| Message ID | 20220126183250.11924-3-michael.srba@seznam.cz (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v4,1/5] dt-bindings: clock: gcc-msm8998: Add definitions of SSC-related clocks | expand |
On Wed, 26 Jan 2022 19:32:48 +0100, michael.srba@seznam.cz wrote: > From: Michael Srba <Michael.Srba@seznam.cz> > > This patch adds bindings for the AHB bus which exposes the SCC block in > the global address space. This bus (and the SSC block itself) is present > on certain qcom SoCs. > > In typical configuration, this bus (as some of the clocks and registers > that we need to manipulate) is not accessible to the OS, and the > resources on this bus are indirectly accessed by communicating with a > hexagon CPU core residing in the SSC block. In this configuration, the > hypervisor is the one performing the bus initialization for the purposes > of bringing the haxagon CPU core out of reset. > > However, it is possible to change the configuration, in which case this > binding serves to allow the OS to initialize the bus. > > Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> > --- > CHANGES: > - v2: fix issues caught by by dt-schema > - v3: none > - v4: address the issues pointed out in the review > --- > .../bindings/bus/qcom,ssc-block-bus.yaml | 150 ++++++++++++++++++ > 1 file changed, 150 insertions(+) > create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml:86:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.example.dt.yaml:0:0: /example-0/soc/bus@10ac008/pinctrl@5e10000: failed to match any schema with compatible: ['qcom,msm8998-ssc-tlmm-pinctrl'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1584622 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Wed, Jan 26, 2022 at 07:32:48PM +0100, michael.srba@seznam.cz wrote: > From: Michael Srba <Michael.Srba@seznam.cz> > > This patch adds bindings for the AHB bus which exposes the SCC block in > the global address space. This bus (and the SSC block itself) is present > on certain qcom SoCs. > > In typical configuration, this bus (as some of the clocks and registers > that we need to manipulate) is not accessible to the OS, and the > resources on this bus are indirectly accessed by communicating with a > hexagon CPU core residing in the SSC block. In this configuration, the > hypervisor is the one performing the bus initialization for the purposes > of bringing the haxagon CPU core out of reset. > > However, it is possible to change the configuration, in which case this > binding serves to allow the OS to initialize the bus. > > Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> > --- > CHANGES: > - v2: fix issues caught by by dt-schema > - v3: none > - v4: address the issues pointed out in the review > --- > .../bindings/bus/qcom,ssc-block-bus.yaml | 150 ++++++++++++++++++ > 1 file changed, 150 insertions(+) > create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml > > diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml > new file mode 100644 > index 000000000000..4bde169b1a19 > --- /dev/null > +++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml > @@ -0,0 +1,150 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs > + > +maintainers: > + - Michael Srba <Michael.Srba@seznam.cz> > + > +description: | > + This binding describes the dependencies (clocks, resets, power domains) which > + need to be turned on in a sequence before communication over the AHB bus > + becomes possible. > + > + Additionally, the reg property is used to pass to the driver the location of > + two sadly undocumented registers which need to be poked as part of the sequence. > + > +properties: > + compatible: > + items: > + - const: qcom,msm8998-ssc-block-bus > + - const: qcom,ssc-block-bus > + > + reg: > + description: | > + Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1 > + registers > + minItems: 2 > + maxItems: 2 > + > + reg-names: > + items: > + - const: mpm_sscaon_config0 > + - const: mpm_sscaon_config1 > + > + '#address-cells': > + enum: [ 1, 2 ] > + > + '#size-cells': > + enum: [ 1, 2 ] > + > + ranges: true > + > + clocks: > + minItems: 6 > + maxItems: 6 > + > + clock-names: > + items: > + - const: xo > + - const: aggre2 > + - const: gcc_im_sleep > + - const: aggre2_north > + - const: ssc_xo > + - const: ssc_ahbs > + > + power-domains: > + description: Power domain phandles for the ssc_cx and ssc_mx power domains > + minItems: 2 > + maxItems: 2 > + > + power-domain-names: > + items: > + - const: ssc_cx > + - const: ssc_mx > + > + resets: > + description: | > + Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the > + branch control register associated with the ssc_xo and ssc_ahbs clocks) > + minItems: 2 > + maxItems: 2 > + > + reset-names: > + items: > + - const: ssc_reset > + - const: ssc_bcr > + > + qcom,halt-regs: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: describes how to locate the ssc AXI halt register > + items: > + - items: > + - description: Phandle reference to a syscon representing TCSR > + - description: offset for the ssc AXI halt register > + > +required: > + - compatible > + - reg > + - reg-names > + - '#address-cells' > + - '#size-cells' > + - ranges > + - clocks > + - clock-names > + - power-domains > + - power-domain-names > + - resets > + - reset-names > + - qcom,halt-regs > + > +additionalProperties: true To say anything else should be a node: additionalProperties: type: object > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,gcc-msm8998.h> > + #include <dt-bindings/clock/qcom,rpmcc.