Message ID | 20220202132301.v3.8.Iffff0c12440a047212a164601e637b03b9d2fc78@changeid (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | arm64: dts: qcom: sc7x80: A smattering of misc dts cleanups + herobrine-rev1 | expand |
On Wed, Feb 02, 2022 at 01:23:42PM -0800, Douglas Anderson wrote: > Pullups and drive strength don't belong in the SoC dtsi file. Move to > the board file. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Quoting Douglas Anderson (2022-02-02 13:23:42) > Pullups and drive strength don't belong in the SoC dtsi file. Move to > the board file. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- Reviewed-by: Stephen Boyd <swboyd@chromium.org>
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts index 918352c097bc..82c3c8f0342b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts @@ -826,6 +826,11 @@ &usb_2_hsphy { /* PINCTRL - additions to nodes defined in sc7280.dtsi */ +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + &qspi_cs0 { bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 23e656e51904..6e20e8c07402 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -366,6 +366,11 @@ key_vol_up_default: key-vol-up-default { }; }; +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + &qspi_cs0 { bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 3f9837921c17..a2e3aa6ecdd3 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3293,8 +3293,6 @@ edp_hot_plug_det: edp-hot-plug-det { pcie1_clkreq_n: pcie1-clkreq-n { pins = "gpio79"; function = "pcie1_clkreqn"; - drive-strength = <2>; - bias-pull-up; }; qspi_clk: qspi-clk {
Pullups and drive strength don't belong in the SoC dtsi file. Move to the board file. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v3: - ("Move pcie1_clkreq pull / drive str to boards") new for v3. arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts | 5 +++++ arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 5 +++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 -- 3 files changed, 10 insertions(+), 2 deletions(-)