From patchwork Sun Feb 20 20:18:59 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luca Weiss X-Patchwork-Id: 12752878 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D49A6C4707E for ; Sun, 20 Feb 2022 20:20:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244895AbiBTUUX (ORCPT ); Sun, 20 Feb 2022 15:20:23 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:48118 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244830AbiBTUUK (ORCPT ); Sun, 20 Feb 2022 15:20:10 -0500 Received: from mail.z3ntu.xyz (mail.z3ntu.xyz [128.199.32.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2C3B24B40B; Sun, 20 Feb 2022 12:19:47 -0800 (PST) Received: from localhost.localdomain (ip-213-127-118-180.ip.prioritytelecom.net [213.127.118.180]) by mail.z3ntu.xyz (Postfix) with ESMTPSA id A6745C83E8; Sun, 20 Feb 2022 20:19:45 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=z3ntu.xyz; s=z3ntu; t=1645388385; bh=TwWWnjiNVcrg1vw+oVR7nOZwvCRxaIikKC8Ly3hNj+0=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=rCesBCajY8K6GU7ZcZaj+NX/1uipI8REs2DxjCfInZOMokdp+BfrM7Zr+lLKHbbgw wgM4Bf8NyQFFl5I4ic10e2NL/pDmmBWyumrCqU39bpXTPkxy68AJHYDQEiQx635tbd PJlYGKgcnMQieP8rqsN9IMQ6x2OGhk4uwCFiCXrs= From: Luca Weiss To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Vladimir Lypak , Luca Weiss , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 06/10] arm64: dts: qcom: Add MSM8953 device tree Date: Sun, 20 Feb 2022 21:18:59 +0100 Message-Id: <20220220201909.445468-7-luca@z3ntu.xyz> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220220201909.445468-1-luca@z3ntu.xyz> References: <20220220201909.445468-1-luca@z3ntu.xyz> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Vladimir Lypak Add a base DT for MSM8953 SoC. Signed-off-by: Vladimir Lypak Co-developed-by: Luca Weiss Signed-off-by: Luca Weiss --- Changes in v2: - remove /aliases - fix node name of venus_mem arch/arm64/boot/dts/qcom/msm8953.dtsi | 1326 +++++++++++++++++++++++++ 1 file changed, 1326 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8953.dtsi diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi new file mode 100644 index 000000000000..431228faacdd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -0,0 +1,1326 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo"; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + + l1-icache { + compatible = "cache"; + }; + l1-dcache { + compatible = "cache"; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + }; + + L2_0: l2-cache_0 { + compatible = "cache"; + cache-level = <2>; + }; + + L2_1: l2-cache_1 { + compatible = "cache"; + cache-level = <2>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8953"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + zap_shader_region: memory@81800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x81800000 0x0 0x2000>; + no-map; + }; + + memory@85b00000 { + reg = <0x0 0x85b00000 0x0 0x800000>; + no-map; + }; + + smem_mem: memory@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + memory@86400000 { + reg = <0x0 0x86400000 0x0 0x400000>; + no-map; + }; + + mpss_mem: memory@86c00000 { + reg = <0x0 0x86c00000 0x0 0x6a00000>; + no-map; + }; + + adsp_fw_mem: memory@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1100000>; + no-map; + }; + + wcnss_fw_mem: memory@8e700000 { + reg = <0x0 0x8e700000 0x0 0x700000>; + no-map; + }; + + memory@90000000 { + reg = <0 0x90000000 0 0x1000>; + no-map; + }; + + memory@90001000 { + reg = <0x0 0x90001000 0x0 0x13ff000>; + no-map; + }; + + venus_mem: memory@91400000 { + reg = <0x0 0x91400000 0x0 0x700000>; + no-map; + }; + + mba_mem: memory@92000000 { + reg = <0x0 0x92000000 0x0 0x100000>; + no-map; + }; + + memory@f2d00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf2d00000 0x0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm_requests { + compatible = "qcom,rpm-msm8953"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: rpmcc { + compatible = "qcom,rpmcc-msm8953"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8953-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + clocks = <&xo_board>; + clock-names = "ref"; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = ; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = ; + }; + + rpmpd_opp_svs: opp5 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = ; + }; + }; + }; + }; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x60000 0x8000>; + }; + + hsusb_phy: phy@79000 { + compatible = "qcom,msm8953-qusb2-phy"; + reg = <0x79000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, + <&gcc GCC_QUSB_REF_CLK>; + clock-names = "cfg_ahb", "ref"; + + qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>; + + resets = <&gcc GCC_QUSB2_PHY_BCR>; + + status = "disabled"; + }; + + rng@e3000 { + compatible = "qcom,prng"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tsens0: thermal-sensor@4a9000 { + compatible = "qcom,msm8953-tsens", "qcom,tsens-v2"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x4ab000 0x4>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8953-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 155>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart-console-active-pins { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + uart_console_sleep: uart-console-sleep-pins { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_clk_on: sdc1-clk-on-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: sdc1-clk-off-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: sdc1-cmd-on-pins { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <10>; + }; + + sdc1_cmd_off: sdc1-cmd-off-pins { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_data_on: sdc1-data-on-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc1_data_off: sdc1-data-off-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: sdc1-rclk-on-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: sdc1-rclk-off-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc2_clk_on: sdc2-clk-on-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_clk_off: sdc2-clk-off-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc2_cmd_on: sdc2-cmd-on-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_cmd_off: sdc2-cmd-off-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_data_on: sdc2-data-on-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data_off: sdc2-data-off-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_cd_on: cd-on-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_off: cd-off-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_key_default: gpio-key-default-pins { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c_1_default: i2c-1-default-pins { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + i2c_1_sleep: i2c-1-sleep-pins { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_2_default: i2c-2-default-pins { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + i2c_2_sleep: i2c-2-sleep-pins { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_3_default: i2c-3-default-pins { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + i2c_3_sleep: i2c-3-sleep-pins { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_4_default: i2c-4-default-pins { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + i2c_4_sleep: i2c-4-sleep-pins { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_5_default: i2c-5-default-pins { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + i2c_5_sleep: i2c-5-sleep-pins { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_6_default: i2c-6-default-pins { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + i2c_6_sleep: i2c-6-sleep-pins { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_7_default: i2c-7-default-pins { + pins = "gpio135", "gpio136"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + i2c_7_sleep: i2c-7-sleep-pins { + pins = "gpio135", "gpio136"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_8_default: i2c-8-default-pins { + pins = "gpio98", "gpio99"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + i2c_8_sleep: i2c-8-sleep-pins { + pins = "gpio98", "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8953"; + reg = <0x1800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x1905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8953", "syscon"; + reg = <0x1937000 0x30000>; + }; + + tcsr_phy_clk_scheme_sel: syscon@193f044 { + compatible = "syscon"; + reg = <0x193f044 0x4>; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x200f000 0x1000>, + <0x2400000 0x800000>, + <0x2c00000 0x800000>, + <0x3800000 0x200000>, + <0x200a000 0x2100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + interrupt-controller; + + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + usb3: usb@70f8800 { + compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; + reg = <0x70f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_PCNOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", + "mock_utmi", "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133330000>; + + power-domains = <&gcc USB30_GDSC>; + + qcom,select-utmi-as-pipe-clk; + + status = "disabled"; + + usb3_dwc3: usb@7000000 { + compatible = "snps,dwc3"; + reg = <0x07000000 0xcc00>; + interrupts = ; + phys = <&hsusb_phy>; + phy-names = "usb2-phy"; + + snps,usb2-gadget-lpm-disable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x00>; + + maximum-speed = "high-speed"; + phy_mode = "utmi"; + }; + }; + + sdhc_1: sdhci@7824900 { + compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; + + reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + + mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + + status = "disabled"; + + sdhc1_opp_table: opp-table-sdhc1 { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + sdhc_2: sdhci@7864900 { + compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; + + reg = <0x7864900 0x500>, <0x7864000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table-sdhc2 { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-177770000 { + opp-hz = /bits/ 64 <177770000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + uart_0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + + status = "disabled"; + }; + + i2c_1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b5000 0x600>; + interrupts = ; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_1_default>; + pinctrl-1 = <&i2c_1_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b6000 0x600>; + interrupts = ; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_2_default>; + pinctrl-1 = <&i2c_2_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b7000 0x600>; + interrupts = ; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_3_default>; + pinctrl-1 = <&i2c_3_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b8000 0x600>; + interrupts = ; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_4_default>; + pinctrl-1 = <&i2c_4_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_5: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af5000 0x600>; + interrupts = ; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_5_default>; + pinctrl-1 = <&i2c_5_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_6: i2c@7af6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af6000 0x600>; + interrupts = ; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_6_default>; + pinctrl-1 = <&i2c_6_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_7: i2c@7af7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af7000 0x600>; + interrupts = ; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_7_default>; + pinctrl-1 = <&i2c_7_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_8: i2c@7af8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x7af8000 0x600>; + interrupts = ; + clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_8_default>; + pinctrl-1 = <&i2c_8_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8953-apcs-kpss-global", "syscon"; + reg = <0xb011000 0x1000>; + #mbox-cells = <1>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + #address-cells = <0x01>; + #size-cells = <0x01>; + ranges; + + frame@b121000 { + frame-number = <0>; + interrupts = , + ; + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = ; + reg = <0xb123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = ; + reg = <0xb124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = ; + reg = <0xb125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = ; + reg = <0xb126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = ; + reg = <0xb127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = ; + reg = <0xb128000 0x1000>; + status = "disabled"; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 9>; + trips { + cpu0_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 10>; + trips { + cpu1_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 11>; + trips { + cpu2_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 12>; + trips { + cpu3_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 4>; + trips { + cpu4_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu4_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu4_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 5>; + trips { + cpu5_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu5_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu5_alert>; + cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 6>; + trips { + cpu6_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu6_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu6_alert>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 7>; + trips { + cpu7_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu7_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu7_alert>; + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +};