diff mbox series

[1/2] arm64: dts: qcom: sm6350: Fix naming of uart9

Message ID 20220408114205.234635-1-luca.weiss@fairphone.com (mailing list archive)
State Accepted
Headers show
Series [1/2] arm64: dts: qcom: sm6350: Fix naming of uart9 | expand

Commit Message

Luca Weiss April 8, 2022, 11:42 a.m. UTC
The uart9 was previously mistakenly called uart2. Fix this.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi              | 6 +++---
 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d7c9edff19f7..ef43af39569c 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -529,13 +529,13 @@  qupv3_id_1: geniqup@9c0000 {
 			ranges;
 			status = "disabled";
 
-			uart2: serial@98c000 {
+			uart9: serial@98c000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0 0x98c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart2_default>;
+				pinctrl-0 = <&qup_uart9_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
@@ -974,7 +974,7 @@  tlmm: pinctrl@f100000 {
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 157>;
 
-			qup_uart2_default: qup-uart2-default {
+			qup_uart9_default: qup-uart9-default {
 				pins = "gpio25", "gpio26";
 				function = "qup13_f2";
 				drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index adb6ca2be2a5..67d14bda3797 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -23,7 +23,7 @@  / {
 	qcom,board-id = <8 32>;
 
 	aliases {
-		serial0 = &uart2;
+		serial0 = &uart9;
 	};
 
 	chosen {
@@ -332,7 +332,7 @@  &tlmm {
 	gpio-reserved-ranges = <13 4>, <56 2>;
 };
 
-&uart2 {
+&uart9 {
 	status = "okay";
 };