diff mbox series

[4/5] arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrl

Message ID 20220131161034.4.I79baad7f52351aafb470f8b21a9fa79d7031ad6a@changeid (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: sc7x80: A smattering of misc dts cleanups | expand

Commit Message

Doug Anderson Feb. 1, 2022, 12:10 a.m. UTC
This patch makes a few improvements to the way that sdc1 / sdc2
pinctrl is specified on sc7280:

1. There's no reason to "group" the sdc pins into one overarching node
and there's a downside: we have to replicate the hierarchy in the
board device tree files. Let's clean this up.

2. There's really not a lot of reason not to list the "pinctrl" for
sdc1 (eMMC) in the SoC dtsi file. These aren't GPIO pins and
everyone's going to specify the same pins.

3. Even though it's likely that boards will need to override pinctrl
for sdc2 (SD card) to add the card detect GPIO, we can be symmetric
and add it to the SoC dsti file.

4. Let's get rid of the word "on" from the normal config and add a
"sleep" suffix to the sleep config. This looks cleaner to me.

This is intended to be a no-op change but it could plausibly change
behavior depending on how the pinctrl code parses things. One thing to
note is that "SD card detect" is explicitly listed now as keeping its
pull enabled in sleep since we still want to detect card insertions
even if the controller is suspended (because no card is inserted). The
pinctrl framework likely did this anyway, but it's nice to see it
explicit.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 .../qcom/sc7280-herobrine-herobrine-r0.dts    |  73 +++++------
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi      |  91 +++++++-------
 arch/arm64/boot/dts/qcom/sc7280.dtsi          | 119 +++++++++---------
 3 files changed, 135 insertions(+), 148 deletions(-)

Comments

Doug Anderson Feb. 1, 2022, 12:25 a.m. UTC | #1
Hi,

On Mon, Jan 31, 2022 at 4:11 PM Douglas Anderson <dianders@chromium.org> wrote:
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 40cb414bc377..dc98a87e2871 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -616,6 +616,9 @@ qfprom: efuse@784000 {
>
>                 sdhc_1: sdhci@7c4000 {
>                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> +                       pinctrl-names = "default", "sleep";
> +                       pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
> +                       pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
>                         status = "disabled";
>
>                         reg = <0 0x007c4000 0 0x1000>,
> @@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
>
>                 sdhc_2: sdhci@8804000 {
>                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> +                       pinctrl-names = "default", "sleep";
> +                       pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> +                       pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
>                         status = "disabled";
>
>                         reg = <0 0x08804000 0 0x1000>;
> @@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
>                                 function = "qup17";
>                         };
>
> -                       sdc1_on: sdc1-on {
> -                               clk {
> -                                       pins = "sdc1_clk";
> -                               };
>
> -                               cmd {
> -                                       pins = "sdc1_cmd";
> -                               };
>
> -                               data {
> -                                       pins = "sdc1_data";
> -                               };
> +                       sdc1_clk: sdc1-clk {

Ugh. I just noticed that there are way too many blank lines here in
the output. Happy to have this fixed when applying or I can post a v2.

-Doug
Bjorn Andersson Feb. 1, 2022, 12:33 a.m. UTC | #2
On Mon 31 Jan 18:25 CST 2022, Doug Anderson wrote:

> Hi,
> 
> On Mon, Jan 31, 2022 at 4:11 PM Douglas Anderson <dianders@chromium.org> wrote:
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > index 40cb414bc377..dc98a87e2871 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > @@ -616,6 +616,9 @@ qfprom: efuse@784000 {
> >
> >                 sdhc_1: sdhci@7c4000 {
> >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > +                       pinctrl-names = "default", "sleep";
> > +                       pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
> > +                       pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
> >                         status = "disabled";
> >
> >                         reg = <0 0x007c4000 0 0x1000>,
> > @@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
> >
> >                 sdhc_2: sdhci@8804000 {
> >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > +                       pinctrl-names = "default", "sleep";
> > +                       pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> > +                       pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
> >                         status = "disabled";
> >
> >                         reg = <0 0x08804000 0 0x1000>;
> > @@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
> >                                 function = "qup17";
> >                         };
> >
> > -                       sdc1_on: sdc1-on {
> > -                               clk {
> > -                                       pins = "sdc1_clk";
> > -                               };
> >
> > -                               cmd {
> > -                                       pins = "sdc1_cmd";
> > -                               };
> >
> > -                               data {
> > -                                       pins = "sdc1_data";
> > -                               };
> > +                       sdc1_clk: sdc1-clk {
> 
> Ugh. I just noticed that there are way too many blank lines here in
> the output. Happy to have this fixed when applying or I can post a v2.
> 

I can fix that up as I apply it. Will let it sit for a few days to
attract reviews first though.

