@@ -519,6 +519,16 @@ config DRM_PANEL_SHARP_LS043T1LE01
Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
(540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
+config DRM_PANEL_SHARP_LS060T1SX01
+ tristate "Sharp LS060T1SX01 FullHD video mode panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
+ FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
+ Bundle.
+
config DRM_PANEL_SITRONIX_ST7701
tristate "Sitronix ST7701 panel driver"
depends on OF
@@ -53,6 +53,7 @@ obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
+obj-$(CONFIG_DRM_PANEL_SHARP_LS060T1SX01) += panel-sharp-ls060t1sx01.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
new file mode 100644
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2021 Linaro Ltd.
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct sharp_ls060 {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+ struct regulator *vddi_supply;
+ struct regulator *vddh_supply;
+ struct regulator *avdd_supply;
+ struct regulator *avee_supply;
+ struct gpio_desc *reset_gpio;
+ bool prepared;
+};
+
+static inline struct sharp_ls060 *to_sharp_ls060(struct drm_panel *panel)
+{
+ return container_of(panel, struct sharp_ls060, panel);
+}
+
+#define dsi_dcs_write_seq(dsi, seq...) ({ \
+ static const u8 d[] = { seq }; \
+ \
+ mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
+ })
+
+static void sharp_ls060_reset(struct sharp_ls060 *ctx)
+{
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+}
+
+static int sharp_ls060_on(struct sharp_ls060 *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi;
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ ret = dsi_dcs_write_seq(dsi, 0xbb, 0x13);
+ if (ret < 0) {
+ dev_err(dev, "Failed to send command: %d\n", ret);
+ return ret;
+ }
+
+ ret = dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
+ if (ret < 0) {
+ dev_err(dev, "Failed to send command: %d\n", ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(120);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display on: %d\n", ret);
+ return ret;
+ }
+ msleep(50);
+
+ return 0;
+}
+
+static int sharp_ls060_off(struct sharp_ls060 *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi;
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display off: %d\n", ret);
+ return ret;
+ }
+ usleep_range(2000, 3000);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(121);
+
+ return 0;
+}
+
+static int sharp_ls060_prepare(struct drm_panel *panel)
+{
+ struct sharp_ls060 *ctx = to_sharp_ls060(panel);
+ struct device *dev = &ctx->dsi->dev;
+ int ret;
+
+ if (ctx->prepared)
+ return 0;
+
+ ret = regulator_enable(ctx->vddi_supply);
+ if (ret < 0)
+ return ret;
+
+ ret = regulator_enable(ctx->avdd_supply);
+ if (ret < 0)
+ goto err_avdd;
+
+ usleep_range(1000, 2000);
+
+ ret = regulator_enable(ctx->avee_supply);
+ if (ret < 0)
+ goto err_avee;
+
+ usleep_range(10000, 11000);
+
+ ret = regulator_enable(ctx->vddh_supply);
+ if (ret < 0)
+ goto err_vddh;
+
+ usleep_range(10000, 11000);
+
+ sharp_ls060_reset(ctx);
+
+ ret = sharp_ls060_on(ctx);
+ if (ret < 0) {
+ dev_err(dev, "Failed to initialize panel: %d\n", ret);
+ goto err_on;
+ }
+
+ ctx->prepared = true;
+
+ return 0;
+
+err_on:
+ regulator_disable(ctx->vddh_supply);
+
+ usleep_range(10000, 11000);
+
+err_vddh:
+ regulator_disable(ctx->avee_supply);
+
+err_avee:
+ regulator_disable(ctx->avdd_supply);
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+err_avdd:
+ regulator_disable(ctx->vddi_supply);
+
+ return ret;
+}
+
+static int sharp_ls060_unprepare(struct drm_panel *panel)
+{
+ struct sharp_ls060 *ctx = to_sharp_ls060(panel);
+ struct device *dev = &ctx->dsi->dev;
+ int ret;
+
+ if (!ctx->prepared)
+ return 0;
+
+ ret = sharp_ls060_off(ctx);
+ if (ret < 0)
+ dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+ regulator_disable(ctx->vddh_supply);
+
+ usleep_range(10000, 11000);
+
+ regulator_disable(ctx->avee_supply);
+ regulator_disable(ctx->avdd_supply);
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+ regulator_disable(ctx->vddi_supply);
+
+ ctx->prepared = false;
+ return 0;
+}
+
+static const struct drm_display_mode sharp_ls060_mode = {
+ .clock = (1080 + 96 + 16 + 64) * (1920 + 4 + 1 + 16) * 60 / 1000,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 96,
+ .hsync_end = 1080 + 96 + 16,
+ .htotal = 1080 + 96 + 16 + 64,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 4,
+ .vsync_end = 1920 + 4 + 1,
+ .vtotal = 1920 + 4 + 1 + 16,
+ .width_mm = 75,
+ .height_mm = 132,
+};
+
+static int sharp_ls060_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &sharp_ls060_mode);
+ if (!mode)
+ return -ENOMEM;
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs sharp_ls060_panel_funcs = {
+ .prepare = sharp_ls060_prepare,
+ .unprepare = sharp_ls060_unprepare,
+ .get_modes = sharp_ls060_get_modes,
+};
+
+static int sharp_ls060_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct sharp_ls060 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->vddi_supply = devm_regulator_get(dev, "vddi");
+ if (IS_ERR(ctx->vddi_supply))
+ return PTR_ERR(ctx->vddi_supply);
+
+ ctx->vddh_supply = devm_regulator_get(dev, "vddh");
+ if (IS_ERR(ctx->vddh_supply))
+ return PTR_ERR(ctx->vddh_supply);
+
+ ctx->avdd_supply = devm_regulator_get(dev, "avdd");
+ if (IS_ERR(ctx->avdd_supply))
+ return PTR_ERR(ctx->avdd_supply);
+
+ ctx->avee_supply = devm_regulator_get(dev, "avee");
+ if (IS_ERR(ctx->avee_supply))
+ return PTR_ERR(ctx->avee_supply);
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+ "Failed to get reset-gpios\n");
+
+ ctx->dsi = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_NO_EOT_PACKET |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+ drm_panel_init(&ctx->panel, dev, &sharp_ls060_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&ctx->panel);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+ drm_panel_add(&ctx->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sharp_ls060_remove(struct mipi_dsi_device *dsi)
+{
+ struct sharp_ls060 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_remove(&ctx->panel);
+
+ return 0;
+}
+
+static const struct of_device_id sharp_ls060t1sx01_of_match[] = {
+ { .compatible = "sharp,ls060t1sx01" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sharp_ls060t1sx01_of_match);
+
+static struct mipi_dsi_driver sharp_ls060_driver = {
+ .probe = sharp_ls060_probe,
+ .remove = sharp_ls060_remove,
+ .driver = {
+ .name = "panel-sharp-ls060t1sx01",
+ .of_match_table = sharp_ls060t1sx01_of_match,
+ },
+};
+module_mipi_dsi_driver(sharp_ls060_driver);
+
+MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
+MODULE_DESCRIPTION("DRM driver for Sharp LS060T1SX01 1080p video mode dsi panel");
+MODULE_LICENSE("GPL v2");
Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses nt35695 driver IC. For example this LCD module can be found in the kwaek.ca Dragonboard Display Adapter Bundle. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-sharp-ls060t1sx01.c | 333 ++++++++++++++++++ 3 files changed, 344 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c