| Message ID | 20210608152737.154218-1-konrad.dybcio@somainline.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,1/3] arm64: dts: qcom: Add PMI8996 DTSI file | expand |
diff --git a/arch/arm64/boot/dts/qcom/pmi8996.dtsi b/arch/arm64/boot/dts/qcom/pmi8996.dtsi new file mode 100644 index 000000000000..31b47209e261 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8996.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + + /* + * PMI8996 is a slight modification of PMI8994 with + * some notable changes, like being the first PMIC + * whose the bootloader has to check to continue booting + * and a change to a LABIBB parameter. + */ + +/ { + qcom,pmic-id = <0x20009 0x10013 0 0>; +};
PMI8996 is *almost* the same hardware as PMI8994, say for some annoyances: - Boards equipped with PMI8996 now have to include pmic-id (which wasn't the case before) - Different qpnp-ibb-discharge-resistor value (will be addressed after LABIBB is introduced) - Different inhibit-derating-ua value (will be addressed after BCL is introduced) - Different ramp_up_step value (will be addressed after [if?] QPNP Flash LED is introduced) This DTSI is supposed to be included >>ON TOP OF<< pmi8994.dtsi, like this: -- msm8996-nice-device.dts -- \#include "pmi8994.dtsi" \#include "pmi8996.dtsi" or more likely like this: -- msm8996-some-phone.dts -- \#include "msm8996.dtsi" ... \#include "pmi8994.dtsi" -- msm8996-pmi8996-some-phone.dts -- \#include "msm8996-some-phone.dts" \#include "pmi8996.dtsi" So that we only have to keep 2 DTs for devices that were shipped with both ones, instead of what would be three (device base + pmi8994 + pmi8996) Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> --- changes since v2: - Add a more explanatory commit message arch/arm64/boot/dts/qcom/pmi8996.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pmi8996.dtsi