diff mbox series

[v1] arm64: dts: qcom: msm8916-alcatel-idol347: enable touchscreen

Message ID 20210528114345.543761-1-vincent.knecht@mailoo.org (mailing list archive)
State Accepted
Commit 15c5a08c8427ded579427908ee32ab946cb51f46
Headers show
Series [v1] arm64: dts: qcom: msm8916-alcatel-idol347: enable touchscreen | expand

Commit Message

Vincent Knecht May 28, 2021, 11:43 a.m. UTC 
Enable the MStar msg2638 touchscreen.

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
 .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

patchwork-bot+linux-arm-msm@kernel.org May 31, 2021, 9:50 p.m. UTC | #1 
Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

On Fri, 28 May 2021 13:43:45 +0200 you wrote:
> Enable the MStar msg2638 touchscreen.
> 
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
> ---
>  .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)

Here is the summary with links:
  - [v1] arm64: dts: qcom: msm8916-alcatel-idol347: enable touchscreen
    https://git.kernel.org/qcom/c/15c5a08c8427

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 540b1fa4b260..670bd1bebd73 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -45,6 +45,24 @@  &blsp1_uart2 {
 	status = "okay";
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	touchscreen@26 {
+		compatible = "mstar,msg2638";
+		reg = <0x26>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_reset_default>;
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+		touchscreen-size-x = <2048>;
+		touchscreen-size-y = <2048>;
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -281,6 +299,14 @@  proximity_int_default: proximity-int-default {
 		bias-pull-up;
 	};
 
+	ts_int_reset_default: ts-int-reset-default {
+		pins = "gpio13", "gpio100";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default {
 		pins = "gpio69";
 		function = "gpio";