| Message ID | 20210617051712.345372-2-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board | expand |
On Thu 17 Jun 00:17 CDT 2021, Bhupesh Sharma wrote: > Arrange the compatibles inside qcom-rpmh regulator device tree > bindings alphabetically. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Cc: Mark Brown <broonie@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > .../bindings/regulator/qcom,rpmh-regulator.yaml | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > index e561a5b941e4..3546c6a966a3 100644 > --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > @@ -33,6 +33,9 @@ description: | > > The names used for regulator nodes must match those supported by a given > PMIC. Supported regulator node names are > + For PM6150, smps1 - smps5, ldo1 - ldo19 > + For PM6150L, smps1 - smps8, ldo1 - ldo11, bob > + For PM7325, smps1 - smps8, ldo1 - ldo19 > For PM8005, smps1 - smps4 > For PM8009, smps1 - smps2, ldo1 - ldo7 > For PM8150, smps1 - smps10, ldo1 - ldo18 > @@ -41,15 +44,15 @@ description: | > For PM8350C, smps1 - smps10, ldo1 - ldo13, bob > For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 > For PMI8998, bob > - For PM6150, smps1 - smps5, ldo1 - ldo19 > - For PM6150L, smps1 - smps8, ldo1 - ldo11, bob > - For PMX55, smps1 - smps7, ldo1 - ldo16 > - For PM7325, smps1 - smps8, ldo1 - ldo19 > For PMR735A, smps1 - smps3, ldo1 - ldo7 > + For PMX55, smps1 - smps7, ldo1 - ldo16 > > properties: > compatible: > enum: > + - qcom,pm6150-rpmh-regulators > + - qcom,pm6150l-rpmh-regulators > + - qcom,pm7325-rpmh-regulators > - qcom,pm8005-rpmh-regulators > - qcom,pm8009-rpmh-regulators > - qcom,pm8009-1-rpmh-regulators > @@ -59,11 +62,8 @@ properties: > - qcom,pm8350c-rpmh-regulators > - qcom,pm8998-rpmh-regulators > - qcom,pmi8998-rpmh-regulators > - - qcom,pm6150-rpmh-regulators > - - qcom,pm6150l-rpmh-regulators > - - qcom,pmx55-rpmh-regulators > - - qcom,pm7325-rpmh-regulators > - qcom,pmr735a-rpmh-regulators > + - qcom,pmx55-rpmh-regulators > > qcom,pmic-id: > description: | > -- > 2.31.1 >
On Thu, 17 Jun 2021 10:47:08 +0530, Bhupesh Sharma wrote: > Arrange the compatibles inside qcom-rpmh regulator device tree > bindings alphabetically. > > Cc: Mark Brown <broonie@kernel.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > .../bindings/regulator/qcom,rpmh-regulator.yaml | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > Acked-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index e561a5b941e4..3546c6a966a3 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -33,6 +33,9 @@ description: | The names used for regulator nodes must match those supported by a given PMIC. Supported regulator node names are + For PM6150, smps1 - smps5, ldo1 - ldo19 + For PM6150L, smps1 - smps8, ldo1 - ldo11, bob + For PM7325, smps1 - smps8, ldo1 - ldo19 For PM8005, smps1 - smps4 For PM8009, smps1 - smps2, ldo1 - ldo7 For PM8150, smps1 - smps10, ldo1 - ldo18 @@ -41,15 +44,15 @@ description: | For PM8350C, smps1 - smps10, ldo1 - ldo13, bob For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 For PMI8998, bob - For PM6150, smps1 - smps5, ldo1 - ldo19 - For PM6150L, smps1 - smps8, ldo1 - ldo11, bob - For PMX55, smps1 - smps7, ldo1 - ldo16 - For PM7325, smps1 - smps8, ldo1 - ldo19 For PMR735A, smps1 - smps3, ldo1 - ldo7 + For PMX55, smps1 - smps7, ldo1 - ldo16 properties: compatible: enum: + - qcom,pm6150-rpmh-regulators + - qcom,pm6150l-rpmh-regulators + - qcom,pm7325-rpmh-regulators - qcom,pm8005-rpmh-regulators - qcom,pm8009-rpmh-regulators - qcom,pm8009-1-rpmh-regulators @@ -59,11 +62,8 @@ properties: - qcom,pm8350c-rpmh-regulators - qcom,pm8998-rpmh-regulators - qcom,pmi8998-rpmh-regulators - - qcom,pm6150-rpmh-regulators - - qcom,pm6150l-rpmh-regulators - - qcom,pmx55-rpmh-regulators - - qcom,pm7325-rpmh-regulators - qcom,pmr735a-rpmh-regulators + - qcom,pmx55-rpmh-regulators qcom,pmic-id: description: |
Arrange the compatibles inside qcom-rpmh regulator device tree bindings alphabetically. Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- .../bindings/regulator/qcom,rpmh-regulator.yaml | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)