diff mbox series

[v2,3/4] arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node

Message ID 20210923212311.2877048-4-bjorn.andersson@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: sdm845: Add thermal zones for PM8998 ADC | expand

Commit Message

Bjorn Andersson Sept. 23, 2021, 9:23 p.m. UTC
Add a node for the ADC Thermal Monitor found in the PM8998 PMIC. This is
used to connect thermal zones with ADC channels.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- New patch

 arch/arm64/boot/dts/qcom/pm8998.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Dmitry Baryshkov Nov. 18, 2021, 10:04 p.m. UTC | #1
On 24/09/2021 00:23, Bjorn Andersson wrote:
> Add a node for the ADC Thermal Monitor found in the PM8998 PMIC. This is
> used to connect thermal zones with ADC channels.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
> 
> Changes since v1:
> - New patch
> 
>   arch/arm64/boot/dts/qcom/pm8998.dtsi | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> index 6f5bb6b37ec2..d09f2954b6f9 100644
> --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> @@ -84,6 +84,16 @@ adc-chan@6 {
>   			};
>   		};
>   
> +		pm8998_adc_tm: adc-tm@3400 {
> +			compatible = "qcom,spmi-adc-tm-hc";
> +			reg = <0x3400>;
> +			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
> +			#thermal-sensor-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>   		rtc@6000 {
>   			compatible = "qcom,pm8941-rtc";
>   			reg = <0x6000>, <0x6100>;
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 6f5bb6b37ec2..d09f2954b6f9 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -84,6 +84,16 @@  adc-chan@6 {
 			};
 		};
 
+		pm8998_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm-hc";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;