diff mbox series

[14/17] arm64: dts: qcom: sm6350: Add SDHCI1/2 nodes

Message ID 20210820204926.235192-15-konrad.dybcio@somainline.org (mailing list archive)
State Superseded
Headers show
Series None | expand

Commit Message

Konrad Dybcio Aug. 20, 2021, 8:49 p.m. UTC 
Add SDHCI1/2 nodes for eMMC and uSD card respectively.
Do note that most SM6350 devices seem to come with UFS.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 81 ++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 9ca14fa8324a..df99d6207f1c 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -7,6 +7,7 @@ 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -398,12 +399,92 @@  rng: rng@793000 {
 			clock-names = "core";
 		};
 
+		sdhc_1: sdhci@7c4000 {
+			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x007c4000 0 0x1000>,
+				<0 0x007c5000 0 0x1000>,
+				<0 0x007c8000 0 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd SM6350_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			status = "disabled";
+
+			sdhc1_opp_table: sdhc1-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 			#hwlock-cells = <1>;
 		};
 
+		sdhc_2: sdhci@8804000 {
+			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd SM6350_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: sdhc2-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy";
 			reg = <0 0x088e3000 0 0x400>;