| Message ID | 20210704024032.11559-2-shawn.guo@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add MSM8939 APCS/A53PLL clock support | expand |
Quoting Shawn Guo (2021-07-03 19:40:29) > The clock source for MSM8916 cpu cores is like below. > > |\ > a53pll --------| \ a53mux +------+ Applied to clk-next
diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c index af6ac17c7dae..d6756bd777ce 100644 --- a/drivers/clk/qcom/a53-pll.c +++ b/drivers/clk/qcom/a53-pll.c @@ -70,7 +70,6 @@ static int qcom_a53pll_probe(struct platform_device *pdev) init.parent_names = (const char *[]){ "xo" }; init.num_parents = 1; init.ops = &clk_pll_sr2_ops; - init.flags = CLK_IS_CRITICAL; pll->clkr.hw.init = &init; ret = devm_clk_register_regmap(dev, &pll->clkr); diff --git a/drivers/clk/qcom/apcs-msm8916.c b/drivers/clk/qcom/apcs-msm8916.c index cf69a97d0439..d7ac6d6b15b6 100644 --- a/drivers/clk/qcom/apcs-msm8916.c +++ b/drivers/clk/qcom/apcs-msm8916.c @@ -65,7 +65,7 @@ static int qcom_apcs_msm8916_clk_probe(struct platform_device *pdev) init.parent_data = pdata; init.num_parents = ARRAY_SIZE(pdata); init.ops = &clk_regmap_mux_div_ops; - init.flags = CLK_SET_RATE_PARENT; + init.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT; a53cc->clkr.hw.init = &init; a53cc->clkr.regmap = regmap;
The clock source for MSM8916 cpu cores is like below. |\ a53pll --------| \ a53mux +------+ | |------------| cpus | gpll0_vote --------| / +------+ |/ So a53mux rather than a53pll is actually the parent clock of cpu cores. It makes more sense to flag a53mux as critical instead, so that when either a53pll or gpll0_vote is used by cpu cores, the clock will be kept enabled while the other can be disabled. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/clk/qcom/a53-pll.c | 1 - drivers/clk/qcom/apcs-msm8916.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-)