| Message ID | 20220328143035.519909-4-vkoul@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: Get rid of some warnings | expand |
On 28/03/2022 16:30, Vinod Koul wrote: > The soc node expects all the nodes to have unit addresses. The > qup-opp-table does not have that which causes warnings: > > arch/arm64/boot/dts/qcom/sm8250.dtsi:916.32-933.5: > Warning (simple_bus_reg): /soc@0/qup-opp-table: > missing or empty reg/ranges property > > Move the qup-opp-table out of soc node to fix these warnings > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/sm8250.dtsi | 38 ++++++++++++++-------------- > 1 file changed, 19 insertions(+), 19 deletions(-) > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index fdaf303ba047..b120babdb26c 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -701,6 +701,25 @@ CLUSTER_PD: cpu-cluster0 { }; }; + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -913,25 +932,6 @@ rng: rng@793000 { clock-names = "core"; }; - qup_opp_table: qup-opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-120000000 { - opp-hz = /bits/ 64 <120000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - gpi_dma2: dma-controller@800000 { compatible = "qcom,sm8250-gpi-dma"; reg = <0 0x00800000 0 0x70000>;
The soc node expects all the nodes to have unit addresses. The qup-opp-table does not have that which causes warnings: arch/arm64/boot/dts/qcom/sm8250.dtsi:916.32-933.5: Warning (simple_bus_reg): /soc@0/qup-opp-table: missing or empty reg/ranges property Move the qup-opp-table out of soc node to fix these warnings Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 38 ++++++++++++++-------------- 1 file changed, 19 insertions(+), 19 deletions(-)