diff mbox series

[v4,3/6] arm64: dts: qcom: pmi8998: introduce spmi haptics

Message ID 20211210022639.2779173-4-caleb@connolly.tech (mailing list archive)
State Changes Requested
Headers show
Series input: Introduce support for SPMI haptics found on Qcom PMICs | expand

Commit Message

Caleb Connolly Dec. 10, 2021, 2:27 a.m. UTC
Add bindings for Qualcomm SPMI haptics on platforms using pmi8998.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

--
2.34.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 0fef5f113f05..97d993f31ddd 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -1,4 +1,5 @@ 
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/qcom,spmi-haptics.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>

@@ -53,5 +54,19 @@  pmi8998_wled: leds@d800 {
 			status = "disabled";
 		};

+		pmi8998_haptics: haptics@c000 {
+			compatible = "qcom,pmi8998-haptics";
+			reg = <0xc000>;
+
+			interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "short", "play";
+
+			qcom,wave-shape = <HAP_WAVE_SINE>;
+			qcom,play-mode = <HAP_PLAY_BUFFER>;
+			qcom,brake-pattern = <0x3 0x3 0x2 0x1>;
+
+			status = "disabled";
+		};
 	};
 };