@@ -161,7 +161,7 @@ struct qcom_pcie_resources_2_3_3 {
/* 6 clocks typically, 7 for sm8250 */
struct qcom_pcie_resources_2_7_0 {
- struct clk_bulk_data clks[7];
+ struct clk_bulk_data clks[9];
int num_clks;
struct regulator_bulk_data supplies[2];
struct reset_control *pci_reset;
@@ -195,7 +195,10 @@ struct qcom_pcie_ops {
struct qcom_pcie_cfg {
const struct qcom_pcie_ops *ops;
unsigned int pipe_clk_need_muxing:1;
+ unsigned int has_tbu_clk:1;
unsigned int has_ddrss_sf_tbu_clk:1;
+ unsigned int has_aggre0_clk:1;
+ unsigned int has_aggre1_clk:1;
};
struct qcom_pcie {
@@ -1146,6 +1149,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
+ unsigned int idx;
int ret;
res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
@@ -1159,18 +1163,22 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
if (ret)
return ret;
- res->clks[0].id = "aux";
- res->clks[1].id = "cfg";
- res->clks[2].id = "bus_master";
- res->clks[3].id = "bus_slave";
- res->clks[4].id = "slave_q2a";
- res->clks[5].id = "tbu";
- if (pcie->cfg->has_ddrss_sf_tbu_clk) {
- res->clks[6].id = "ddrss_sf_tbu";
- res->num_clks = 7;
- } else {
- res->num_clks = 6;
- }
+ idx = 0;
+ res->clks[idx++].id = "aux";
+ res->clks[idx++].id = "cfg";
+ res->clks[idx++].id = "bus_master";
+ res->clks[idx++].id = "bus_slave";
+ res->clks[idx++].id = "slave_q2a";
+ if (pcie->cfg->has_tbu_clk)
+ res->clks[idx++].id = "tbu";
+ if (pcie->cfg->has_ddrss_sf_tbu_clk)
+ res->clks[idx++].id = "ddrss_sf_tbu";
+ if (pcie->cfg->has_aggre0_clk)
+ res->clks[idx++].id = "aggre0";
+ if (pcie->cfg->has_aggre1_clk)
+ res->clks[idx++].id = "aggre1";
+
+ res->num_clks = idx;
ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
if (ret < 0)
@@ -1509,15 +1517,27 @@ static const struct qcom_pcie_cfg ipq4019_cfg = {
static const struct qcom_pcie_cfg sdm845_cfg = {
.ops = &ops_2_7_0,
+ .has_tbu_clk = true,
};
static const struct qcom_pcie_cfg sm8250_cfg = {
.ops = &ops_1_9_0,
+ .has_tbu_clk = true,
.has_ddrss_sf_tbu_clk = true,
};
+/* Only for the PCIe0! */
+static const struct qcom_pcie_cfg sm8450_cfg = {
+ .ops = &ops_1_9_0,
+ .has_ddrss_sf_tbu_clk = true,
+ .pipe_clk_need_muxing = true,
+ .has_aggre0_clk = true,
+ .has_aggre1_clk = true,
+};
+
static const struct qcom_pcie_cfg sc7280_cfg = {
.ops = &ops_1_9_0,
+ .has_tbu_clk = true,
.pipe_clk_need_muxing = true,
};
@@ -1625,6 +1645,7 @@ static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
{ .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
{ .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg },
+ { .compatible = "qcom,pcie-sm8450", .data = &sm8450_cfg },
{ .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
{ }
};
On SM8450 platform PCIe hosts do not use all the clocks (and add several additional clocks), so expand the driver to handle these requirements. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 47 +++++++++++++++++++------- 1 file changed, 34 insertions(+), 13 deletions(-)