@@ -567,10 +567,10 @@ frame@b128000 {
pcie1: pci@10000000 {
compatible = "qcom,pcie-ipq8074";
- reg = <0x10000000 0xf1d
- 0x10000f20 0xa8
- 0x00088000 0x2000
- 0x10100000 0x1000>;
+ reg = <0x10000000 0xf1d>,
+ <0x10000f20 0xa8>,
+ <0x00088000 0x2000>,
+ <0x10100000 0x1000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <1>;
@@ -629,10 +629,10 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
pcie0: pci@20000000 {
compatible = "qcom,pcie-ipq8074";
- reg = <0x20000000 0xf1d
- 0x20000f20 0xa8
- 0x00080000 0x2000
- 0x20100000 0x1000>;
+ reg = <0x20000000 0xf1d>,
+ <0x20000f20 0xa8>,
+ <0x00080000 0x2000>,
+ <0x20100000 0x1000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
Do not write the 'reg' of multiple groups of data into a uint32 array, use <> to separate them. Otherwise, the errors similar to the following will be reported by reg.yaml. arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:reg:0: \ [268435456, 3869, 268439328, 168, 557056, 8192, 269484032, 4096] is too long Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)