Message ID | 20210429014226.21017-1-jarvis.w.jiang@gmail.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | [v2] bus: mhi: pci_generic: T99W175: update channel name from AT to DUN | expand |
Hi Mani, Hemant, On Thu, 29 Apr 2021 at 03:44, Jarvis Jiang <jarvis.w.jiang@gmail.com> wrote: > > According to MHI v1.1 specification, change the channel name of T99W175 > from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, > so that the channels can be bound to the Qcom WWAN control driver, and > device node such as /dev/wwan0p3AT will be generated, which is very useful > for debugging modem > > Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") > Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Should be considered for 5.13-rc* since to properly fix the issue. Thanks, Loic > --- > > v2: Add: Fixes: aac426562f56 > > drivers/bus/mhi/pci_generic.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c > index 7c810f02a2ef..8c7f6576e421 100644 > --- a/drivers/bus/mhi/pci_generic.c > +++ b/drivers/bus/mhi/pci_generic.c > @@ -311,8 +311,8 @@ static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = { > MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1), > MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0), > MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0), > - MHI_CHANNEL_CONFIG_UL(32, "AT", 32, 0), > - MHI_CHANNEL_CONFIG_DL(33, "AT", 32, 0), > + MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), > + MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), > MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2), > MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3), > }; > -- > 2.25.1 >
On Wed, Apr 28, 2021 at 06:42:26PM -0700, Jarvis Jiang wrote: > According to MHI v1.1 specification, change the channel name of T99W175 > from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, > so that the channels can be bound to the Qcom WWAN control driver, and > device node such as /dev/wwan0p3AT will be generated, which is very useful > for debugging modem > > Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") > Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > > v2: Add: Fixes: aac426562f56 > > drivers/bus/mhi/pci_generic.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c > index 7c810f02a2ef..8c7f6576e421 100644 > --- a/drivers/bus/mhi/pci_generic.c > +++ b/drivers/bus/mhi/pci_generic.c > @@ -311,8 +311,8 @@ static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = { > MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1), > MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0), > MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0), > - MHI_CHANNEL_CONFIG_UL(32, "AT", 32, 0), > - MHI_CHANNEL_CONFIG_DL(33, "AT", 32, 0), > + MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), > + MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), > MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2), > MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3), > }; > -- > 2.25.1 >
On Wed, Apr 28, 2021 at 06:42:26PM -0700, Jarvis Jiang wrote: > According to MHI v1.1 specification, change the channel name of T99W175 > from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, > so that the channels can be bound to the Qcom WWAN control driver, and > device node such as /dev/wwan0p3AT will be generated, which is very useful > for debugging modem > > Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") > Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Applied to mhi-fixes! Thanks, Mani > --- > > v2: Add: Fixes: aac426562f56 > > drivers/bus/mhi/pci_generic.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c > index 7c810f02a2ef..8c7f6576e421 100644 > --- a/drivers/bus/mhi/pci_generic.c > +++ b/drivers/bus/mhi/pci_generic.c > @@ -311,8 +311,8 @@ static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = { > MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1), > MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0), > MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0), > - MHI_CHANNEL_CONFIG_UL(32, "AT", 32, 0), > - MHI_CHANNEL_CONFIG_DL(33, "AT", 32, 0), > + MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), > + MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), > MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2), > MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3), > }; > -- > 2.25.1 >
diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c index 7c810f02a2ef..8c7f6576e421 100644 --- a/drivers/bus/mhi/pci_generic.c +++ b/drivers/bus/mhi/pci_generic.c @@ -311,8 +311,8 @@ static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = { MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1), MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0), MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0), - MHI_CHANNEL_CONFIG_UL(32, "AT", 32, 0), - MHI_CHANNEL_CONFIG_DL(33, "AT", 32, 0), + MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), + MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2), MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3), };
According to MHI v1.1 specification, change the channel name of T99W175 from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, so that the channels can be bound to the Qcom WWAN control driver, and device node such as /dev/wwan0p3AT will be generated, which is very useful for debugging modem Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> --- v2: Add: Fixes: aac426562f56 drivers/bus/mhi/pci_generic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)