2C_TIMING_CONFIG_400KHZ;
>  		break;
> 
> -	case MLXBF_I2C_TIMING_1000KHZ:
> +	case I2C_MAX_FAST_MODE_PLUS_FREQ:
>  		config_idx = MLXBF_I2C_TIMING_CONFIG_1000KHZ;
>  		break;
>  	}
> diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-
> cci.c
> index 1c259b5188de..c63d5545fc2a 100644
> --- a/drivers/i2c/busses/i2c-qcom-cci.c
> +++ b/drivers/i2c/busses/i2c-qcom-cci.c
> @@ -569,9 +569,9 @@ static int cci_probe(struct platform_device *pdev)
>  		cci->master[idx].mode = I2C_MODE_STANDARD;
>  		ret = of_property_read_u32(child, "clock-frequency", &val);
>  		if (!ret) {
> -			if (val == 400000)
> +			if (val == I2C_MAX_FAST_MODE_FREQ)
>  				cci->master[idx].mode = I2C_MODE_FAST;
> -			else if (val == 1000000)
> +			else if (val == I2C_MAX_FAST_MODE_PLUS_FREQ)
>  				cci->master[idx].mode =
> I2C_MODE_FAST_PLUS;
>  		}
> 
> --
> 2.30.2
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
index 2fb0532d8a16..80ab831df349 100644
--- a/drivers/i2c/busses/i2c-mlxbf.c
+++ b/drivers/i2c/busses/i2c-mlxbf.c
@@ -172,12 +172,6 @@ 
 #define MLXBF_I2C_SMBUS_THIGH_MAX_TBUF            0x14
 #define MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT           0x18
 
-enum {
-	MLXBF_I2C_TIMING_100KHZ = 100000,
-	MLXBF_I2C_TIMING_400KHZ = 400000,
-	MLXBF_I2C_TIMING_1000KHZ = 1000000,
-};
-
 /*
  * Defines SMBus operating frequency and core clock frequency.
  * According to ADB files, default values are compliant to 100KHz SMBus
@@ -1202,7 +1196,7 @@  static int mlxbf_i2c_init_timings(struct platform_device *pdev,
 
 	ret = device_property_read_u32(dev, "clock-frequency", &config_khz);
 	if (ret < 0)
-		config_khz = MLXBF_I2C_TIMING_100KHZ;
+		config_khz = I2C_MAX_STANDARD_MODE_FREQ;
 
 	switch (config_khz) {
 	default:
@@ -1210,15 +1204,15 @@  static int mlxbf_i2c_init_timings(struct platform_device *pdev,
 		pr_warn("Illegal value %d: defaulting to 100 KHz\n",
 			config_khz);
 		fallthrough;
-	case MLXBF_I2C_TIMING_100KHZ:
+	case I2C_MAX_STANDARD_MODE_FREQ:
 		config_idx = MLXBF_I2C_TIMING_CONFIG_100KHZ;
 		break;
 
-	case MLXBF_I2C_TIMING_400KHZ:
+	case I2C_MAX_FAST_MODE_FREQ:
 		config_idx = MLXBF_I2C_TIMING_CONFIG_400KHZ;
 		break;
 
-	case MLXBF_I2C_TIMING_1000KHZ:
+	case I2C_MAX_FAST_MODE_PLUS_FREQ:
 		config_idx = MLXBF_I2C_TIMING_CONFIG_1000KHZ;
 		break;
 	}
diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
index 1c259b5188de..c63d5545fc2a 100644
--- a/drivers/i2c/busses/i2c-qcom-cci.c
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -569,9 +569,9 @@  static int cci_probe(struct platform_device *pdev)
 		cci->master[idx].mode = I2C_MODE_STANDARD;
 		ret = of_property_read_u32(child, "clock-frequency", &val);
 		if (!ret) {
-			if (val == 400000)
+			if (val == I2C_MAX_FAST_MODE_FREQ)
 				cci->master[idx].mode = I2C_MODE_FAST;
-			else if (val == 1000000)
+			else if (val == I2C_MAX_FAST_MODE_PLUS_FREQ)
 				cci->master[idx].mode = I2C_MODE_FAST_PLUS;
 		}