diff mbox series

arm64: dts: qcom: msm8996-xiaomi-common: Change TUSB320 to TUSB320L

Message ID 20211104111454.105875-1-y.oudjana@protonmail.com (mailing list archive)
State Accepted
Headers show
Series arm64: dts: qcom: msm8996-xiaomi-common: Change TUSB320 to TUSB320L | expand

Commit Message

Yassine Oudjana Nov. 4, 2021, 11:15 a.m. UTC
This platform actually doesn't have TUSB320, but rather TUSB320L.
The TUSB320 compatible string was used due to lack of support for
TUSB320L, and it was close enough to detect cable plug-in and
direction, but it was limited to upstream facing port mode only.
Now that support for TUSB320L is added[1], change node name and
compatible to match and allow it to be properly reset and have
its mode set to dual-role port.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=ce0320bd3872038569be360870e2d5251b975692
---
 arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Bjorn Andersson Nov. 20, 2021, 11:55 p.m. UTC | #1
On Thu, 04 Nov 2021 11:15:18 +0000, Yassine Oudjana wrote:
> This platform actually doesn't have TUSB320, but rather TUSB320L.
> The TUSB320 compatible string was used due to lack of support for
> TUSB320L, and it was close enough to detect cable plug-in and
> direction, but it was limited to upstream facing port mode only.
> Now that support for TUSB320L is added[1], change node name and
> compatible to match and allow it to be properly reset and have
> its mode set to dual-role port.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: msm8996-xiaomi-common: Change TUSB320 to TUSB320L
      commit: de0a2ae359ef9ccbaab86cce44d442cd0ca36985

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 01e573f0dfbf..7a9fcbe9bb31 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -207,8 +207,8 @@  &blsp2_i2c3 {
 	status = "okay";
 	label = "TYPEC_I2C";
 
-	typec: tusb320@47 {
-		compatible = "ti,tusb320";
+	typec: tusb320l@47 {
+		compatible = "ti,tusb320l";
 		reg = <0x47>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <63 IRQ_TYPE_EDGE_RISING>;