| Message ID | 20210519143700.27392-5-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Enable Qualcomm Crypto Engine on sm8250 | expand |
On Wed, May 19, 2021 at 08:06:47PM +0530, Bhupesh Sharma wrote: > Convert Qualcomm QCE crypto devicetree binding to YAML. > > Cc: Thara Gopinath <thara.gopinath@linaro.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Andy Gross <agross@kernel.org> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: David S. Miller <davem@davemloft.net> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: dmaengine@vger.kernel.org > Cc: linux-clk@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: bhupesh.linux@gmail.com > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > .../devicetree/bindings/crypto/qcom-qce.txt | 25 ------- > .../devicetree/bindings/crypto/qcom-qce.yaml | 69 +++++++++++++++++++ > 2 files changed, 69 insertions(+), 25 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt > create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml > > diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt > deleted file mode 100644 > index fdd53b184ba8..000000000000 > --- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt > +++ /dev/null > @@ -1,25 +0,0 @@ > -Qualcomm crypto engine driver > - > -Required properties: > - > -- compatible : should be "qcom,crypto-v5.1" > -- reg : specifies base physical address and size of the registers map > -- clocks : phandle to clock-controller plus clock-specifier pair > -- clock-names : "iface" clocks register interface > - "bus" clocks data transfer interface > - "core" clocks rest of the crypto block > -- dmas : DMA specifiers for tx and rx dma channels. For more see > - Documentation/devicetree/bindings/dma/dma.txt > -- dma-names : DMA request names should be "rx" and "tx" > - > -Example: > - crypto@fd45a000 { > - compatible = "qcom,crypto-v5.1"; > - reg = <0xfd45a000 0x6000>; > - clocks = <&gcc GCC_CE2_AHB_CLK>, > - <&gcc GCC_CE2_AXI_CLK>, > - <&gcc GCC_CE2_CLK>; > - clock-names = "iface", "bus", "core"; > - dmas = <&cryptobam 2>, <&cryptobam 3>; > - dma-names = "rx", "tx"; > - }; > diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml > new file mode 100644 > index 000000000000..a691cd08f372 > --- /dev/null > +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml > @@ -0,0 +1,69 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm crypto engine driver > + > +maintainers: > + - Bhupesh Sharma <bhupesh.sharma@linaro.org> > + > +description: | > + This document defines the binding for the QCE crypto > + controller found on Qualcomm parts. > + > +properties: > + compatible: > + const: qcom,crypto-v5.1 > + > + reg: > + maxItems: 1 > + description: | > + Specifies base physical address and size of the registers map. Yep, that's every 'reg'. Drop. With that dropped, Reviewed-by: Rob Herring <robh@kernel.org> > + > + clocks: > + items: > + - description: iface clocks register interface. > + - description: bus clocks data transfer interface. > + - description: core clocks rest of the crypto block. > + > + clock-names: > + items: > + - const: iface > + - const: bus > + - const: core > + > + dmas: > + items: > + - description: DMA specifiers for tx dma channel. > + - description: DMA specifiers for rx dma channel. > + > + dma-names: > + items: > + - const: rx > + - const: tx > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - dmas > + - dma-names > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,gcc-apq8084.h> > + crypto-engine@fd45a000 { > + compatible = "qcom,crypto-v5.1"; > + reg = <0xfd45a000 0x6000>; > + clocks = <&gcc GCC_CE2_AHB_CLK>, > + <&gcc GCC_CE2_AXI_CLK>, > + <&gcc GCC_CE2_CLK>; > + clock-names = "iface", "bus", "core"; > + dmas = <&cryptobam 2>, <&cryptobam 3>; > + dma-names = "rx", "tx"; > + }; > -- > 2.31.1 >
Hi Rob, On Fri, 21 May 2021 at 07:15, Rob Herring <robh@kernel.org> wrote: > > On Wed, May 19, 2021 at 08:06:47PM +0530, Bhupesh Sharma wrote: > > Convert Qualcomm QCE crypto devicetree binding to YAML. > > > > Cc: Thara Gopinath <thara.gopinath@linaro.org> > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Andy Gross <agross@kernel.org> > > Cc: Herbert Xu <herbert@gondor.apana.org.au> > > Cc: David S. Miller <davem@davemloft.net> > > Cc: Stephen Boyd <sboyd@kernel.org> > > Cc: Michael Turquette <mturquette@baylibre.com> > > Cc: Vinod Koul <vkoul@kernel.org> > > Cc: dmaengine@vger.kernel.org > > Cc: linux-clk@vger.kernel.org > > Cc: linux-crypto@vger.kernel.org > > Cc: devicetree@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > Cc: bhupesh.linux@gmail.com > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > .../devicetree/bindings/crypto/qcom-qce.txt | 25 ------- > > .../devicetree/bindings/crypto/qcom-qce.yaml | 69 +++++++++++++++++++ > > 2 files changed, 69 insertions(+), 25 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt > > create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml > > > > diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt > > deleted file mode 100644 > > index fdd53b184ba8..000000000000 > > --- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt > > +++ /dev/null > > @@ -1,25 +0,0 @@ > > -Qualcomm crypto engine driver > > - > > -Required properties: > > - > > -- compatible : should be "qcom,crypto-v5.1" > > -- reg : specifies base physical address and size of the registers map > > -- clocks : phandle to clock-controller plus clock-specifier pair > > -- clock-names : "iface" clocks register interface > > - "bus" clocks data transfer interface > > - "core" clocks rest of the crypto block > > -- dmas : DMA specifiers for tx and rx dma channels. For more see > > - Documentation/devicetree/bindings/dma/dma.txt > > -- dma-names : DMA request names should be "rx" and "tx" > > - > > -Example: > > - crypto@fd45a000 { > > - compatible = "qcom,crypto-v5.1"; > > - reg = <0xfd45a000 0x6000>; > > - clocks = <&gcc GCC_CE2_AHB_CLK>, > > - <&gcc GCC_CE2_AXI_CLK>, > > - <&gcc GCC_CE2_CLK>; > > - clock-names = "iface", "bus", "core"; > > - dmas = <&cryptobam 2>, <&cryptobam 3>; > > - dma-names = "rx", "tx"; > > - }; > > diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml > > new file mode 100644 > > index 000000000000..a691cd08f372 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml > > @@ -0,0 +1,69 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm crypto engine driver > > + > > +maintainers: > > + - Bhupesh Sharma <bhupesh.sharma@linaro.org> > > + > > +description: | > > + This document defines the binding for the QCE crypto > > + controller found on Qualcomm parts. > > + > > +properties: > > + compatible: > > + const: qcom,crypto-v5.1 > > + > > + reg: > > + maxItems: 1 > > + description: | > > + Specifies base physical address and size of the registers map. > > Yep, that's every 'reg'. Drop. > > With that dropped, > > Reviewed-by: Rob Herring <robh@kernel.org> Ok, I will drop this in v4. Thanks, Bhupesh > > + > > + clocks: > > + items: > > + - description: iface clocks register interface. > > + - description: bus clocks data transfer interface. > > + - description: core clocks rest of the crypto block. > > + > > + clock-names: > > + items: > > + - const: iface > > + - const: bus > > + - const: core > > + > > + dmas: > > + items: > > + - description: DMA specifiers for tx dma channel. > > + - description: DMA specifiers for rx dma channel. > > + > > + dma-names: > > + items: > > + - const: rx > > + - const: tx > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - dmas > > + - dma-names > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/qcom,gcc-apq8084.h> > > + crypto-engine@fd45a000 { > > + compatible = "qcom,crypto-v5.1"; > > + reg = <0xfd45a000 0x6000>; > > + clocks = <&gcc GCC_CE2_AHB_CLK>, > > + <&gcc GCC_CE2_AXI_CLK>, > > + <&gcc GCC_CE2_CLK>; > > + clock-names = "iface", "bus", "core"; > > + dmas = <&cryptobam 2>, <&cryptobam 3>; > > + dma-names = "rx", "tx"; > > + }; > > -- > > 2.31.1 > >
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt deleted file mode 100644 index fdd53b184ba8..000000000000 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt +++ /dev/null @@ -1,25 +0,0 @@ -Qualcomm crypto engine driver - -Required properties: - -- compatible : should be "qcom,crypto-v5.1" -- reg : specifies base physical address and size of the registers map -- clocks : phandle to clock-controller plus clock-specifier pair -- clock-names : "iface" clocks register interface - "bus" clocks data transfer interface - "core" clocks rest of the crypto block -- dmas : DMA specifiers for tx and rx dma channels. For more see - Documentation/devicetree/bindings/dma/dma.txt -- dma-names : DMA request names should be "rx" and "tx" - -Example: - crypto@fd45a000 { - compatible = "qcom,crypto-v5.1"; - reg = <0xfd45a000 0x6000>; - clocks = <&gcc GCC_CE2_AHB_CLK>, - <&gcc GCC_CE2_AXI_CLK>, - <&gcc GCC_CE2_CLK>; - clock-names = "iface", "bus", "core"; - dmas = <&cryptobam 2>, <&cryptobam 3>; - dma-names = "rx", "tx"; - }; diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml new file mode 100644 index 000000000000..a691cd08f372 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm crypto engine driver + +maintainers: + - Bhupesh Sharma <bhupesh.sharma@linaro.org> + +description: | + This document defines the binding for the QCE crypto + controller found on Qualcomm parts. + +properties: + compatible: + const: qcom,crypto-v5.1 + + reg: + maxItems: 1 + description: | + Specifies base physical address and size of the registers map. + + clocks: + items: + - description: iface clocks register interface. + - description: bus clocks data transfer interface. + - description: core clocks rest of the crypto block. + + clock-names: + items: + - const: iface + - const: bus + - const: core + + dmas: + items: + - description: DMA specifiers for tx dma channel. + - description: DMA specifiers for rx dma channel. + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-apq8084.h> + crypto-engine@fd45a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0xfd45a000 0x6000>; + clocks = <&gcc GCC_CE2_AHB_CLK>, + <&gcc GCC_CE2_AXI_CLK>, + <&gcc GCC_CE2_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + };
Convert Qualcomm QCE crypto devicetree binding to YAML. Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: bhupesh.linux@gmail.com Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- .../devicetree/bindings/crypto/qcom-qce.txt | 25 ------- .../devicetree/bindings/crypto/qcom-qce.yaml | 69 +++++++++++++++++++ 2 files changed, 69 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml