diff mbox series

[v3,1/2] dt-bindings: phy: Introduce Qualcomm eDP/DP PHY binding

Message ID 20211016232128.2341395-1-bjorn.andersson@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series [v3,1/2] dt-bindings: phy: Introduce Qualcomm eDP/DP PHY binding | expand

Commit Message

Bjorn Andersson Oct. 16, 2021, 11:21 p.m. UTC 
Introduce a binding for the eDP/DP PHY hardware block found in several
different Qualcomm platforms.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v2:
- None

 .../devicetree/bindings/phy/qcom,edp-phy.yaml | 69 +++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml

Comments

Rob Herring Oct. 18, 2021, 7:48 p.m. UTC | #1 
On Sat, Oct 16, 2021 at 04:21:27PM -0700, Bjorn Andersson wrote:
> Introduce a binding for the eDP/DP PHY hardware block found in several
> different Qualcomm platforms.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Changes since v2:
> - None
> 
>  .../devicetree/bindings/phy/qcom,edp-phy.yaml | 69 +++++++++++++++++++
>  1 file changed, 69 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> new file mode 100644
> index 000000000000..c258e4f7e332
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm DP/eDP PHY
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description:
> +  The Qualcomm DP/eDP PHY is found in a number of Qualcomm platform and
> +  provides the physical interface for DisplayPort and Embedded Display Port.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sc8180x-dp-phy
> +      - qcom,sc8180x-edp-phy

Is there a difference between DP and eDP?

Perhaps note what that is if so.

> +
> +  reg:
> +    items:
> +      - description: PHY base register block
> +      - description: tx0 register block
> +      - description: tx1 register block
> +      - description: PLL register block
> +
> +  clocks:
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: aux
> +      - const: cfg_ahb
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  "#phy-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - "#clock-cells"
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    phy@aec2a00 {
> +      compatible = "qcom,sc8180x-edp-phy";
> +      reg = <0x0aec2a00 0x1c0>,
> +            <0x0aec2200 0xa0>,
> +            <0x0aec2600 0xa0>,
> +            <0x0aec2000 0x19c>;
> +
> +      clocks = <&dispcc 0>, <&dispcc 1>;
> +      clock-names = "aux", "cfg_ahb";
> +
> +      #clock-cells = <1>;
> +      #phy-cells = <0>;
> +    };
> +...
> -- 
> 2.29.2
> 
>
Bjorn Andersson Oct. 21, 2021, 2:51 p.m. UTC | #2 
On Mon 18 Oct 12:48 PDT 2021, Rob Herring wrote:

> On Sat, Oct 16, 2021 at 04:21:27PM -0700, Bjorn Andersson wrote:
> > Introduce a binding for the eDP/DP PHY hardware block found in several
> > different Qualcomm platforms.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > 
> > Changes since v2:
> > - None
> > 
> >  .../devicetree/bindings/phy/qcom,edp-phy.yaml | 69 +++++++++++++++++++
> >  1 file changed, 69 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> > new file mode 100644
> > index 000000000000..c258e4f7e332
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm DP/eDP PHY
> > +
> > +maintainers:
> > +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +description:
> > +  The Qualcomm DP/eDP PHY is found in a number of Qualcomm platform and
> > +  provides the physical interface for DisplayPort and Embedded Display Port.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - qcom,sc8180x-dp-phy
> > +      - qcom,sc8180x-edp-phy
> 
> Is there a difference between DP and eDP?
> 

It's the same hardware block, with the same inputs, but the two modes
requires different programming sequences. So I need some way to describe
which one this is.

> Perhaps note what that is if so.
> 

What are you suggesting?

Regards,
Bjorn

> > +
> > +  reg:
> > +    items:
> > +      - description: PHY base register block
> > +      - description: tx0 register block
> > +      - description: tx1 register block
> > +      - description: PLL register block
> > +
> > +  clocks:
> > +    maxItems: 2
> > +
> > +  clock-names:
> > +    items:
> > +      - const: aux
> > +      - const: cfg_ahb
> > +
> > +  "#clock-cells":
> > +    const: 1
> > +
> > +  "#phy-cells":
> > +    const: 0
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - "#clock-cells"
> > +  - "#phy-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    phy@aec2a00 {
> > +      compatible = "qcom,sc8180x-edp-phy";
> > +      reg = <0x0aec2a00 0x1c0>,
> > +            <0x0aec2200 0xa0>,
> > +            <0x0aec2600 0xa0>,
> > +            <0x0aec2000 0x19c>;
> > +
> > +      clocks = <&dispcc 0>, <&dispcc 1>;
> > +      clock-names = "aux", "cfg_ahb";
> > +
> > +      #clock-cells = <1>;
> > +      #phy-cells = <0>;
> > +    };
> > +...
> > -- 
> > 2.29.2
> > 
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
new file mode 100644
index 000000000000..c258e4f7e332
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -0,0 +1,69 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm DP/eDP PHY
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm DP/eDP PHY is found in a number of Qualcomm platform and
+  provides the physical interface for DisplayPort and Embedded Display Port.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8180x-dp-phy
+      - qcom,sc8180x-edp-phy
+
+  reg:
+    items:
+      - description: PHY base register block
+      - description: tx0 register block
+      - description: tx1 register block
+      - description: PLL register block
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@aec2a00 {
+      compatible = "qcom,sc8180x-edp-phy";
+      reg = <0x0aec2a00 0x1c0>,
+            <0x0aec2200 0xa0>,
+            <0x0aec2600 0xa0>,
+            <0x0aec2000 0x19c>;
+
+      clocks = <&dispcc 0>, <&dispcc 1>;
+      clock-names = "aux", "cfg_ahb";
+
+      #clock-cells = <1>;
+      #phy-cells = <0>;
+    };
+...