Regards,
Bjorn
Doug Anderson Feb. 1, 2022, 12:34 a.m. UTC | #3
Hi,

On Mon, Jan 31, 2022 at 4:33 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Mon 31 Jan 18:25 CST 2022, Doug Anderson wrote:
>
> > Hi,
> >
> > On Mon, Jan 31, 2022 at 4:11 PM Douglas Anderson <dianders@chromium.org> wrote:
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > index 40cb414bc377..dc98a87e2871 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > @@ -616,6 +616,9 @@ qfprom: efuse@784000 {
> > >
> > >                 sdhc_1: sdhci@7c4000 {
> > >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > +                       pinctrl-names = "default", "sleep";
> > > +                       pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
> > > +                       pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
> > >                         status = "disabled";
> > >
> > >                         reg = <0 0x007c4000 0 0x1000>,
> > > @@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
> > >
> > >                 sdhc_2: sdhci@8804000 {
> > >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > +                       pinctrl-names = "default", "sleep";
> > > +                       pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> > > +                       pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
> > >                         status = "disabled";
> > >
> > >                         reg = <0 0x08804000 0 0x1000>;
> > > @@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
> > >                                 function = "qup17";
> > >                         };
> > >
> > > -                       sdc1_on: sdc1-on {
> > > -                               clk {
> > > -                                       pins = "sdc1_clk";
> > > -                               };
> > >
> > > -                               cmd {
> > > -                                       pins = "sdc1_cmd";
> > > -                               };
> > >
> > > -                               data {
> > > -                                       pins = "sdc1_data";
> > > -                               };
> > > +                       sdc1_clk: sdc1-clk {
> >
> > Ugh. I just noticed that there are way too many blank lines here in
> > the output. Happy to have this fixed when applying or I can post a v2.
> >
>
> I can fix that up as I apply it. Will let it sit for a few days to
> attract reviews first though.

Sounds good. Thanks! I might end up sending a v2 anyway since I found
a few more fixups, but I'll at least wait a day or two so I don't spam
people too hard.

-Doug
Doug Anderson Feb. 2, 2022, 9:28 p.m. UTC | #4
Hi,

On Mon, Jan 31, 2022 at 4:34 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Mon, Jan 31, 2022 at 4:33 PM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > On Mon 31 Jan 18:25 CST 2022, Doug Anderson wrote:
> >
> > > Hi,
> > >
> > > On Mon, Jan 31, 2022 at 4:11 PM Douglas Anderson <dianders@chromium.org> wrote:
> > > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > > index 40cb414bc377..dc98a87e2871 100644
> > > > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > > @@ -616,6 +616,9 @@ qfprom: efuse@784000 {
> > > >
> > > >                 sdhc_1: sdhci@7c4000 {
> > > >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > > +                       pinctrl-names = "default", "sleep";
> > > > +                       pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
> > > > +                       pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
> > > >                         status = "disabled";
> > > >
> > > >                         reg = <0 0x007c4000 0 0x1000>,
> > > > @@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
> > > >
> > > >                 sdhc_2: sdhci@8804000 {
> > > >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > > +                       pinctrl-names = "default", "sleep";
> > > > +                       pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> > > > +                       pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
> > > >                         status = "disabled";
> > > >
> > > >                         reg = <0 0x08804000 0 0x1000>;
> > > > @@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
> > > >                                 function = "qup17";
> > > >                         };
> > > >
> > > > -                       sdc1_on: sdc1-on {
> > > > -                               clk {
> > > > -                                       pins = "sdc1_clk";
> > > > -                               };
> > > >
> > > > -                               cmd {
> > > > -                                       pins = "sdc1_cmd";
> > > > -                               };
> > > >
> > > > -                               data {
> > > > -                                       pins = "sdc1_data";
> > > > -                               };
> > > > +                       sdc1_clk: sdc1-clk {
> > >
> > > Ugh. I just noticed that there are way too many blank lines here in
> > > the output. Happy to have this fixed when applying or I can post a v2.
> > >
> >
> > I can fix that up as I apply it. Will let it sit for a few days to
> > attract reviews first though.
>
> Sounds good. Thanks! I might end up sending a v2 anyway since I found
> a few more fixups, but I'll at least wait a day or two so I don't spam
> people too hard.

Breadcrumbs: I ended up sending out a v2 (tagged as v3 for other
reasons) that fixes this.

https://lore.kernel.org/r/20220202132301.v3.4.I79baad7f52351aafb470f8b21a9fa79d7031ad6a@changeid/

-Doug
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
index f159b5a6d7ef..918352c097bc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
@@ -676,9 +676,6 @@  &qupv3_id_1 {
 &sdhc_1 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
 	vmmc-supply = <&pp2950_l7b>;
 	vqmmc-supply = <&pp1800_l19b>;
 };
@@ -686,9 +683,8 @@  &sdhc_1 {
 &sdhc_2 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
 	vmmc-supply = <&pp2950_l9c>;
 	vqmmc-supply = <&ppvar_l6c>;
 
@@ -883,47 +879,38 @@  &qup_uart7_rx {
 	bias-pull-up;
 };
 
-&sdc1_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
 
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
 
-	rclk {
-		bias-pull-down;
-	};
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
 };
 
