diff mbox series

[v3,1/1] arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem

Message ID 20210622185023.14597-1-petr.vorel@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v3,1/1] arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem | expand

Commit Message

Petr Vorel June 22, 2021, 6:50 p.m. UTC
As the default definition breaks booting angler:
[    1.862561] printk: console [ttyMSM0] enabled
[    1.872260] msm_serial: driver initialized
D -     15524 - pm_driver_init, Delta

cont_splash_mem was introduced in 74d6d0a145835, but the problem
manifested after 86588296acbf ("fdt: Properly handle "no-map" field
in the memory region").

Disabling it because downstream kernel does not report where the memory
is allocated:
[    0.000000] cma: Found cont_splash_mem@0, memory base 0x0000000000000000, size 16 MiB, limit 0x0000000000000000
[    0.000000] cma: CMA: reserved 16 MiB at 0x0000000000000000 for cont_splash_mem

Fixes: 74d6d0a145835 ("arm64: dts: qcom: msm8994/8994-kitakami: Fix up
the memory map")

Suggested-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
---
Changes v2->v3:
* get back to v1 which just disabled the node
* use alias instead of memory@3800000

 arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 3 +++
 1 file changed, 3 insertions(+)

Comments

Konrad Dybcio June 22, 2021, 6:55 p.m. UTC | #1
I'm terribly sorry for not asking for this before, but could you please add a comment above
the /delete-node/ explaining the weird firmware situation? It hasn't happened before to any
board to my knowledge..

Sorry once again!

Konrad
Petr Vorel June 22, 2021, 6:58 p.m. UTC | #2
Hi Konrad,

> I'm terribly sorry for not asking for this before, but could you please add a comment above
> the /delete-node/ explaining the weird firmware situation? It hasn't happened before to any
> board to my knowledge..
I thought explaining in the commit message would be enough, but sure comment
does not harm => I'll send v4.

> Sorry once again!
np. Thanks for all your comments.

> Konrad

Kind regards,
Petr
Konrad Dybcio June 22, 2021, 7 p.m. UTC | #3
On 22.06.2021 20:58, Petr Vorel wrote:
> Hi Konrad,
>
>> I'm terribly sorry for not asking for this before, but could you please add a comment above
>> the /delete-node/ explaining the weird firmware situation? It hasn't happened before to any
>> board to my knowledge..
> I thought explaining in the commit message would be enough, but sure comment
> does not harm => I'll send v4.

Maybe I'm just too young, but I rarely ever read those and I am pretty sure

I'm not alone in this manner, heh


Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index ffe1a9bd8f70..2c1881a22fee 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -1,12 +1,15 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2015, Huawei Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
  */
 
 /dts-v1/;
 
 #include "msm8994.dtsi"
 
+/delete-node/ &cont_splash_mem;
+
 / {
 	model = "Huawei Nexus 6P";
 	compatible = "huawei,angler", "qcom,msm8994";