diff mbox series

[v2,5/5] arm64: boot: dts: qcom: sdm845: Remove passive trip points for thermal zones 0-7

Message ID 20210624115813.3613290-6-thara.gopinath@linaro.org (mailing list archive)
State Superseded
Headers show
Series Introduce LMh driver for Qualcomm SoCs | expand

Commit Message

Thara Gopinath June 24, 2021, 11:58 a.m. UTC
Now that Limits h/w is enabled to monitor thermal events around cpus and
throttle the cpu frequencies, remove cpufreq cooling device for the cpus which
does software throttling of cpu frequencies.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---

v1->v2:
	Removing only cooling maps for cpu specific thermal zones keeping the
	trip point definitions intact as per Daniel's suggestion. This is to
	ensure that thermal zone temparature and trip violation information is
	available to any userspace daemon monitoring these zones.

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 136 ---------------------------
 1 file changed, 136 deletions(-)

Comments

Matthias Kaehlcke June 24, 2021, 4:51 p.m. UTC | #1
On Thu, Jun 24, 2021 at 07:58:13AM -0400, Thara Gopinath wrote:

> Subject: arm64: boot: dts: qcom: sdm845: Remove passive trip points for thermal zones 0-7

The patch doesn't remove the passive trip points (anymore?), but the cooling
maps/devices. Also talking about 'thermal zones 0-7' doesn't really convey
any useful information (and the enumeration could potentially change in the
future), better talk about the CPU thermal zones.

> Now that Limits h/w is enabled to monitor thermal events around cpus and
> throttle the cpu frequencies, remove cpufreq cooling device for the cpus which
> does software throttling of cpu frequencies.
Thara Gopinath June 25, 2021, 3:44 p.m. UTC | #2
On 6/24/21 12:51 PM, Matthias Kaehlcke wrote:
> On Thu, Jun 24, 2021 at 07:58:13AM -0400, Thara Gopinath wrote:
> 
>> Subject: arm64: boot: dts: qcom: sdm845: Remove passive trip points for thermal zones 0-7
> 
> The patch doesn't remove the passive trip points (anymore?), but the cooling
> maps/devices. Also talking about 'thermal zones 0-7' doesn't really convey
> any useful information (and the enumeration could potentially change in the
> future), better talk about the CPU thermal zones.

Hi Matthias,

Yes you are right. I forgot to change the subject. Will fix the subject 
and provide better description of the zones in the next rev

> 
>> Now that Limits h/w is enabled to monitor thermal events around cpus and
>> throttle the cpu frequencies, remove cpufreq cooling device for the cpus which
>> does software throttling of cpu frequencies.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 202fec09becd..7819f87d97ac 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4994,23 +4994,6 @@  cpu0_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu0_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu1-thermal {
@@ -5038,23 +5021,6 @@  cpu1_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu2-thermal {
@@ -5082,23 +5048,6 @@  cpu2_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu2_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu3-thermal {
@@ -5126,23 +5075,6 @@  cpu3_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu4-thermal {
@@ -5170,23 +5102,6 @@  cpu4_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu4_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu4_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu5-thermal {
@@ -5214,23 +5129,6 @@  cpu5_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu5_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu5_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu6-thermal {
@@ -5258,23 +5156,6 @@  cpu6_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu6_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu6_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		cpu7-thermal {
@@ -5302,23 +5183,6 @@  cpu7_crit: cpu_crit {
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu7_alert0>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu7_alert1>;
-					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 
 		aoss0-thermal {