diff mbox series

[v2,3/6] arm64: dts: qcom: msm8996: User generic node name for DMA

Message ID 20220410175056.79330-4-singh.kuldeep87k@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v2,1/6] ARM: dts: qcom: apq8064: User generic node name for DMA | expand

Commit Message

Kuldeep Singh April 10, 2022, 5:50 p.m. UTC 
Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Krzysztof Kozlowski April 10, 2022, 7:09 p.m. UTC | #1 
On 10/04/2022 19:50, Kuldeep Singh wrote:
> Qcom BAM DT spec expects generic DMA controller node name as
> "dma-controller" to enable validations.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f0f81c23c16f..bbe677b9e5bf 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -707,7 +707,7 @@  tsens1: thermal-sensor@4ad000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		cryptobam: dma@644000 {
+		cryptobam: dma-controller@644000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x00644000 0x24000>;
 			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;