diff mbox series

[v7,2/5] dt-bindings: soc: qcom: Add devicetree binding for QCOM SPM

Message ID 20210622141117.358893-3-angelogioacchino.delregno@somainline.org (mailing list archive)
State Superseded
Headers show
Series Implement SPM/SAW for MSM8998 and SDM6xx | expand

Commit Message

AngeloGioacchino Del Regno June 22, 2021, 2:11 p.m. UTC
Add devicetree binding for Qualcomm Subsystem Power Manager (SPM).

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 .../bindings/soc/qcom/qcom,spm.yaml           | 55 +++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml

Comments

Rob Herring June 23, 2021, 2:19 p.m. UTC | #1
On Tue, 22 Jun 2021 16:11:14 +0200, AngeloGioacchino Del Regno wrote:
> Add devicetree binding for Qualcomm Subsystem Power Manager (SPM).
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> ---
>  .../bindings/soc/qcom/qcom,spm.yaml           | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,spm.example.dt.yaml: power-controller@f9089000: compatible: ['qcom,msm8974-saw2-v2.1-cpu', 'qcom,saw2'] is too long
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,spm.example.dt.yaml: power-controller@f9089000: compatible: Additional items are not allowed ('qcom,saw2' was unexpected)
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/qcom,spm.example.dt.yaml: power-controller@f9089000: '#power-domain-cells' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/power-domain.yaml
Documentation/devicetree/bindings/soc/qcom/qcom,spm.example.dt.yaml:0:0: /example-0/power-controller@f9089000: failed to match any schema with compatible: ['qcom,msm8974-saw2-v2.1-cpu', 'qcom,saw2']
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1495727

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
new file mode 100644
index 000000000000..4aaa319b2932
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
@@ -0,0 +1,55 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Subsystem Power Manager binding
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Qualcomm Subsystem Power Manager, used to control
+  the peripheral logic surrounding the application cores in Qualcomm platforms.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8974-saw2-v2.1-cpu
+      - qcom,apq8084-saw2-v2.1-cpu
+      - qcom,apq8064-saw2-v1.1-cpu
+
+  reg:
+    description: Base address and size of the SPM register region
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,kryo";
+            device_type = "cpu";
+            enable-method = "qcom,kpss-acc-v2";
+            qcom,saw = <&saw0>;
+            reg = <0x0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    saw0: power-controller@f9089000 {
+        compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+        reg = <0xf9089000 0x1000>;
+    };
+
+...