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + > + soc { > + #address-cells = <1>; > + #size-cells = <1>; > + > + // devices under this node are physically located in the SSC block, connected to an ssc-internal bus; > + ssc_ahb_slave: bus@10ac008 { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus"; > + reg = <0x10ac008 0x4>, <0x10ac010 0x4>; > + reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1"; > + > + clocks = <&xo>, > + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, > + <&gcc GCC_IM_SLEEP>, > + <&gcc AGGRE2_SNOC_NORTH_AXI>, > + <&gcc SSC_XO>, > + <&gcc SSC_CNOC_AHBS_CLK>; > + clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs"; > + > + resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>; > + reset-names = "ssc_reset", "ssc_bcr"; > + > + power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>; > + power-domain-names = "ssc_cx", "ssc_mx"; > + > + qcom,halt-regs = <&tcsr_mutex_regs 0x26000>; > + > + ssc_tlmm: pinctrl@5e10000 { > + compatible = "qcom,msm8998-ssc-tlmm-pinctrl"; If you don't want to define a schema for this, pick another node that has a schema already. > + reg = <0x5E10000 0x10000>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&ssc_tlmm 0 0 20>; > + }; > + }; > + }; > -- > 2.34.1 > >
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml new file mode 100644 index 000000000000..4bde169b1a19 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + +description: | + This binding describes the dependencies (clocks, resets, power domains) which + need to be turned on in a sequence before communication over the AHB bus + becomes possible. + + Additionally, the reg property is used to pass to the driver the location of + two sadly undocumented registers which need to be poked as part of the sequence. + +properties: + compatible: + items: + - const: qcom,msm8998-ssc-block-bus + - const: qcom,ssc-block-bus + + reg: + description: | + Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1 + registers + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: mpm_sscaon_config0 + - const: mpm_sscaon_config1 + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: xo + - const: aggre2 + - const: gcc_im_sleep + - const: aggre2_north + - const: ssc_xo + - const: ssc_ahbs + + power-domains: + description: Power domain phandles for the ssc_cx and ssc_mx power domains + minItems: 2 + maxItems: 2 + + power-domain-names: + items: + - const: ssc_cx + - const: ssc_mx + + resets: + description: | + Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the + branch control register associated with the ssc_xo and ssc_ahbs clocks) + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: ssc_reset + - const: ssc_bcr + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: describes how to locate the ssc AXI halt register + items: + - items: + - description: Phandle reference to a syscon representing TCSR + - description: offset for the ssc AXI halt register + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + - ranges + - clocks + - clock-names + - power-domains + - power-domain-names + - resets + - reset-names + - qcom,halt-regs + +additionalProperties: true + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + + // devices under this node are physically located in the SSC block, connected to an ssc-internal bus; + ssc_ahb_slave: bus@10ac008 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus"; + reg = <0x10ac008 0x4>, <0x10ac010 0x4>; + reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1"; + + clocks = <&xo>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&gcc GCC_IM_SLEEP>, + <&gcc AGGRE2_SNOC_NORTH_AXI>, + <&gcc SSC_XO>, + <&gcc SSC_CNOC_AHBS_CLK>; + clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs"; + + resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>; + reset-names = "ssc_reset", "ssc_bcr"; + + power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>; + power-domain-names = "ssc_cx", "ssc_mx"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x26000>; + + ssc_tlmm: pinctrl@5e10000 { + compatible = "qcom,msm8998-ssc-tlmm-pinctrl"; + reg = <0x5E10000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ssc_tlmm 0 0 20>; + }; + }; + };