From patchwork Wed Feb 23 19:29:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bhupesh Sharma X-Patchwork-Id: 12757452 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 339C1C4332F for ; Wed, 23 Feb 2022 19:30:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244421AbiBWTbE (ORCPT ); Wed, 23 Feb 2022 14:31:04 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48598 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244414AbiBWTbB (ORCPT ); Wed, 23 Feb 2022 14:31:01 -0500 Received: from mail-pj1-x1035.google.com (mail-pj1-x1035.google.com [IPv6:2607:f8b0:4864:20::1035]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 91A5C48330 for ; Wed, 23 Feb 2022 11:30:33 -0800 (PST) Received: by mail-pj1-x1035.google.com with SMTP id ev16-20020a17090aead000b001bc3835fea8so3994657pjb.0 for ; Wed, 23 Feb 2022 11:30:33 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=KmFecBJXu85lugtXBovemAEOgrgg00YzaxmKlZmZCWI=; b=GvWTe9EdIrEWa4n8j3LFmguRLyZZ/x/JzkGnC+OgDaAdtEsmlSiaUMB9MUfSaaFsae aGirqWkpahKgDUjWqc8q++G1MC/nwdPWhsRbH6C9UjbIZ/NXiZTD8RWaj1Z8USht3ql1 R2sPl9xbXWLusuAVjQ2j9zpDzJ+szhtJFc4AnItOpddp20k53oT1OXVjxlnQ+/nm1nKC AucBesYvcvcQ1Cw6jHSnhkLXeTb/58zNB/DpPZ7BJjPHb/cs1OvuWQrPAFNFGwvNbRgK l0acvSP2BwCSP/0hiky4/5H/sTR6J57LLqKJUdhkHWSj1Vi7HaqgaQy6MZjYqKlMeUoP KF/w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=KmFecBJXu85lugtXBovemAEOgrgg00YzaxmKlZmZCWI=; b=XZymGRhb9nCuF8JruE/noyxHYKSps7A1DONUFURnnig/UI9oqBiflFhCQrNb5ERwZ8 jgTEzpE8cQFe2PPAsyW6SdFjgBBNNxhxz2COjVQKHvHx2zZyfhy8tnyztdcPK/5bQAjS es/rmvt5zCQ3PGJf31skgiKExJDM4e/0OVknpDomc3z8Mv8fdL7dACc5YnxFNS/Hgmkd YHj1jQCPxGHNS3yX9CfiJl87pacxWYPAex2Jr8MbjnbwgDKe0YiwHv10IMXKhLT7y7iC uehTo4qd8B8C/fBBNwCz2uz0tSXVCBV7W/PfCf9//L++iF0ksepqEOjiDZwha/NAobXM 0rXg== X-Gm-Message-State: AOAM531NFouYRakkzRMKaIfG6R/QEInrU4sVD3fvrF3mhWzhtzUIU/TU 99fe/DgmFgccBL1YZDeMqGL/u8Ay3IW30w== X-Google-Smtp-Source: ABdhPJw94GGss3vtJbnuOhz361xIgMd72QCnHAD7Yh9y4pzE3X1A7Zj9nn9F3HCu9r33h+iNnG1tBA== X-Received: by 2002:a17:903:2405:b0:150:5f2:9bed with SMTP id e5-20020a170903240500b0015005f29bedmr1101684plo.14.1645644632783; Wed, 23 Feb 2022 11:30:32 -0800 (PST) Received: from localhost.localdomain ([2402:3a80:180f:6b3c:fda0:57e9:7d44:2aa7]) by smtp.gmail.com with ESMTPSA id z10-20020a17090a8b8a00b001b8d20074c8sm3719917pjn.33.2022.02.23.11.30.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 23 Feb 2022 11:30:32 -0800 (PST) From: Bhupesh Sharma To: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org Cc: bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com, lorenzo.pieralisi@arm.com, agross@kernel.org, bjorn.andersson@linaro.org, svarbanov@mm-sol.com, bhelgaas@google.com, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org Subject: [PATCH 5/6] arm64: dts: qcom: sm8150: Add pcie nodes for SM8150 Date: Thu, 24 Feb 2022 00:59:45 +0530 Message-Id: <20220223192946.473172-6-bhupesh.sharma@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220223192946.473172-1-bhupesh.sharma@linaro.org> References: <20220223192946.473172-1-bhupesh.sharma@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add nodes for the two PCIe controllers founds on the SM8150 SoC. Cc: Bjorn Andersson Cc: Rob Herring Signed-off-by: Bhupesh Sharma --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 243 +++++++++++++++++++++++++++ 1 file changed, 243 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 6012322a5984..b97f04ec9c6b 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1626,6 +1626,203 @@ system-cache-controller@9200000 { interrupts = ; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + iommus = <&apps_smmu 0x1d80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx */ + <0 0x1c06400 0 0x200>, /* rx */ + <0 0x1c06800 0 0x1f0>, /* pcs */ + <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1e00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x1c0e200 0 0x170>, /* tx0 */ + <0 0x1c0e400 0 0x200>, /* rx0 */ + <0 0x1c0ea00 0 0x1f0>, /* pcs */ + <0 0x1c0e600 0 0x170>, /* tx1 */ + <0 0x1c0e800 0 0x200>, /* rx1 */ + <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -2327,6 +2524,52 @@ qup_spi19_default: qup-spi19-default { drive-strength = <6>; bias-disable; }; + + pcie0_default_state: pcie0-default { + perst { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio36"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + perst { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; remoteproc_mpss: remoteproc@4080000 {