diff mbox series

[3/4] arm64: dts: qcom: pmi8998: introduce qpnp haptics

Message ID 20210612205405.1233588-4-caleb@connolly.tech (mailing list archive)
State New
Headers show
Series [1/4] dt-bindings: input: add Qualcomm QPNP haptics driver | expand

Commit Message

Caleb Connolly June 12, 2021, 8:54 p.m. UTC
Add bindings for Qualcomm QPNP haptics, setting default values used on
most devices.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--
2.31.1

Comments

Bjorn Andersson June 13, 2021, 4:21 a.m. UTC | #1
On Sat 12 Jun 15:54 CDT 2021, Caleb Connolly wrote:

> Add bindings for Qualcomm QPNP haptics, setting default values used on
> most devices.
> 
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>  arch/arm64/boot/dts/qcom/pmi8998.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> index d230c510d4b7..ccf64c1898d4 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> @@ -1,4 +1,5 @@
>  // SPDX-License-Identifier: GPL-2.0
> +#include <dt-bindings/input/qcom,qpnp-haptics.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/spmi/spmi.h>
> 
> @@ -41,5 +42,20 @@ lab: lab {
>  				interrupt-names = "sc-err", "ocp";
>  			};
>  		};
> +
> +		qpnp_haptics: qcom,haptics@c000 {

No qcom, in node name, please.

> +			compatible = "qcom,qpnp-haptics";
> +			reg = <0xc000 0x100>;

#size-cells is <0>, so this means 2 addresses. Please drop the "length".

Regards,
Bjorn

> +
> +			interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
> +			interrupt-names = "short", "play";
> +
> +			qcom,wave-shape = <HAP_WAVE_SINE>;
> +			qcom,play-mode = <HAP_PLAY_BUFFER>;
> +			qcom,brake-pattern = <0x3 0x3 0x2 0x1>;
> +
> +			status = "disabled";
> +		};
>  	};
>  };
> --
> 2.31.1
> 
>
Bjorn Andersson June 13, 2021, 4:22 a.m. UTC | #2
On Sat 12 Jun 15:54 CDT 2021, Caleb Connolly wrote:

> Add bindings for Qualcomm QPNP haptics, setting default values used on
> most devices.
> 
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>  arch/arm64/boot/dts/qcom/pmi8998.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> index d230c510d4b7..ccf64c1898d4 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> @@ -1,4 +1,5 @@
>  // SPDX-License-Identifier: GPL-2.0
> +#include <dt-bindings/input/qcom,qpnp-haptics.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/spmi/spmi.h>
> 
> @@ -41,5 +42,20 @@ lab: lab {
>  				interrupt-names = "sc-err", "ocp";
>  			};
>  		};
> +
> +		qpnp_haptics: qcom,haptics@c000 {

Also, please label this pmi8998_haptics, to make it easier to find where
it's defined when looking at the .dts.

Thanks,
Bjorn

> +			compatible = "qcom,qpnp-haptics";
> +			reg = <0xc000 0x100>;
> +
> +			interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
> +			interrupt-names = "short", "play";
> +
> +			qcom,wave-shape = <HAP_WAVE_SINE>;
> +			qcom,play-mode = <HAP_PLAY_BUFFER>;
> +			qcom,brake-pattern = <0x3 0x3 0x2 0x1>;
> +
> +			status = "disabled";
> +		};
>  	};
>  };
> --
> 2.31.1
> 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index d230c510d4b7..ccf64c1898d4 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -1,4 +1,5 @@ 
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/qcom,qpnp-haptics.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>

@@ -41,5 +42,20 @@  lab: lab {
 				interrupt-names = "sc-err", "ocp";
 			};
 		};
+
+		qpnp_haptics: qcom,haptics@c000 {
+			compatible = "qcom,qpnp-haptics";
+			reg = <0xc000 0x100>;
+
+			interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "short", "play";
+
+			qcom,wave-shape = <HAP_WAVE_SINE>;
+			qcom,play-mode = <HAP_PLAY_BUFFER>;
+			qcom,brake-pattern = <0x3 0x3 0x2 0x1>;
+
+			status = "disabled";
+		};
 	};
 };