-&sdc2_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
+&sdc1_rclk {
+	bias-pull-down;
+};
 
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
 
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
 
-	sd-cd {
-		pins = "gpio91";
-		bias-pull-up;
-	};
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -1311,6 +1298,12 @@  qup_uart7_sleep_tx: qup-uart7-sleep-tx {
 		bias-pull-up;
 	};
 
+	sd_cd: sd-cd {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
 	tp_int_odl: tp-int-odl {
 		pins = "gpio102";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 78da9ac983db..7a987bc9b758 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -278,10 +278,6 @@  &qupv3_id_1 {
 &sdhc_1 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-
 	non-removable;
 	no-sd;
 	no-sdio;
@@ -293,9 +289,8 @@  &sdhc_1 {
 &sdhc_2 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
 
 	vmmc-supply = <&vreg_l9c_2p9>;
 	vqmmc-supply = <&vreg_l6c_2p9>;
@@ -424,6 +419,40 @@  &qup_uart7_rx {
 	bias-pull-up;
 };
 
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
 &tlmm {
 	bt_en: bt-en {
 		pins = "gpio85";
@@ -496,53 +525,17 @@  qup_uart7_sleep_rx: qup-uart7-sleep-rx {
 		bias-pull-up;
 	};
 
-	sw_ctrl: sw-ctrl {
-		pins = "gpio86";
+	sd_cd: sd-cd {
+		pins = "gpio91";
 		function = "gpio";
-		input-enable;
-		bias-pull-down;
-	};
-};
-
-&sdc1_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
 		bias-pull-up;
-		drive-strength = <10>;
 	};
 
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	rclk {
+	sw_ctrl: sw-ctrl {
+		pins = "gpio86";
+		function = "gpio";
+		input-enable;
 		bias-pull-down;
 	};
 };
 
-&sdc2_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	sd-cd {
-		pins = "gpio91";
-		bias-pull-up;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 40cb414bc377..dc98a87e2871 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -616,6 +616,9 @@  qfprom: efuse@784000 {
 
 		sdhc_1: sdhci@7c4000 {
 			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
+			pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
 			status = "disabled";
 
 			reg = <0 0x007c4000 0 0x1000>,
@@ -2425,6 +2428,9 @@  apss_merge_funnel_in: endpoint {
 
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
+			pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
 			status = "disabled";
 
 			reg = <0 0x08804000 0 0x1000>;
@@ -3943,81 +3949,76 @@  qup_uart15_rx: qup-uart15-rx {
 				function = "qup17";
 			};
 
-			sdc1_on: sdc1-on {
-				clk {
-					pins = "sdc1_clk";
-				};
 
-				cmd {
-					pins = "sdc1_cmd";
-				};
 
-				data {
-					pins = "sdc1_data";
-				};
+			sdc1_clk: sdc1-clk {
+				pins = "sdc1_clk";
+			};
 
-				rclk {
-					pins = "sdc1_rclk";
-				};
+			sdc1_cmd: sdc1-cmd {
+				pins = "sdc1_cmd";
 			};
 
-			sdc1_off: sdc1-off {
-				clk {
-					pins = "sdc1_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc1_data: sdc1-data {
+				pins = "sdc1_data";
+			};
 
-				cmd {
-					pins = "sdc1_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc1_rclk: sdc1-rclk {
+				pins = "sdc1_rclk";
+			};
 
-				data {
-					pins = "sdc1_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc1_clk_sleep: sdc1-clk-sleep {
+				pins = "sdc1_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
 
-				rclk {
-					pins = "sdc1_rclk";
-					bias-bus-hold;
-				};
+			sdc1_cmd_sleep: sdc1-cmd-sleep {
+				pins = "sdc1_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
 			};
 
-			sdc2_on: sdc2-on {
-				clk {
-					pins = "sdc2_clk";
-				};
+			sdc1_data_sleep: sdc1-data-sleep {
+				pins = "sdc1_data";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
 
-				cmd {
-					pins = "sdc2_cmd";
-				};
+			sdc1_rclk_sleep: sdc1-rclk-sleep {
+				pins = "sdc1_rclk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
 
-				data {
-					pins = "sdc2_data";
-				};
+			sdc2_clk: sdc2-clk {
+				pins = "sdc2_clk";
 			};
 
-			sdc2_off: sdc2-off {
-				clk {
-					pins = "sdc2_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc2_cmd: sdc2-cmd {
+				pins = "sdc2_cmd";
+			};
 
-				cmd {
-					pins ="sdc2_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc2_data: sdc2-data {
+				pins = "sdc2_data";
+			};
 
-				data {
-					pins ="sdc2_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc2_clk_sleep: sdc2-clk-sleep {
+				pins = "sdc2_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_cmd_sleep: sdc2-cmd-sleep {
+				pins = "sdc2_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_data_sleep: sdc2-data-sleep {
+				pins = "sdc2_data";
+				drive-strength = <2>;
+				bias-bus-hold;
 			};
 		};