[v9,5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub

Commit Message

Matthias Kaehlcke May 3, 2021, 7:44 p.m. UTC

Add nodes for the onboard USB hub on trogdor devices. Remove the
'always-on' and 'boot-on' properties from the hub regulator, since
the regulator is now managed by the onboard_usb_hub driver.

Signed-off-by: Matthias Kaehlcke <[e-mail]>
---

Changes in v9:
- none

Changes in v8:
- none

Changes in v7:
- rebased on qcom/arm64-for-5.13 (with the rest of the series)

Changes in v6:
- added 'companion-hub' entry to both USB devices
- added 'vdd-supply' also to hub@2

Changes in v5:
- patch added to the series

 .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 19 +++++++----------
 .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 11 ++++------
 .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 19 +++++++----------
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi  | 21 ++++++++++++++++---
 4 files changed, 38 insertions(+), 32 deletions(-)

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index 5c997cd90069..bae85f6b2bfa 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -23,17 +23,6 @@  &charger_thermal {
 	status = "disabled";
 };
 
-&pp3300_hub {
-	/* pp3300_l7c is used to power the USB hub */
-	/delete-property/regulator-always-on;
-	/delete-property/regulator-boot-on;
-};
-
-&pp3300_l7c {
-	regulator-always-on;
-	regulator-boot-on;
-};
-
 &sn65dsi86_out {
 	/*
 	 * Lane 0 was incorrectly mapped on the cable, but we've now decided
@@ -42,3 +31,11 @@  &sn65dsi86_out {
 	 */
 	lane-polarities = <1 0>;
 };
+
+&usb_hub_2_0 {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_0 {
+	 vdd-supply = <&pp3300_l7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index d9fbcc7bc5bd..45f014c3539d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -23,13 +23,10 @@  &charger_thermal {
 	status = "disabled";
 };
 
-&pp3300_hub {
-	/* pp3300_l7c is used to power the USB hub */
-	/delete-property/regulator-always-on;
-	/delete-property/regulator-boot-on;
+&usb_hub_2_0 {
+	 vdd-supply = <&pp3300_l7c>;
 };
 
-&pp3300_l7c {
-	regulator-always-on;
-	regulator-boot-on;
+&usb_hub_3_0 {
+	 vdd-supply = <&pp3300_l7c>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 2b522f9e0d8f..2f5263e3d1b9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -42,17 +42,6 @@  &panel {
 	compatible = "auo,b116xa01";
 };
 
-&pp3300_hub {
-	/* pp3300_l7c is used to power the USB hub */
-	/delete-property/regulator-always-on;
-	/delete-property/regulator-boot-on;
-};
-
-&pp3300_l7c {
-	regulator-always-on;
-	regulator-boot-on;
-};
-
 &sdhc_2 {
 	status = "okay";
 };
@@ -61,6 +50,14 @@  &trackpad {
 	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
 };
 
+&usb_hub_2_0 {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_0 {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &trackpad_int_1v8_odl {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 192e2e424fde..54f9da9af376 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -206,9 +206,6 @@  pp3300_hub: pp3300-hub {
 		pinctrl-names = "default";
 		pinctrl-0 = <&en_pp3300_hub>;
 
-		regulator-always-on;
-		regulator-boot-on;
-
 		vin-supply = <&pp3300_a>;
 	};
 
@@ -848,6 +845,24 @@  &usb_1 {
 
 &usb_1_dwc3 {
 	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	usb_hub_2_0: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&pp3300_hub>;
+		companion-hub = <&usb_hub_3_0>;
+	};
+
+	/* 3.0 hub on port 2 */
+	usb_hub_3_0: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&pp3300_hub>;
+		companion-hub = <&usb_hub_2_0>;
+	};
 };
 
 &usb_1_hsphy {